• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.46-53
• /
• 2010

Purpose: The static image of nuclear medicine study should be acquired without a motion, however, it is difficult to acquire static image without movement for the serious patients, advanced aged patients. These movements cause decreases in reliability for quantitative and qualitative analysis, therefore re-examination was inevitable in the some cases. Consequently, in order to improve the problem of motion artifacts, the authors substituted the dynamic acquisition technique for the static acquisition, using motion correction. Materials and Methods: A capillary tube and IEC body phantom were used. First, the static image was acquired for 60 seconds while the dynamic images were acquired with a protocol, 2 sec/frame${\times}$30 frames, under the same parameter and the frames were summed up into one image afterwards. Also, minimal motion and excessive motion were applied during the another dynamic acquisition and the coordinate correction was applied towards X and Y axis on the frames where the motion artifact occurred. But the severe blurred images were deleted. Finally, the resolution and counts were compared between the static image and the summed dynamic images which before and after applying motion correction, and the signal of frequency was analysed after frequency spatial domain was transformed into 2D FFT. Supplementary examination, the blind test was performed by the nuclear medicine department staff. Results: First, the resolution in the static image and summed dynamic image without motion were 8.32 mm, 8.37 mm on X-axis and 8.30 mm, 8.42 mm on Y-axis, respectively. The counts were 484 kcounts, 485 kcounts each, so there was nearly no difference. Secondly, the resolution in the image with minimal motion applying motion correction was 8.66 mm on X-axis, 8.85 mm on Y-axis and had 469 kcounts while the image without motion correction was 21.81 mm, 24.02 mm and 469 kcounts in order. So, this shows the image with minimal motion applying motion correction has similar resolution with the static image. Lastly, the resolution in the images with excessive motion applying motion correction were 9.09 mm on X-axis, 8.83 mm on Y-axis and had 469 kcounts while the image without motion correction was 47.35 mm, 40.46 mm and 255 kcounts in order. Although there was difference in counts because of deletion of blurred frames, we could get similar resolution. And when the image was transformed into frequency, the high frequency was decreased by the movement. However, the frequency was improved again after motion correction. In the blind test, there was no difference between the image applying motion correction and the static image without motion. Conclusion: There was no significant difference between the static image and the summed dynamic image. This technique can be applied to patients who may have difficulty remaining still during the imaging process, so that the quality of image can be improved as well as the reliance for analysis of quantity. Moreover, the re-examination rate will be considerably decreased. However, there is a limit of motion correction, more time will be required to successfully image the patients applying motion correction. Also, the decrease of total counts due to deletion of the severe blurred images should be calculated and the proper number of frames should be acquired.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.89-110
• /
• 1998

Variations of backfill load on the metal-polyethylene composite( MPC ) pipes buried in various trenches backfill afterward were investigated in this paper. The backfill loads obtained by the finite element method( FBM ) were compared with those calculated by the well-known MarstonBpangler(M-5) theory. The reliability of the finite element analysis used in this study was examined by an inaitu best for the buried pipe. The backfill lords and deflections on the real-size pipe buried on-site were measured while increasing the backfill height. In addition, further investigations were made for the variations of the backfill loads as a function of several important parameters such as the backfill soil type, bach. height$(\leq4.0m)$, diameter of the pipe$(B.$1.0m)$, and trench width($\leq 3.0 B_c$). It is confirmed that the M-S theory predicts reasonably well the backfill loafs of the MPC of the M-S backfill coils be 0.13 and 0.15 for the SC and SM coils in the D unman soil model, respectively. The load ratio, Wu-s/WwgM for a narrow trench varies negligibly with the back(111 height but fiends to increase for a wide trench. The ratio increases with increasing diameter of the pipe for a narrow trench while decreasing for a wide trench. It is also found that the ratio generally decreases as the degree of compaction increases and BM soil exhibits larger load ratio than that of SC soil.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.156-175
• /
• 2013

The purpose of this study was to verify that the impacts of experience of donation for education to improve the teaching efficacy of pre-technology teacher. The Invention experience of donation for education was performed with Invent-touring sponsored by Chunnam National University Invention Education Center for Teachers and was included by development of creative problem solving program, program execution and evaluation. Research participants were Technology education Majors and minors 20 students. The active locations were D children community center, K alternative school, D Elementary School and D middle school. For the study, various literature researches were reviewed intensively about donation for education and teaching efficacy. The instrument for the study was the modified STEBI(Science Teaching Efficacy Beliefs Instrument) for technology education by 3 experts. This study was designed by single group pre and post test design (One-Group Pretest-Posttest Design) and was conducted by the pre-test and post-test. Check the reliability of the tool was conducted with Cronbach ${\alpha}$ coefficient analysis, pre-test 0.840, post-test 0.746. The analysis of data from the 5% significance level, paired sample t-test was performed using the SPSS 19.0 statistical tool. The results were as follows: 1. Teaching efficacy of pre-technology teachers who participated in the invention experience for educational donation technology has improved. 72. The qualitative study was performed by the interviews with students who participated in. Humanism was positively change and learning opportunity was provided to develop the competence of technology education teacher. Based upon the conclusion of this study, the donation activity for invention education need to use learning strategies for pre-technology teacher to improve teaching efficacy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1443-1451
• /
• 2008

This study was performed to develop menu satisfaction index in Business & Industry (B&I) food service and to survey customer's menu satisfaction using the index. The menu satisfaction index included 16 items with Likert 5 point. Cronbach's alpha to assess the internal reliability of the developed scales was 0.8917, which indicated highly reliable. Construct validity was assessed by principal components analysis and then four factors explaining 65.964% of the total variance were found. Among the 15 items of menu satisfaction, the average scores of all items were above 3.0 out of 5. As a result of analysis on menu satisfaction factors, 'propriety of food temperature' (3.52 out of 5) was the highest consideration followed by 'sufficiency of format' (3.46), 'excellence in food' (3.35) and 'well-being orientation' (3.31). It could be said that customer's perception on the menu quality was very positive. Four factors were correlated with overall menu satisfaction positively. Especially, 'excellence in food', and 'well-being orientation' and 'sufficiency of format' affected significantly on overall menu satisfaction. It concluded that customers were satisfied with portion size, temperature, price but their needs for taste and health/nutrition-related service would be increased. The menu satisfaction developed in this study should be applied to other B & I food service operation by type.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.73-81
• /
• 2015

This research is designed to analyze the moderating effect of social capital between organizational slack and managerial practices for open innovation. After controlling the firm size, firm age, and environmental uncertainty, we test two hypotheses. First, we test the hypothesis that organizational slack has a positive effect on managerial practices for open innovation. Especially we focus on the managerial innovation and open innovation because recently managerial innovation and open innovation are more and more important. Second, we test the moderating role of social capital between organizational slack and managerial practices for open innovation. Because social capital is a kind of networking activity, we assume that social capital can contribute to managerial practices for open innovation through the networking activity. For this research, we administered the questionnaire surveys, and got the 250 effective data (companies) in Korea. Then we used the validity, reliability, correlation and multiple regression analysis by means of SPSS 18.0. As a result, we can find the two meaningful results. First, organizational slack, especially not absorbed slack but unabsorbed slack, has positive effect on managerial practices for open innovation. It is because absorbed slack such as excessive facilities, machines, or employees is not useful in managerial practices for open innovation. On the other hand, unabsorbed slack is useful in managerial practices for open innovation because unabsorbed slack such as excessive money or securities is very flexible and active. Taken together, the relationship between managerial practices for open innovation and unabsorbed slack is proven in terms of flexibility. Second, social capital has a moderating effect positively between organizational slack, especially not absorbed slack but unabsorbed slack, and managerial practices for open innovation. A prior study related to the relationship between managerial practices for open innovation and social capital doesn't exist yet, so this analysis result is very meaningful in academic respect. But this research has some limitations. First, this research is analyzed by limited region (Korea) and samples (250 companies), so more global regions and samples are recommended in the future. Second, we focus on managerial practices for open innovation in this paper, so the studies about technological practices for open innovation are recommended in the future.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.155-165
• /
• 2015

The objective of this study is to verify the structural correlations among trust, satisfaction, commitment, relation-continuing intention for internet fashion shopping mall. The statistical significance of questionnaire survey data for 360 customers was verified by using SPSS 18.0 and AMOS 18.0 statistical programs with significance levels of the ${\alpha}=0.05$. First of all, Cronbach's ${\alpha}$ was also assessed to verify the reliability of the measuring tool, and the fitness of the model were also verified to investigate the fitness of this research model. Finally, structural equation model analysis was performed to verify the structural correlations among the structural correlations among trust, satisfaction, commitment, relation-continuing intention for internet fashion shopping mall. On the basis of the empirical analysis, the following key results were drawn. First, trust for internet fashion shopping mall has the positively significant effects on satisfaction. Second, trust for internet fashion shopping mall has the positively significant effects on commitment. Third, trust for internet fashion shopping mall has the positively significant effects on relation-continuing intention. Fourth, satisfaction for internet fashion shopping mall has the positively significant effects on relation-continuing intention. Fifth, commitment for internet fashion shopping mall has the positively significant effects on relation-continuing intention. Sixth, the path of trust${\rightarrow}$satisfaction${\rightarrow}$relation-continuing intention for internet fashion shopping mall has the significant indirect effects, therefore the mediation effect of satisfaction was significant. Seventh, the path of trust${\rightarrow}$commitment${\rightarrow}$relation-continuing intention for internet fashion shopping mall has the significant indirect effects, therefore the mediation effect of commitment was significant.

• Management & Information Systems Review
• /
• v.37 no.3
• /
• pp.1-25
• /
• 2018

This research performed the empirical test for the effects of learning transfer on perceived usefulness, perceived ease of use, self-efficacy and work environment using 390 employees who have experienced e-learning in domestic and foreign companies. Analyzed the mediating effects of self-efficacy and work environment in addition to direct effect of each factor on learning transfer. The results showed that perceived usefulness and perceived ease-of-use of e-learning learner had a positive(＋) effect on self-efficacy and a positive influence on supervisor and peer support and organizational climate. Self-efficacy showed a positive effect on learning transfer, and supervisor support, peer support and organizational climate had a positive influence on learning transfer as well. Perceived usefulness also had a positive effect on learning transfer. However, perceived ease-of-use had no significant effect on learning transfer. As a result of the mediating effect analysis, self-efficacy and work environment were analyzed to have mediating effects between perceived usefulness, perceived ease of use, and learning transfer. The implications of this study are as follows. First, this study designed a new research model that reflects factors influencing the effect of learning transfer on acceptance of e-learning that is common in corporate education. It has derived a research model of perceived usefulness and perceived ease-of-use, which were used as mediating variables for external characteristics factors, as independent variables, using self-efficacy and work environment as mediating variables, which were studied as external factors. Second, most of the studies on technology acceptance model and learning transfer are conducted in a single country. The reliability was enhanced by testing the study models using different samples from 26 countries. Third, perceived usefulness and ease-of-use in existing studies have been considered as key determinants of acceptance intention and learning transfer. This study explored the mediating effects of learner and environmental factors on the accepted information technology and strengthened and supplemented the path of learning transfer of perceived usefulness and ease-of-use. In addition, based on the sample analysis of various countries used in this study, it is expected that future international comparative studies will be possible.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.39-48
• /
• 2010

Recreation forests are in the spotlight as the place for personality development, mind and body comfort, companionship, and environment education in forests and valleys. Visitors to recreation forests have been on the increase along with booming in recreation forest building since 1988. Recreation forests are being categorized according to some features such as regional and environmental condition. Recreation forests, however, have not met the expectations of some visitors who want to take a rest with calmness due to the influence of the 5-day-work-week system, increasing interest in rest, leisure, and well-being, and users converge during weekends, summer, and the tourist season. In order to improve visitors' satisfaction efficiently, this study surveyed the level of satisfaction in each cluster based on the precedent study which had classified 85 national or public recreation forests in Korea into clusters. Questionnaires were distributed properly to each cluster and, of the 1,132 questionnaires collected, 1,015 were valid and used for analysis. Reliability of questionnaires and statistical validity of the model were verified. As a result, there are meaningful differences in the ranking of independent variables which affect the level of satisfaction according to clusters. Variables in rest and fatigue recovery have the strongest influence on the level of satisfaction in the clusters of potential factor, internal activation factor, and mixed potential capacity factor. In the use performance and visiting condition factor cluster, appropriateness of visit cost is most influential and, in the education cluster, connectivity with tourist attractions around it is most affective. These results can provide priority in services and maintenance of recreation forests for improving the level of satisfaction and differentiate the distribution of resources according to clusters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.239-240
• /
• 2008

As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.

• Journal of East-West Nursing Research
• /
• v.8 no.1
• /
• pp.113-125
• /
• 2003

This study is a descriptive investigation into the image of nurses, and attempted to help to advance the profession of nursing and to provide basic data for developing strategies to improve the image of nurses. The Subject of this study was a group of 380 persons from a K Medical Centre in Seoul, including the hospital patients and their guardians, as well as the doctors, assistants and hospital administrative staff. The data have been collected from the 10th to the 30th of May, 2003. We have developed a research tool of 40 questions divided into three categories using a tool developed by Kim, H.J and KIm, H.O.(2001) verifying its construct validity. The reliability of the tool was Cronbache's ${\alpha}=.97$, and by categories, Cronbach's ${\alpha}=.86$ for service image, Cronbach's ${\alpha}=.96$ for professional image and Cronbache's ${\alpha}=.90$ for social image. The collected data have been analysed according to the purpose of this study using SPSS WIN 11.0 for real number, percentage, factors analysis, multiple regression analysis, ANOVA and $x^2$-test, and the results are as follows: 1) There was a significant difference in the image of nurses by job series of the subjects; from patients and guardians for 4.01 to doctors 3.62, assistants 3.54 and staff members 3.41 (F=36.14, p=.000). As well, there was a significant difference in service, professional and social image categories according to the position of the subjects ($F=20.36{\sim}42.35$, p=.000). 2) The main factors that affect on formation the nurse's imaging came by direct experiences with nurses at hospitals for 81.3%, by looking at the every life of the nurses that the subjects personally know for 15.5%, by mass media for 1.6% and by the accounts from the others for 1.6%. 3) 78.4% of the subjects considered that the image of nurses on mass media is described better than for real, 8.2% believed that the image is described worse than for real, and only 13.2% of the subjects perceived that the image of nurses on mass media corresponds the image of nurses in actual life. 4) 74.5% of the subjects said that they got a better image of nurses after their hospitalization while 2% got a worse one and 23.5% said to have had no changes, and the period of hospitalization had no relevance to the image of nurses (X2=5.04, P=.489). However, while 16.8% of the subjects who spent less than one week in hospital said that they got a better image of nurses, 27.5% of those who spent longer than four weeks got a better image of nurses. 5) There was a significant difference in the total image points of nurses by the patients and their guardians according to the period of hospitalization; 4.14 for 1 to 2 weeks, 4.07 for 2 to 4 weeks, 4.02 for 4 weeks and longer and 3.80 for less than a week (F=3.40, P=.019). Upon the results stated above, I should like to propose as below: 1) An investigative enquiry is needed to improve the image of nurses as though being a nurse is very hard and difficult. 2) A continuous monitoring in mass media is needed to create a positive image of nurses.