• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.77-83
• /
• 2022

Nand flash memory requires an Erase-Before-Write operation structurally. In order to solve this problem, it can be solved by classifying a page (hot data page) where data update operation occurs frequently and storing it in a separate block. The MHF (Multi Hash Function Framework) technique records the frequency of data update requests in the system memory, and when the recorded value exceeds a certain standard, the data update request is judged as hot data. However, the method of simply counting only the frequency of the data update request has a limit in judging it as accurate hot data. In addition, in the case of a technique that determines the persistence of a data update request, the fact of the update request is recorded sequentially based on a time interval and then judged as hot data. In the case of such a persistence-based method, its implementation and operation are complicated, and there is a problem of inaccurate judgment if frequency is not considered in the update request. This paper proposes a lightweight hot data determination technique that considers both frequency and persistence in data update requests.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.3
• /
• pp.35-43
• /
• 2012

Following the companion paper (I. Comparisons with Well-known Seismic Code and Site Response Characteristics), several acceleration data recorded during recent earthquake events in Korea were analyzed to verify the suitability of the proposed two-parameters site classification system and the corresponding site coefficients. For all of rock-soil site pairs less than 30 km distant, response spectrums and corresponding site coefficients, $F_a$ and $F_v$, were determined. Unfortunately, some of data have an eccentric error, where the spectral acceleration of rock site is more amplified than that of soil site. The $F_a$ and $F_v$ for all of pairs except the pairs of error were compared with those in the current code and the proposed system. The $F_a$ and $F_v$ from the recorded motions show definitely different trend from that of the current code. In addition, the site coefficients from recorded motions at four 765 kV substation sites, which are several hundred meters distant, have a remarkably similar trend and absolute values to those in proposed two-parameters site classification system. Based on earthquake motions recorded in domestic areas including data from the four 765 kV substation sites, the two-parameters site classification and site coefficients are superior to the results obtained from the current Korean seismic code.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.497-502
• /
• 2001

Three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure was studied by using a holographic interferometric tomography. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multidirectional holographic interferogram was recorded by employing a double-reference beam, double-exposure holographic technique in order to eventually reconstruct the temperature fields. The recorded interferometric data appear good enough to be further processed to extract optical pathlength data from them and finally reconstruct the temperature fields. A complete analysis of the temperature fields including the field reconstructions and comparison with thermocouple measurements is underway and will be reported shortly.

• Journal of the Korean Home Economics Association
• /
• v.49 no.3
• /
• pp.39-53
• /
• 2011

The purpose of this study was to develop a 'Solution-Focused Brief Play Therapy' and analyze children's responses to its various therapeutic techniques. The participants were three boys and three girls, all aged between 11 and 10 years, living in an orphanage on the outskirts of Seoul. Each child received 7-10 therapy sessions, each lasting 90 minutes. All sessions were video-taped and recorded verbatim. These data, along with the observational notes recorded by the researcher, were subjected to a qualitative data analysis(Creswell, 2002). The results showed not only that children set their goals and evaluated themselves objectively but also suggested solutions to meet their goals by doing something meaningful to themselves.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1609-1614
• /
• 2003

In this study, a practical holographic interferometric tomography system, which is instantaneous and non-contact for measuring three dimensional flow field, was developed. The system consists of holographic recording/reconstruction system, fringe analysis code and computational tomography code and it is developed with Gill environment for general users. The developed system was applied to three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multi-directional holographic interferograms was recorded by employing a double-reference beam, double-exposure holographic technique. Optical pathlength data were extracted from the recorded interferometric data and finally three dimensional temperature field inside the cube was reconstructed.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.147-149
• /
• 1999

This paper deals with the determination of generator/exciter model parameters for a Cheju Hanlim steam turbine unit. Using the recorded data from the generator characteristic tests, the model parameters have been derived and verified by comparing the simulation results and recorded data. In addition to it, the closed-loop performance of voltage control on no-load condition has been assessed in the frequency domain by taking advantage of derived generator/exciter model parameters.

• Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.212-218
• /
• 2008

Time series changes in the chlorophyll $\alpha$ concentrations before and after the ship Prestige oil spill on 13 November 2002 were analyzed using NCEP wind data and ocean color data. Following the oil spill, southwesterly winds pushed the oil towards the Spanish coast. In addition, the daily chlorophyll $\alpha$ concentration decreased dramatically from the middle of November to the end of December 2002, with the minimum value being recorded in December. Additionally, the mean chlorophyll $\alpha$ concentration in November and December 2002 was lower than the average value recorded for the same months from 2000 to 2005; however, with the exception of 2000, the concentration was higher in October 2002 before the spill and in January-March 2003 after the spill during the same period from 2000 to 2005.

• Atmosphere
• /
• v.24 no.4
• /
• pp.481-489
• /
• 2014

The Chugugi and Wootaek data of Gyeongsang-do (Dagu, Jinju, Goseong) were restored from "Gaksadeungnok", the governmental documents reported by the local government to the central during the Joseon Dynasty, and analyzed. The duration of the restored data represents 6 years for Daegu (1863, 1872, 1890, 1897, 1898, and 1902), 3 years for Jinju (1897, 1898, and 1900), and 2 years for Goseong (1871 and 1873). Total number of the restored data was 134, including 83 in Daegu, 25 in Jinju, and 26 in Goseong with the period ranging from March to September. The summer data from June to August accounts for approximately 50% (73 data), while the April data also shows relatively high number of 22, followed by September and March. Most data was collected from March to October, while this time winter data was not found even in October. The rainfall patterns using Chugugi data were investigated. First, the number of days with rainfall by annual mean showed 41 days in Daegu, 39 in Jinju, 33 in Goseong, respectively. In terms of the time series distribution of daily rainfall, the ratio between the number of occurrences with over 40 mm of heavy rainfall and the number of rainy days showed 14 times (8%) in Daegu, 24 (39%) in Jinju, and 4 (6%) in Goseong, respectively. The maximum daily rainfall during the period was recorded with 80mm in Jinju on August 24, 1900. The result of analyzing monthly amount of rainfall clearly indicated more precipitation in summer (June, July and August) with the relatively high records of 284 mm and 422 mm in April, 1872 and July, 1902, respectively, in Daegu, while Jinju recorded the highest value of 506 mm in June, 1898. When comparing the data with those observed by Chugugi in Seoul during the same period from "Seungjeongwonilgi", the monthly rainfall patterns in Daegu and Seoul were quite similar except for the year of 1890 and 1897 in which many data were missing. In particular, in June 1898 the rainfall amount of Jinju recorded as much as 506 mm, almost 4 times of that of Seoul (134 mm). Based on this, it is possible to presume that there was a large amount of the precipitation in the southern region during 1898. According to the calculated result of Wootaek data based on Chugugi observations, the unit of 1 'Ri' and 1 'Seo' in Daegu can be interpreted into 18.6 mm and 7.8 mm. When taking into consideration with the previous result found in Gyeonggi-do (Cho et al., 2013), 1 'Ri' and 1 'Seo' may be close to 20.5 mm and 8.1 mm, however, more future investigations and studies will be essential to verify the exact values.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.122.2-122.2
• /
• 2010

Knowledge of ground thermal properties is most important for the proper design of BHE(borehole heat exchanger) systems. The configure type, pipe size and thermal performance of the BHE is highly dependent on the ground source heatpump system-efficiency and instruction cost. Thermal response tests with mobile measurement devices were developed primarily for in-situ determination of design data for Standing Column Well apply. The main purpose has been to determine in-situ values of effective ground thermal conductivity and thermal resistance, including the effect of ground-water flow and natural convection in the boreholes. The test rig is set up on a some trailer, and contains a sub-circulation pump, a boiler, temperature sensors, flow meter and a data logger for recording the temperature and circulation fluid flow data. A constant heating power is injected into the SCW through the test rig and the resulting temperature change in the SCW is recorded. The recorded temperature data are analysed with a line-source model, which gives the effective in-situ values of rock thermal conductivity and thermal resistance of SCW.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.8 s.251
• /
• pp.764-771
• /
• 2006

Knowledge of ground thermal properties is most important for the proper design of large BHE(borehole heat exchanger) systems. Thermal response tests with mobile measurement devices were first introduced in Sweden and USA in 1995. Thermal response tests have so far been used primarily for in insitu determination of design data for BHE systems, but also for evaluation of grout material, heat exchanger types and ground water effects. The main purpose has been to determine insitu values of effective ground thermal conductivity, including the effect of ground-water flow and natural convection in the boreholes. Test rig is set up on a small trailer, and contains a circulation pump, a heater, temperature sensors and a data logger for recording the temperature data. A constant heat power is injected into the borehole through the pipe system of test rig and the resulting temperature change in the borehole is recorded. The recorded temperature data are analysed with a line-source model, which gives the effective insitu values of rock thermal conductivity and borehole thermal resistance.