• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.779-784
• /
• 2000

Comparing the adsorption properties and dissociation on a Pt(111) iththat ona Fe(111) surface, we have con-sidered seven coordination modes of the adsorbed binding site: $di-${\sigma}$${\Delta}$\mu\pi/\mu$, 1-fbld,2-fold, and 3-fbld sites. On the Pt(111) surface, t he adsorbed binding site of carbon dioxide was strongestat the1-fold site and weakest at the $\pi/\mu-site.$ The adsorbed binding site on the Fe(111) surface was strongest at the di-бsite and weakest at the 3-fold site. We have found that the binding energy at each site that excepted 3-fold on the Fe(111) surface was stronger than the binding energy on the Pt(111) surface and that chemisorbed $CO_2bends$ because of metal mixing with $2\piu${\rightarrow}$6a_1CO_2orbital.$, The dissociation reaction occured in two steps, with an intermediate com-plex composed of atomic oxygen and ${\pi}bonding$ CO forming. The OCO angles of reaction intermediate com-plex structure for the dissociation reaction $were115^{\circ}Con$ the Pt(111), and $117^{\circ}C$ on the Fe(111) surface. We have found that the $CO_2dissociation$ rea11) surface proceeds easily,with an activationenergy about 0.2 eV lower than that on the Pt(111) surface.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.13-13
• /
• 2018

우리나라의 하천 홍수량 자료는 대부분 댐 상류나 홍수위험 지역 등 유역 내 하천관리가 필요한 주요 지점에서만 측정되고 있다. 그러나 매년 관측되는 강우량 자료에 비해 유출량 자료는 유역의 크기가 작아질수록 매우 제한적이며, 신뢰성 있는 홍수량자료의 구축이 어려운 실정이다. 이에 본 연구에서는 유역특성인자(유역면적, 유역경사)를 매개변수로 활용하여 권역별 설계홍수량 자료에 대한 지역화 분석을 수행하였으며, 미계측 유역에서 홍수량 추정이 가능하도록 모형을 개발 하였다. 모형에서 발생하는 불확실성을 고려하기 위하여 Bayesian GLM(generalized linear method)기법을 활용하였으며, 최종적으로 모형의 매개변수와 산정되는 홍수량 결과에 대한 불확실성 구간을 정량적으로 제시하였다. 제안된 모형을 통해 일부 유역을 미계측 유역으로 가정하여 홍수량을 추정하였으며, 통계적 지표를 활용하여 기수립된 설계홍수량 자료와의 비교를 통해 모형의 적합성을 평가하였다. 본 연구를 통해 제안된 모형은 검증과정과 도출된 결과를 통해 유역특성에 따른 재현기간별 홍수량을 효과적으로 재현하는데 유리할 뿐만 아니라, Bayesian 기법을 도입하여 매개변수와 도출된 결과에 대한 불확실성의 정량적인 평가가 가능한 장점을 확인하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.155-156
• /
• 2010

포텐셜 자료의 해석을 위해서는 상하향 연속을 이용하는 경우가 많다. 빠른 계산과 다양한 적용성 때문에 FFT(Fast Fourier Transform)을 이용한 상하향 연속을 주로 사용하는데, FFT를 적용하기 위해서는 격자망 형태로 얻어진 자료가 필요하다. 현장 중자력 자료는 보통 산발적(scattered)으로 얻어지기 때문에 FFT를 수행하기 위하여 격자망 자료로 변환하는 격자화(gridding) 과정에서 계산적인 오차가 발생한다. 반면 등가샘(equivalent source) 방법은 주어진 자료에 맞는 가상의 샘(source)들의 조합을 생성하고, 구해진 샘들의 조합으로부터 임의의 영역에서 필드값을 구하므로 격자화 과정이 필요없다. 이 연구의 목적은 등가샘 방법의 필요성을 보이고 여러 가지 등가샘 알고리즘을 비교분석하고 현장 자료에 사용하기 적합한 등가샘 방법들을 보여주는데 있다. 그림 1에서 보듯이 FFT를 사용한 상향 연속은 FFT 이론상 전 영역에 대한 적분이 필요하나 현장에서는 일부분의 자료만을 획득할 수 있으므로 상향 연속에서 정확한 자력값으로 연속을 수행하는 것은 불가능하다. 그러나 주어진 값들로 등가샘을 구성하여 상향 연속을수행한 결과는 상대적으로 보다 정확한 해에 도달한다. 또한 등가샘 방법을 이용한 연속의 장점은 그림 2와 같이 얻어진 자료의 높이가 서로 다른 자료를 주어진 높이로 연속을수행할 수 있다는 점이다. 또한 한번 등가샘들을 구성하면 이를 이용하여 격자화, 필터링 등을 해석을 위한 기초 자료처리에 적용할 수 있다.

• Journal of Information Technology Applications and Management
• /
• v.29 no.1
• /
• pp.29-45
• /
• 2022

The Fourth Industrial Revolution era requires people to have the ability of integrated thinking, critics, sensitivity, and creativity in an integrated manner. Therefore, teaching methods are expected to become more suitable for the trend. In this belief, current teacher-leading education method should move to students' self motivating one and consist of programs in which students voluntarily involve. In this reason, this study suggests FPBL educational method model that is combines project-based learning with flipped learning by analysing preceding research and digital painting tool class was designed by applying it. As a result of applying the designed class model to the class, all of the class satisfaction, effectiveness, and interaction were evaluated positively. Problems such as limitations of project classes due to non-face-to-face classes, large amount of learning before class, and reduced concentration during class were found. Therefore, when the FPBL class model is conducted non-face-to-face, it will be necessary to further strengthen the role of the instructor, provide lecture videos summarizing the core contents, and improve concentration by providing active participation and fun using various digital tools. The result of the study looks significant by confirming the possibility of applying FPBL model not only in design education but also other educational settings.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1791-1801
• /
• 2023

The multi-physics coupled methodologies that have been widely used to analyze the complex process occurring in nuclear reactors have also been used to the R&D of numerical reactors. The advancement in the field of computer technology has helped in the development of these methodologies. Herein, we report the integration of ADPRES code and RELAP5 code into the SALOME-ICoCo framework to form a multi-physics coupling platform. The platform exploits the supervisor architecture, serial mode, mesh one-to-one correspondence and explicit coupling methods during analysis, and the uncertainty analysis tool URANIE was used. The correctness of the platform was verified through the NEACRP-L-335 benchmark. The results obtained were in accordance with the reference values. The platform could be used to accurately determine the power peak. In addition, design margins could be gained post uncertainty analysis. The initial power, inlet coolant temperature and the mass flow of assembly property significantly influence reactor safety during the rod ejections accident (REA).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.289-289
• /
• 2020

국내에서 강변여과수는 1990년대 말 이후 기술개발이 지속적으로 이루어져 왔으나, 아직까지도 방사형집수정의 적정 취수량 결정에 필요한 조사 및 설계 단계에서의 적정 조사물량에 대한 기준이 마련되어 있지 않은 실정이다. 방사형집수정 1기당 취수량 결정은 경험식에 의한 방법과 수치모델링에 의한 방법을 병행하여 이루어지고 있으나, 취수량 평가에 가장 중요한 수리전도도(k)의 오차로 인하여 설계단계에서 추정한 취수량과 시공 이후의 취수량에 차이가 존재하고 이로 인한 다양한 논쟁이 존재하고 있다. 본 연구에서는 경기도 안성천에서 시공된 방사형집수정의 사례를 토대로 조사단계에서의 적정 시추공의 갯수를 제시하고자 하였다. 수평정의 2m 간격으로 채취된 토양 및 총 8공의 시추공에서 채취된 토양 등 총 164개의 입도분석 자료를 이용하여 대표요소면적(Representative elementary area, REA)의 개념을 적용하여 적정 조사공의 갯수를 분석한 결과, 안성천 방사형집수정 규모의 경우에는 1기당 6~7개의 조사공이 필요함을 도출하였다. 본 연구에서는 경기도 안성천의 사례를 토대로 수행한 만큼 향후 낙동강 등 타 지역의 사례를 토대로 확인되고 검증된다면 강변여과수의 조사 기준으로서 활용될 수 있을 것이다.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.693-699
• /
• 2024

The main cause of scattering dust generated by transportation equipment such as automobiles was largely due to exhaust gas from internal combustion engines in the past, but it was generally recognized that non-exhaust causes such as abrasion of the tires or brake pads were low. Accordingly, scattering dust generated by exhaust gas has consistently existed in many studies, such as technological progress and related regulations, but research on non-exhaust is relatively insignificant, and the need for research on scattering dust generated by non-exhaust is emerging. In this study, a dust collector that can be easily mounted on a caliper to collect scattering dust generated by pad wear during the brake operation of an automobile was manufactured. In this study, we developed a dust collector that is easy to mount on calipers to collect scattering dust caused by pad wear during brake operation of automobiles. According to the installation of the manufactured dust collector, the performance of scattering dust by brake operation and the temperature change characteristics of calipers according to the structure of the dust collector were evaluated.

• Elastomers and Composites
• /
• v.59 no.1
• /
• pp.34-41
• /
• 2024

In this study, the effects of the type and content of silica on the mechanical and tear properties of chloroprene rubber (CR), which is mainly used as a jacket material for mining cables, were studied. The crosslinking density (ΔM) and reinforcing factor (α_f) defined using cure characteristics increased with increasing silica content, whereas the cure rate decreased. The hardness, tensile strength, and modulus of the CR compounds increased depending on the silica content and structural development. The reinforcing behavior of the silica-filled CR compounds according to the silica type and content showed the best fit with the Thomas equation of the predictive model. Tear strength was evaluated using two standard test methods, ASTM D470 and DIN VDE 0472-613, and the results were compared. The tear strength increased as the silica content increased, regardless of the test method, and the different tear strengths obtained by the two standard test methods showed a linear relationship with each other, indicating a high correlation.

• Journal of Radiation Industry
• /
• v.17 no.4
• /
• pp.533-542
• /
• 2023

We developed an emergency national manual for preservation of cultural heritage using irradiation disinfection technic under flood disaster. And we examined its practicality with a critical radiation dose on fungi that occur at water-logged event in order to prevent fungal damage that occurs during submersion. The X-ray irradiation for this experiment was conducted at the Production Technology Research Institute located in Yeongcheon, Gyeongsangbuk-do. A disinfection critical dose of 12 kGy was selected for two types of fungi known to spread rapidly and are resistant to radiation to submerged cultural properties, and this experiments were conducted by setting a target dose of 12kGy at 8.37mA at 5MeV. Under the above conditions, only continuity of irradiated samples were completely disinfected. This suggests that continuity of irradiation is important for fungal disinfection.

• Preventive Nutrition and Food Science
• /
• v.6 no.3
• /
• pp.192-196
• /
• 2001

Ethanol extracts from 36 vegetable samples were assayed for their growth-promoting effects on Bifidobacterium bifidum, B. longum, and Lactobacillus casei The growth-promoting effects varied according to bacterial strain and vegetable species. In modified Gy rgy broth, extracts of Lactuca sativa, Lycopersicon esculentum and L escutentum var. cerasiforme exhibited strong growth-promoting responses toward B. longum, and significant and strong growth- promoting response toward B. bifidum was observed in extracts of Actinidia arguta, Allium cepa, A. sativum, Brassica campestris subsp. napus vats. pekinensis, Capsicum frutescens, Daucus carota var. sativa, L sativa, 1. esculentum and L. esculentum var. cerasforme, Nelumbo nucifera, Cucurbita moschata, Lackca sativa var. capitata, and Rubus coreanus. For L casei, extracts of A. fshlosum, A. hberosum, Cichorium intbus, Cucurbita moschat\ulcorner Ipomoea batatas, 1. sativa var. capitata, L. esculentum, P. brachycarpa, Raphanus sativus, R. coreanus, and S. melongena strongly enhanced the growth of this bacteria. In modified Gy rgy broth, the promoting effect was most pronounced with B. bifidum and L. casei among lactic acid bacteria used. In MRS broth, A. arguta, A. cepa, A. sativum, B. campestris subsp. napus var. pekinensis, C. frutescens, and D. carota var. sativa L. satiw var. capitata, and R. coreanus strongly enhanced the growth of B. bifidum, Growth of B. longum was strongly affected by the addition of extracts from L. sativa var. capitata. For L casei, moderate growth-promoting responses were observed in 9 vegetable extracts. The promoting effect in MRS broth was most pronounced with B. bifidum among lactic acid bacteria used.