• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권1호
• /
• pp.51-54
• /
• 2013

Purpose: The purpose of this study is to evaluate the difference between open reduction and internal fixation (ORIF) and intermaxillary fixation (IMF) of mandibular fractures. Methods: A total of one hundred twenty-seven patients who were treated for mandibular fractures at Chosun University Dental Hospital, from January 2008 to December 2010, and analyzed their prognoses based on the use of IMF at the time of fracture reduction. The patients were divided into two groups; the manual reduction group without IMF and IMF group. Results: After reduction of the mandibular fracture, good results were obtained with majority patients. Nonetheless, seven patients (13.0%) in manual reduction method without arch bars or IMF, developed complications after surgery. Three patients underwent IMF due to occlusal instability after surgery, while one patient underwent re-operation. Thus, a significant difference was not observed between the IMF and manual reduction groups. Conclusion: Manual reduction and IMF at mandibular simple fracture could produce good results. In case of mandibular simple fracture, it was recommended with only manual reduction without IMF or IMF during a short period.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권8호
• /
• pp.360-367
• /
• 2002

In this paper, genetic algorithm based adaptive image enhancement filtering scheme is proposed and Implemented on FPGA board. Conventional filtering methods require a priori noise information for image enhancement. In general, if a priori information of noise is not available, heuristic intuition or time consuming recursive calculations are required for image enhancement. Contrary to the conventional filtering methods, the proposed filter system can find optimal combination of filters as well as their sequent order and parameter values adaptively to unknown noise types using structured genetic algorithms. The proposed image enhancement filter system is mainly composed of two blocks. The first block consists of genetic algorithm part and fitness evaluation part. And the second block consists of four types of filters. The first block (genetic algorithms and fitness evaluation blocks) is implemented on host computer using C code, and the second block is implemented on re-configurabe FPGA board. For gray scale control, smoothing and deblurring, four types of filters(median filter, histogram equalization filter, local enhancement filter, and 2D FIR filter) are implemented on FPGA. For evaluation, three types of noises are used and experimental results show that the Proposed scheme can generate optimal set of filters adaptively without a pioi noise information.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.33-51
• /
• 1997

On ATM-based wired/wireless integrated network, we apply the connection re-routing method[1] which reduced the inter-cluster handoff delay by reserving VPI/VCLs for possible inter-cluster handoff calls in advance. Additionally, we propose wired resource reservation methods, which are ausiliary method and split method, for handoff QoS guarantee of various expected services. The characteristics of these methods reserve wired connection resources based on the information on the possible inter-cluster handoff calls. With mathematical analysis, we also propose each algorithm and cost function for deciding an optimal amount in reserving resources. With numberical examples, we can see that the auxiliary method effectively reduces the cost in all cases(.alpha.>.betha., .alpha.=.betha., and .alpha.<.betha.). The split method has a little cost-reduction effects, when handoffs call does not have priority over new calls (that is, .alpha..leq..betha.) and the total capacity is relatively large. In other cases, the split method, however, has effective cost-reduction effects. The numerical resutls show that these reservation methods ca flexibly cope with the time-variant environment and meet the QoS requriements on the inter-cluster handoff calls.

• 대한치과기공학회지
• /
• 제36권2호
• /
• pp.111-118
• /
• 2014

Purpose: Production of dental prosthesis by a dental technician causes a loud noise. Thus, we investigated stress of dental technicians due to a noise using a structured questionnaire. Methods: A survey was conducted on working dental technicians across the country from July 2013 to November 2013; among 200 sets of survey distributed, 166 were completed and returned, and excluding the 11 that deemed unsuitable, 155 sets were used for statistics. The program SPSS 19.0 was used to analyze the correlation among the collected data. Results: The stress of noise was found to be 2.83/5 points (2.93/5 for physical stress, 2.72/5 for emotional stress). Recognition of noise was found to be 2.71/5 points (3.39/5 for recognition of noise, 2.64/5 for accidents caused by noise, 2.29/5 for experiencing disability due to noise). For general items, the highest stress were shown for the following catogories: by gender, females (p=.008); by position, chief engineer (p=.033); by monthly pay, 2.51M-3.0M KRW (p=.023); by interior comfort, 'very unpleasant' was the highest recognized (p=.014). For the effect of time exposed to noise, its stress (p=.000) and recognition (p=.000) rose with increase of time. Conclusion: Dental technicians performs tasks in work environments exposed to extreme noise. This research attempts to re-emphasize the necessity for improving the work environment for noise and provide measures of blocking noise and precaution.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.45-51
• /
• 2014

Generally, marine transmissions contain straight shafts and helical gears, meaning that enginerooms require more space. In order to guarantee a levelengine space for conical involute gears or beveloid gears, both of which are important machine parts, a conical gear was used to replace the traditional cylinder gear. Owing to weak points such as the point contact phenomenon of the teeth, a limitation of the width of each tooth in terms of the addendum, the variational modification coefficient,and the difficulty of processing, research about conical involute gears remains at a standstill. Along with the increasing number of applications of conical involute gears, research on conical gear design technology is necessary. In this paper, in an effort to enhance conical gear design technology, research on the 3D modeling and stress analyses of helical conical involute gears were done.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권sup1호
• /
• pp.46-51
• /
• 2008

Gastrointestinal stromal tumors (GIST) are the most common mesenchymal neoplasm of the gastrointestinal tract, and can be distinguished from the smooth muscle or neural tumors in approximately 95% of patients by expression of the KIT receptor tyrosine kinase (CD117). GISTs are known to have high malignant potential and none can be labeled definitely as benign. However, GISTs are unresponsive to standard sarcoma chemotherapy, and only complete surgical resection provides chance for cure. Although the imaging modality of choice is enhanced CT scan in patients with GIST, FDG PET can reflect the malignant potential of GIST. Clinical management of patients with GISTs has dramatically changed with the introduction of novel therapeutics, such as imatinib mesylate (Glivec). This has created a need to re-evaluate the existing criteria used to assess treatment response. FDG PET as functional imaging modality proved to be significantly more accurate than CT alone when assessing GIST response to imatinib. And, FDG PET and PET ICT have been found to be highly sensitive in detecting early response, and to be useful in predicting long-term response to imatinib in patients with recurrent or metastatic GISTs.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1189-1193
• /
• 2006

In order to develop radiopharmaceuticals for targeting a serotonin receptor such as $5-HT_{1A}$, histidine-$C_n$-arylpiperazines (AP) (C = alkyl, n = 2, 3, 4) were prepared in five steps with yields of 25%, 37% and 51%, respectively, and radiolabeled with the $[^{99m}Tc(CO)_3(H_2O)+3]^+$. The $^{99m}Tc(CO)_3$-Histidine-Cn-APs were prepared with a high yield (>99%) and characterized as a tridentate complex with a neutral charge to pass through the blood-brain barrier (BBB). The rhenium complexes with $Re(CO)_3$ were also synthesised and comparative experiments were achieved to evaluate the nature of the $^{99m}Tc$ complexes.

• 복식
• /
• 제51권6호
• /
• pp.117-128
• /
• 2001

The purposes of this study was to investigate discriminative factors of clothing buying intention on Internet shopping mall. The sample included 435 male(44.8%) and female(55.2% ) adults, and an instrument was developed based on previous studies. The statistical analysis used for this study were factor analysis, 1-test, and LISREL. The results of factor analysis showed that consumers evaluated apparel internet shopping attributes based on perceptional dimensions of internet shopping consisted of clothing quality and value. web service quality and value, and adoption of internet shopping. Each dimension has sub-factors as follows: (1) clothing quality was perceived as 'artistry' 'sociality' and 'practicality'. (2) web interface service quality was perceived as 'visuality', 'advantage', 'response', 'dependability' and 'buying-confidence'. (3) internet shopping adoption was perceived as 'usefulness' and 'convenience'. T-test revealed that consumer's buying intention, re-entry intention, and store attitude were differed concerning all sub-factors including 'usefulness' and 'convenience' in adoption of Internet shopping dimension. As a result of LISREL, clothing buying intention path model was set up as following path. (1) 'artistry', 'sociality' and 'practicality' of clothing quality affected clothing value perception positively. (2) 'visuality', 'advantage', 'response' and 'buying-confidence' of web service quality affected web service value perception positively. (3) clothing and web service value perception affected store attitude positively. (4) store attitude affected clothing buying intention positively. However, Adoption of Internet shopping dimension that was perceived as usefulness and convenience did not affect clothing buying intention path model. Therefore, consumers buying, intention model in internet circumstance could be used nearly the same as real market circumstance.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.44-51
• /
• 2001

One of the recent issues in design of the spot-welded structure such as the automobile body is to develop an economical prediction method of the fatigue design criterion without additional fatigue test. In this paper, as one of basic investigation for developing such methods, fracture mechanical approach was investigated. First, the Model I, Mode II and Mode III, stress intensity factors were analyzed. Second, strain energy density factor (S) synthetically including them was calculated. And finally, in order to decide the systematic fatigue design criterion by using this strain energy density factor, fatigue data of the ΔP-N(sub)f obtained on the various in-plane bending type spot-welded lap joints were systematically re-arranged in the ΔS-N(sub)f relation. And its utility and reliability were verified by the theory of Weibull probability distribution function. The reliability of the proposed fatigue life prediction value at 10(sup)7 cycles by the strain energy density factor was estimated by 85%. Therefore, it is possible to decide the fatigue design criterion of spot-welded lap joint instead of the ΔP-N(sub)f relation.

• 한국환경복원기술학회지
• /
• 제12권6호
• /
• pp.51-62
• /
• 2009

The purpose of this study is to analyze the profitability by selecting Pinus densiflora S. et Z. worthy of ornamental tree from among the cutting timber in the urban development project, and then presents the improvements. The study site is the whole area of Oedong-eup Gyeongju city Gyeongsangbuk-do and subject trees numbers are 2,180 trees. Analysis method is cost analysis because it is used generously pubic land development. In results, at first, in case of forest development currently cutting tree costs 7.3 million Won/ha. and no profit is occurred at all. Secondly, the forward direction order of tree treatments expenses are in sawdust production, selling lumber, selling ornamental tree, and selling ornamental tree, sawdust production, selling lumbered on the aspect of profits by the selling stumpage. Especially, selling trees as ornamental tree costs 127 million Won/ha. which shows the highest profits. Third, the management of ornamental tree pine tree after transplantation from development site costs 5 times less than purchasing the same quality trees. Hence, it is recommended to re-utilize the trees from the development sites to produce a high standard gardens and it also provides the basis for the low carbon green growth society.