• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.61-62
• /
• 2005

The present article deals with in situ post annealing of ZnO in sputtering system. The ZnO thin films were grown at low temperature of $100^{\circ}C$ and at working pressure of 15 mTorr with RF magnetron sputtering. Having been gown, ZnO thin films were annealed in situ at different temperatures, at annealing ambient pressure of 15 mTorr and in ambients of oxygen and argon respectively. Through analyses of XRDs, it is can be concluded that the crystallinity of annealed ZnO thin films becomes much better than that of as-grown ZnO thin film.

• Electrical & Electronic Materials
• /
• v.5 no.4
• /
• pp.439-445
• /
• 1992

최근 광자기 기록매체로 주목받고 있는 RE-TM계 비정질 박막을 T $b_{x}$ (F $e_{0.9}$ $Co_{0.1}$)$_{100-x}$ (x=14, 17, 20, 23, 27[at%])의 조성비를 갖는 모합금을 만든후 진공증착방법으로 합금박막을 제작하였다. 각시료의 조성에 따른 자기광학효과를 알아보기 위하여 80K부터 600K에서 포화자화( $M_{s}$ )와 보자력( $H_{c}$)에 대한 온도의존성과 자기이방성상수(Ku), Polar Kerr 이력곡선을 측정하였다. 또한 Curie 온도 근처에서 열처리 시간에 따른 자기 토크 곡선의 변화를 분석 함으로써 합금박막 표면의 산화정도를 정성적으로 평가할 수 있었다. 실험결과 T $b_{22.72}$(F $e_{68.78}$ $Co_{8.5}$)인 시료가 상온에서 8.4KOe의 보자력을 가졌으며 T $b_{x}$(x=23[at%])인 경우가 가장 큰 수직자기이방성을 나타냈다. Polar Kerr 이력곡선은 Tb함량 x=25~26[at%]에서 부호가 반전됨을 알 수 있었다.다.다.다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.29-32
• /
• 2012

변장비의 변화가 사각실린더에 작용하는 유체력에 미치는 영향을 알기 위해 EDISON_열유체를 사용하여 수치해석을 하였다. 낮은 레이놀즈수 영역($100{\leq}Re{\leq}200$)에서 사각실린더의 변장비(W/H)를 0.5, 0.75, 1, 2로 변화시키며 해석을 수행하였고, 레이놀즈수와 변장비에 따른 스트로할수(St), 항력계수($C_D$), 양력계수($C_L$)를 비교하였다. 본 논문에서는 레이놀즈수와 실린더의 변장비가 스트로할수, 항력계수, 양력계수에 미치는 영향을 알아보는 데 중점을 두었다. 해석결과 레이놀즈수가 증가하고 변장비가 감소할수록 스트로할수, 항력계수, 양력계수가 증가하는 것을 확인하였다. 본 논문을 통해서 레이놀즈수와 사각실린더의 변장비가 사각실린더에 작용하는 유체력에 영향을 미친다는 것을 알 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.121-124
• /
• 2012

비정상 유동 해석을 수행하는데 있어서 비정상 Navier-Stokes 방정식을 적용한 결과와 정상 N-S 지배 방정식을 적용한 결과의 차이를 비교하려한다. 적용하고자 하는 비정상 유동은 대칭형 에어포일 NACA0012 에어포일 주위 유동으로 정하였으며, 이 때 에어포일 시위(chord) 길이와 자유류(free stream) 속도 기준으로 Re=100,000에 해당한다. 계산결과 비정상 지배 방정식을 적용한 경우 비정상 유동박리(flow separation)를 모사 할 수 있었으며, 평균 양력계수($C_L$)와 항력계수($C_D$)는 실험치와 비교적 잘 일치하였다. 하지만 정상 N-S 방정식을 적용했을 경우 비정상 유동을 모사하기 어려웠으며 평균양력, 항력계수도 실험치와 차이를 보였다. 이러한 결과는 비정상 유동 해석시 시간에 따라 변화하는 유동의 특성을 고려해 비정상 N-S 지배 방정식을 적용해야한다는 사실을 보이고 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1227-1236
• /
• 2001

A systematic analysis is made of suboptimal control for drag reduction. The influence of the amplitude of actuation (A) and the time scale of actuation ($\Delta$t(sub)a(sup)+) is evaluated. Two wall sensing variables are employed (∂w/∂y│(sub)w and ∂p/∂z│(sub)w) with two wall actuations (${\Phi}$$_2$and ${\Phi}$$_3$). To test the suboptimal control, direct numerical simulations of turbulent channel flow at Re(sub)$\tau$=100 are performed in a spectral domain. It is found that the effect of A and $\Delta$t(sub)a(sup)+∼1. The near-wall behaviors of flow structure are analyzed to characterize the drag reduction. The size effect of the sensor/actuator is examined.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.93-100
• /
• 2006

Post industrial technologies have improved human standard of living, however, a host of negative environmental consequences from the unlimited industrial appetite have posed serious global challenges. Remanufacturing is an industrial manufacturing process that is to restore old products to perform like a new and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. By extending product lift cycle, remanufacturing gives us enormous opportunities for sustainable development of our society. This paper introduces needs and current state of the art in the field of remanufacturing, also analyzes old products in terms of product variety and wear conditions with an example of automobile alternators. Then, a general and a product-specified remanufacturing process will be determined with them. Finally, this paper shows systemized guidelines for remanufacturing process of the specified parts. The results could be also used as a basic information for further remanufacturing applications.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.157-160
• /
• 2003

To estimate genetic relationships within the genus Rhizopus, genetic variations in 20 strains were investigated by DGGE and PCR-RFLP of rDNA ITS region (ITSI, ITS2,5.8S). The size of the amplified products showed the interspecific polymorphisms, 650 bp,700 bp, and 900 bp. The DGGE approach allowed the separation of PCR amplicons of the same length according to their sequence variations. When the rDNA ITS region was digested with six restriction enzymes, 20 strains were classified into five RFLP haplotypes. The range of similarity between the 20 strains by PCR-RFLP was 42.3-100%. Based on the results of DGGE aud PCR-RFLP, the 20 strains were divided into four groups, R. oryzae, R. stolonifer, R. microsporus and R. homothallicus. Further study of R. homothallicus is required.

• Journal of Information Technology Applications and Management
• /
• v.10 no.1
• /
• pp.35-46
• /
• 2003

This study focuses on the effect of Social Scaffolding of virtual community on its growth and thrift. The research model proposed in this study is that communities, which have goof social scaffolding, tend to grow and thrive. Social Scaffolding refers to those aspects of a site Purpose, Places, Profiles, leaders, Roles, Rules, Cyclic Events, integrating with the real world, and Subgroups. The data were collected from 100 virtual communities in Daum Communications and analyzed in this study. Multiple regression is used to analyze the relationship of variables. The result is following ; purpose, loaders, rules, integrating with the real world support the effects of social scaffolding of virtual community on its growth and thrift, but profiles, roles, cyclic events do not. The result of this study implies the importance of social scaffolding of virtual community for re-searches, and developers.

• Proceedings of the SOHE Conference
• /
• 2003.10a
• /
• pp.93-93
• /
• 2003

저소득층 노인 대상의 급식서비스 영양효과를 분석하기 위한 기초연구로써 광주광역시 북구 지역 저소득층 노인 100명을 대상으로 2002년 11월 20일~12월 15일까지 실태조사를 통해 건강ㆍ영양문제를 도출하고 급식서비스 제공에 따른 영양효과를 분석한 결과는 다음과 같다. 수혜를 받은 대상자의 평균 연령은 72.44세, 신장은 158.50cm, 체중은 52.29kg 이었고 이로부터 구한 평균 체질량지수는 20.86kg/$m^2$이었다. 평균 영양소 섭취량은 열량 1,389,67㎉, 단백질 53.50g, 지질 26.20g, 탄수화물 234.41g, 섬유질 5.56g, 칼슘 481.15mg, 인 882,76mg, 철분 8.59mg, 나트륨 4,208.98mg, 칼륨 2,069.77mg, Retinol 408,69RE, Thiamin 0.84mg, Riboflavin 0,73mg, 나이아신 11.04NE, Ascorbic acid 80.63mg, 콜레스테롤 157.63mg 이었고, 연령이 증가할수록 영양제 섭취 비율이 증가하였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.2
• /
• pp.19-27
• /
• 2001

In the present study, the effects of film Reynolds number (60∼200) and volumetric content of non-absorbable gases (0∼10%) in water vapor on the absorption process of aqueous LiBr solution were investigated experimentally. The formation of solution film on the horizontal tubes of six rows was observed to be complete for Re>100. Transition film Reynolds number was found to exist above which the Nusselt number and Schmidt number diminishes with solution flow rate. As the concentration of non-absorbable gases increased, mass transfer rate decreased more seriously than heat transfer rate did. the degradation effects of non-absorbable gases seemed to be significant especially when small amount of non-absorbable gases was introduced to the pure water vapor.