• Archives of Plastic Surgery
• /
• v.46 no.2
• /
• pp.147-151
• /
• 2019

Background Successful aesthetic plastic surgery is devoid of both unsightly scarring and postoperative disfigurement. Patients undergoing midface-lifting surgery are very often disconcerted by an altered side hairline, including sideburns, despite considerable amelioration of facial wrinkles. This study was conducted to identify an effective means of approaching an altered hairline and the unavoidable scarring arising from midface-lifting surgery. Methods A total of 37 patients who underwent corrective surgery with hair transplantation for hair loss or scar deformity arising from midface-lifting surgery from June 2014 to June 2017, and were observed for more than 6 months thereafter, were enrolled in the study. Prior to corrective surgery, the patients were administered a multiple-choice survey regarding their dissatisfaction arising from midface-lifting surgery. Among the 37 patients, 24, 12, and one underwent donor harvesting by the strip method, non-shaven follicular unit extraction, and partial shaving follicular unit extraction, respectively. Additionally, 33 of the 37 patients underwent hair transplantation in the frontotemporal recess area along with hairline correction surgery. The average number of transplanted grafts was 1,025. Results Surgery resulted in a natural and satisfactory appearance in all patients. The average patient and physician subjective satisfaction scores were 4.6 and 4.8, respectively. No adverse events such as folliculitis occurred. Conclusions Side-hairline correction surgery by hair transplantation can be considered an effective method of realigning an altered hairline accompanied by scars following midface-lifting surgery.

• Korean Journal of Materials Research
• /
• v.31 no.3
• /
• pp.172-180
• /
• 2021

In this study, using the plasma spray method, tensile and compression fatigue tests are performed in saline solution to examine the effect of Ti undercoat on corrosion fatigue behavior of alumina-coated specimens. The alumina-coated material using Ti in the undercoat shows better corrosion fatigue strength than the base material in the entire stress amplitude range. Fatigue cracking of UT specimens occurs in the recess formed by grit-blasting treatment and progresses toward the base metal. Subsequently, the undercoat is destroyed at a stage where the deformation of the undercoat cannot follow the crack opening displacement. The residual stress of the UT specimen has a tensile residual stress up to about 100 ㎛ below the surface of the base material; however, when the depth exceeds 100 ㎛, the residual stress becomes a compressive residual stress. In addition, the inside of the spray coating film is compressive residual stress, which contributes to improving the fatigue strength characteristics. A hardened layer due to grit-blasting treatment is formed near the surface of the UT specimen, contributing to the improvement of the fatigue strength characteristics. Since the natural potential of Ti spray coating film is slightly higher than that of the base material, it exhibits excellent corrosion resistance; however, when physiological saline intrudes, a galvanic battery is formed and the base material corrodes preferentially.

• Korean Journal of Head & Neck Oncology
• /
• v.39 no.2
• /
• pp.65-69
• /
• 2023

We report a unique case of hemangioma of the nasal cavity in von Hippel-Lindau (VHL) syndrome. A 26-year-old female with VHL syndrome who had previously undergone surgery for pancreatic and adrenal mass presented with a 4-month history of left-sided nasal obstruction. The patient had an expansile mass lesion in the left nasal cavity and an imaging test demonstrated the mass in the left maxillary sinus extending to the nasal cavity. The tumor was removed with an endoscopic prelacrimal recess approach considering the possibility of not only a benign tumor such as hemangioma but also a malignant tumor of the maxillary sinus and histopathologic examination confirmed cavernous hemangioma. This case is the rarely reported manifestation of the paranasal sinus in VHL disease.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.337-350
• /
• 2020

The clinical manifestation of pericardial disease is similar to that of coronary artery disease and aortic disease. Therefore, a timely and accurate diagnosis is necessary. The pericardium is a 2-layered membrane that envelops the heart and great vessels, and there are numerous anatomic variations and pathologic conditions. Large or unusually located pericardial recesses can be easily mistaken for abnormal findings. Additionally, primary pericardial diseases resulting from infections, tumors, and injuries are possible; further, diseases can quickly spread along the pericardium. Echocardiography is generally the first imaging tool used to evaluate the pericardium. However, it has limited windows and poor resolution. Besides, the evaluation of postoperative echocardiography is sometimes limited. Currently, CT and MR imaging are useful for evaluating pericardial diseases. Detailed knowledge of the pericardium is important for interpreting the images and clinical results.

• Anatomy and Cell Biology
• /
• v.57 no.3
• /
• pp.463-467
• /
• 2024

Pneumatisation of the maxillary sinus (MS) is variable. The archived cone-beam computed tomography file of a 54-year-old female was retrospectively evaluated anatomically. Nasal or retrobullar recesses of the MSs (NRMS) were found. The MSs were bicameral. NRMSs extended from the postero-lateral chambers of the MSs into the lateral nasal walls. The right NRMS was reached superior to the middle turbinate and the ethmoidal bulla was applied on its anterior side. The left NRMS had two medial pouch-like ends, one beneath the ethmoidal bulla and the other on the anterior side of the basal lamella of the middle turbinate. Additional anatomical findings were the uncinate bulla, infraorbital recesses of the MS, maxillary recess of the sphenoidal sinus, and atypical posterior insertions of the superior nasal turbinates, maxillo-ethmoido-sphenoidal and ethmoido-sphenoidal. The NRMS is a novel finding and could lead to erroneous endoscopic corridors if not documented before the interventions.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.2
• /
• pp.57-68
• /
• 2012

This study is to suggest the improving methods for rural community centers by analysis of 30 community centers in Samnangjin-eup, Miryang city, Gyeongnam. To fulfill this purpose, the facilities, usable condition and management system were examined. The user needs and level of satisfaction were also investigated through the interviews with 858 citizens. The average size of the centers is $96m^2$, and 73% of them are one-story buildings. Women use the community center more frequently than men in ratio of 6:4. 43.4% of interviewees visit the center 1 or 2 times a month, but on the other hand 27.4% of them use the center almost every day. Recess is surely the main purpose, and health care and community meeting are next two reasons. 67.8% and 72.4% of them are not satisfied with the inside and outside of the community center respectively. The interview results demonstrate that the most important issue is the lack of facilities. To improve the community centers in Samnangjin-eup, first of all, various kinds of indoor and outdoor facilities must be equipped. Secondly, considering the center is the core of rural community life, the qualitative improvement in accommodation is also needed as well as facility diversification. The efficiency of space utilization is another issue. A small piece of land or abandoned space must be utilized. Moreover, it is very critical that the users are mostly seniors and elders, so improvements of facilities will be executed in terms of safety and convenience. Finally, administrative and financial support should be made for the people, so as to maintain the the rural community center on their own.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.354-362
• /
• 2017

We investigated the improvement in electrical characteristics of large AlGaN/GaN on Si Schottky barrier diode (SBD) induced by structural change to achieve a better trade-off between the forward and reverse performance to obtain high power conversion efficiency in PFC converter. Using an optimized dry etch condition for a large device, we fabricated three-types of SBD with 63 mm channel width: conventional, recessed, recessed dual-anode-metal SBD. The recessed dual-anode-metal SBD exhibited a very low turn-on voltage of 0.34 V, a high forward current of 1.63 A at 1.5 V, a leakage current of $114{\mu}A$ at -15 V, a breakdown voltage of 794 V.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.11-17
• /
• 2007

Effects of combustion chamber design on combustion stability characteristics of a full-scale gas generator were studied experimentally. Thirty seven double-swirl injectors with recess number of 1.5 were distributed in the injector head, which significantly influences combustion performance. The characteristics of combustion stability were inspected by the parametric variations such as changing length and diameter of the combustion chamber and installing a turbulence ring. The experimental result shows that as the effective length of the combustion chamber decreased, an instability frequency took place in a high-frequency region, and the amplitude of the dynamic pressure generally diminished and could be reduced to the unharmful level. However, the dynamic pressure fluctuation in the region of longitudinal resonant frequency could not be suppressed perfectly.

• Korean Journal of Veterinary Research
• /
• v.32 no.3
• /
• pp.421-427
• /
• 1992

The study was basically carried out to establish the appropriate condition for applying the Westergren method for erythrocyte sedimentation rate(W-ESR) in Throughbred racehorses at recess. To do this, we examined the correlationship among some factors including the kind of anticoagulants, optimal ambient temperature and reading time for W-ESR in healthy racehorses. The difference between the blood samples treated with only 3.8% solution of sodium citrate(SC) and both EDTA and SC as a coagulant, there was not recognized any significant difference(p<0.05) in the levels of W-ESR irrespective of the ambient temperature of $20^{\circ}C$ or $30^{\circ}C$. The best optimal ambient temperature for W-ESR in horses was proved at $30^{\circ}C$ resulting from the tendency of the most reduced dispersion in mean values analyaed from repeatly 4 times to the same blood samles compared with those of $10^{\circ}C$ and $20^{\circ}C$. The optimal reading time was determined as 60 minutes(Y=237.2~4.1X, $r^2=0.998$) and 70 minutes(Y=247.8~4.2X, $r^2=0.999$) under the same temperature of $30^{\circ}C$; the latter showed the better result on the basis of the correlation of packed cell volume(PCV) and ESR values. About 13 healthy racehorses, we compared the real values of W-ESR respectively obtained at 60 minutes and 70 minutes at $30^{\circ}C$ with the anticipated values of PCV by means of the analysis of linear regression equitation. As the result of this, the strong correlation between both of them was confirmed. For practical use of W-ESR in Thoroughbred racehorese, we can recommend the condition of 60 or 70 minutes for the optimal reading time as well as $30^{\circ}C$ for the best ambient temperature.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.24.1-24.1
• /
• 2011

CMP (Chemical Mechanical Planarization)는 고직접도의 다층구조의 소자를 형성하기 위한 표면연마 공정으로 사용되며, pattern 크기의 감소에 따른 공정 중요도는 증가하고 있다. 반도체 소자 제조 공정에서는 낮은 비용으로 초기재료를 만들 수 있고 우수한 성능의 전기 절연성질을 가지는 산화막을 만들 수 있는 단결정 실리콘 웨이퍼가 주 재료로 사용되고 있으며, 반도체 공정에서 실리콘 웨이퍼 표면의 거칠기는 후속공정에 매우 큰 영향을 미치므로 CMP 공정을 이용한 평탄화 공정이 필수적이다. 다결정 실리콘 박막은 현재 IC, RCAT (Recess Channel Array Transistor), 3차원 FinFET 제조 공정에서 사용되며 CMP공정을 이용한 표면 거칠기의 최소화에 대한 연구의 필요성이 요구되고 있다. 본 연구에서는 알칼리성 슬러리를 이용한 단결정 및 다결정 실리콘의 식각 및 연마거동에 대한 특성평가를 실시하였다. 화학적 기계적 연마공정에서 슬러리의 pH는 슬러리의 분산성, removal rate 등 결과에 큰 영향을 미치고 연마대상에 따라 pH의 최적조건이 달라지게 된다. 따라서 단결정 및 다결정 실리콘 연마공정의 최적 조건을 확립하기 위해 static etch rate, dynamic etch rate을 측정하였으며 연마공정상의 friction force 및 pad의 온도변화를 관찰한 후 removal rate을 계산하였다. 실험 결과, 단결정 실리콘은 다결정 실리콘보다 static/dynamic etch rate과 removal rate이 높은 것으로 나타났으며 슬러리의 pH에 따른 removal rate의 증가율은 다결정 실리콘이 더 높은 것으로 관찰되었다. 또한 다결정 실리콘 연마공정에서는 friction force 및 pad의 온도가 단결정 실리콘 연마공정에 비해 상대적으로 더 높은 것으로 나타났다. 결과적으로 단결정 실리콘의 연마 공정에서는 화학적 기계적인 거동이 복합적으로 작용하지만 다결정 실리콘의 경우 슬러리를 통한 화학적인 영향보다는 공정변수에 따른 기계적인 영향이 재료 연마율에 큰 영향을 미치는 것으로 확인되었으며, 이를 통한 최적화된 공정개발이 가능할 것으로 예상된다.