• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.348-348
• /
• 2012

CTF 메모리 소자는 높은 집적도와 낮은 구동전압과 CMOS 공정을 그대로 사용할 수 있고 비례 축소가 용이하다는 장점을 가지기 때문에 많은 연구가 진행되고 있다. CTF 메모리의 게이트 크기가 30 nm 이하로 작아짐에 따라 메모리 셀 간의 간섭이 매우 크게 증가하는 문제점이 있다. 이 문제점을 해결하기 위해 낸드 플래쉬 메모리 소자에서 셀 간 간섭 현상에 대한 많은 연구가 진행되고 있다. 본 연구에서는 $TaN-Al_2O_3-SiN-SiO_2-Si$ (TANOS) 플래쉬 메모리 소자에서 recess field의 모양에 따른 전기적 특성을 시뮬레이션 하였다. Recess field는 각 전하 트랩 층의 word 라인 방향에 존재하며 셀 간 간섭 효과를 줄이고 메모리 소자의 coupling ratio를 증가시키는 효과를 가지고 있다. TANOS 메모리 소자의 게이트 크기를 25 nm 에서 40 nm 로 변화하면서 round 타입의 recess field와 angular 타입의 recess field 에 대한 전기적 특성을 3차원 시뮬레이션 툴인 Sentaurus를 이용하여 시뮬레이션 하였다. Recess field를 가지지 않은 TANOS 메모리의 셀 간 간섭 효과는 게이트의 크기가 40 nm에서 25 nm 줄어들 때 많이 증가한다. 시뮬레이션된 결과에서 recess field의 모양에 상관없이 깊이가 늘어남에 따라 셀 간 간섭효과가 감소하였다. Recess field 의 깊이가 커짐에 따라 surrounding area가 늘어나 coupling ratio 가 증가하였다. Recess field 의 깊이가 증가함에 따라 프로그램 동작 시 트랩 층에 트랩 되는 전하의 수가 증가하고 recess field가 Si 기판의 표면에 가까이 위치할수록 coupling ratio, 드레인 전류 및 동작속도가 증가하였다. Recess field의 모양에 달리 하였을 때는 round 타입의 recess field를 가진 플래쉬 메모리 디바이스가 angular 타입의 recess field를 가진 소자와 비교하여 채널 표면의 잉여 전계가 감소하여 subthreshold leakage current 감소하였다. 본 연구의 시뮬레이션 결과는 수십 나노 스케일의 CTF 낸드 플래쉬 메모리 전기적 특성을 이해하는데 도움을 줄 것이다.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.26-33
• /
• 2003

Recess is a geometrical configuration shape that the exit surface of an inner injector is located at a certain length inward from that of an outer injector. It is known to have the characteristics that it can augment mixing efficiency and flame stabilization through internal mixing of propellant in it. So, various experiments, such as backlit stroboscopic photography, phase Doppler particle analyzer(PDPA) and mechanical patternator, were performed at several recess lengths to grasp its effect on the spray characteristics of spray angle, breakup length, atomization and' mixing. Recess length was normalized to dimensionless recess number and two principal mechanisms of impingement and swirl recovery were introduced to explain its influence on the spray characteristics. The effect of recess on SMD doesn't appear significantly near the recess number where mixing efficiency attains to the maximum, whereas mass distribution and mixing efficiency are changed considerably. Thus, it can be inferred that a certain optimum recess number exists, where mixing efficiency becomes the maximum.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.62-69
• /
• 2003

Swirl injectors have the advantage of stable combustion, high efficiency, and insensibility to variable O/F ratio. Recess length is the length from outer orifice tip to inner orifice tip. It is the very important variable of performance of swirl type injector Recess length have influence on collision, mixing, spray, and combustion of propellants. This study investigated on the engine performance with the change of recess length through CFD, cold flow test, and combustion test. In result, we could confirm the change of engine performance with the change of recess length. And we found that performance forecast process through CFD, cold flow test is the right process through combustion test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.3
• /
• pp.30-37
• /
• 2003

Spray angle of dual swirl injector is established according to the velocity ratio at orifice exit. Due to the internal mixing at recess and lack of correlation for the combined two fluid injection, prediction of spray angle is very difficult. This study deal with experimental work and numerical simulation on spray angle with different recess length. Among the multiphase flow models, the VOF model was selected to simulate the spray angle. Feasibility of numerical analysis are confirmed by comparing the results with the experimental data, and the effect of recess on spray angle are analyzed for single and combined spray case.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.131-139
• /
• 1996

The developent of ceramic combustor is being increased beca- use of the excellent physical properties of ceramic material, that is, high-resistant strength, high emissivity power and high corrosin-resistance. Ceramic combustor has been interested in the application of ultra-lean combustion for low NO$_{x}$ emission and gaseuos waste incineration with good combustion. This experimental study was conducted to investigate the combustion and emission characteristics of wall recess type ceramic combustor with equivalence ratio, mixture flow velocity and wall recess depth as parameters. The results in this study are as follows: 1. Wall recess played a important role to extend flame stability region. 2. The peak temperature of gas was peoportional to equivalence ratio, mixture flow velocity and wall recess depth. 3. The static pressure of mixing chamber and inlet temperature depended on the position of flame zone. 4. NO reduction was achieved by lean mixture without lower combustibility.y.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.131-136
• /
• 2003

Experimental study on combustion characteristics of double swirl coaxial injectors has been conducted for the assessment of critical design parameters of injectors. A subscale thrust chamber has been fabricated with a water-cooled copper nozzle, which allows a chamber to be reused without replacing parts. Two different designs of injectors have been tested for the understanding of the effects of recess length on combustion. Clearly, the recess length drastically affects the combustion efficiency and hydraulic characteristics of the injector. Internal mixing of propellants in the injector with the recess number of two increases a combustion efficiency and reveals sound combustion although a pressure drop required for the similar amount of mass flow rates increases compared with the injector of the recess number of one.

• Journal of ILASS-Korea
• /
• v.23 no.2
• /
• pp.49-57
• /
• 2018

Numerical study under single-injection on bi-swirl coaxial injectors with different recess lengths was performed using ANSYS Fluent. The bi-swirl coaxial injectors which consisted of inner closed-type and outer open-type swirl injectors, had three different recess lengths. By changing mass flow rates, numerical simulation was repeated using the Reynolds stress BSL turbulent model. The numerical results such as discharge coefficient and spray angle were compared with previous experimental data and were found to be approximately matched well with them, irrespective of recess length. Quantitative data which was hard to be measured from experiments, were successfully obtained through the present numerical study.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.13-18
• /
• 2010

This study aim to investigate the internal mixing flow characteristics by recess length of swirl coaxial injector for gas generator has propellant of Kerosene-LOx. Recess length is a very important element, have influence in spray stability and LOx post damage. The influence of recess length was analyzed by visualizing internal flow and measuring liquid film thickness and manifold pressures. Also, frequency characteristics were analyzed by liquid film thickness measurement with mixing time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.29-33
• /
• 2010

This study aim to investigate the internal flow characteristics by recess length of swirl coaxial injector for gas generator has propellant of Kerosene-LOx. Recess length is a very important element, have influence in spray stability and LOx post damage. The influence of recess length was analyzed by visualizing internal flow and measuring liquid film thickness and manifold pressures. Also, each spray characteristic by recess length was investigated in internal or external injector.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.125-125
• /
• 2011

Silicon-oxide-silicon nitride-oxide silicon (SONOS) 구조를 가진 플래쉬 메모리 소자는 기존의 floating gate (FG)를 이용한 플래쉬 메모리 소자에 비해 구동 전압이 낮고, 공정 과정이 간단할 뿐만 아니라 비례 축소가 용이하다는 장점 때문에 차세대 플래쉬 메모리 소자로 많은 연구가 진행되고 있다. SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 감소함에 따라 발생하는 인접한 셀 간의 간섭 현상에 대한 연구가 소자의 성능 향상에 필요하다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 작아짐에 따라 발생하는 인접한 셀 간의 간섭 현상에 대해 recess field 의 깊이에 따른 변화를 조사하였다. 게이트의 길이가 30nm 이하인 SONOS 구조를 가진 플래쉬 메모리 소자의 구조에서 recess field의 깊이의 변화에 따른 소자의 전기적 특성을 삼차원 시뮬레이션 툴인 sentaurus를 사용하여 계산하였다. 커플링 효과를 확인하기 위해 선택한 셀의 문턱전압이 주변 셀들의 프로그램 상태에 미치는 영향을 관찰하였다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 셀 사이에 recess field 를 삽입함으로 인접 셀 간 발생하는 간섭현상의 크기를 줄일 수 있음을 시뮬레이션 결과를 통하여 확인하였다. 시뮬레이션 결과는 recess field 깊이가 증가함에 따라 인접 셀 간 발생하는 간섭현상의 크기가 감소한 반면에 subthreshold leakage current가 같이 증가함을 보여주었다. SONOS 구조를 가진 플래쉬 메모리 소자의 성능향상을 위하여 recess field의 깊이를 최적화 할 필요가 있다.