• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.373-373
• /
• 2014

Resistive-change random access memory (ReRAM) device is one of the promising candidates owing to its simple structure, high scalability potential and low power operation. Many resistive switching devices using transition metal oxides materials such as NiO, Al2O3, ZnO, HfO2, $TiO_2$, have attracting increased attention in recent years as the next-generation nonvolatile memory. Among various transition metal oxides materials, HfO2 has been adopted as the gate dielectric in advanced Si devices. For this reason, it is advantageous to develop an HfO2-based ReRAM devices to leverage its compatibility with Si. However, the annealing temperature of these high-k thin films for a suitable resistive memory switching is high, so there are several reports for low temperature process including microwave irradiation. In this paper, we demonstrate the bipolar resistive switching characteristics in the microwave irradiation annealing processed Ag/HfO2/Pt ReRAM device. Compared to the as-deposited Ag/HfO2/Pt device, highly improved uniformity of resistance values and operating voltage were obtained from the micro wave annealing processed HfO2 ReRAM device. In addition, a stable DC endurance (>100 cycles) and a high data retention (>104 sec) were achieved.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.27-33
• /
• 2003

Pulsed magnetron sputtering of graphite target was employed for deposition of diamond-like carbon (DLC) films. Time-resolved probe measurements of magnetron discharge plasma have been performed. It was shown that the pulsed magnetron discharge plasma density ($∼10^{17}$ $m^{-3}$ ) is close to that of vacuum arc cathode sputtering of graphite. Raman spectroscopy was sed to examine DLC films produced at low ( $U_{sub}$ / < 1 kV) pulsed bias voltages applied to the substrate. It has been shown that maximum content of diamond-like carbon in the coating (50-60%) is achieved at energy per deposited carbon atom of $E_{c}$ =100 eV. In spite of rather high percentage of $sp^3$-bonded carbon atoms and good scratch-resistance, the films showed poor adhesion because of absence of ion mixing between the film and the substrates. Electric breakdowns occurring during the deposition of the insulating DLC film also thought to decrease its adhesion.

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1523-1532
• /
• 2007

In order to determine if the mRNA and protein expression levels of 3T3-L1 adipocytes are influenced by oriental medicines, adipocytes were treated with $100\;{\mu}g/ml$ of G-Re and aqueous extract of a Coix lachrymajobi var. mayuen (AEC) every other day for 12 days, respectively. The tumor necrosis factor alpha ($TNF-{\alpha}$). mRNA and protein expressions were suppressed markedly in treated mature adipocytes. Those of lipoprotein lipase (LPL) levels were found to increase gradually in preadipocytes differentiating into mature adipocytes. Those were higher than that of the untreated mature adipocytes. The treated adipocytes showed reduction of leptin expression levels, while in untreated mature adipocytes cell, those of levels were significantly higher after the conversion of preadipocytes into mature adipocytes. The resistin levels in the treated adipocytes were significantly decreased comparing to that of the untreated mature adipocytes. In conclusion, the expression levels of LPL, $TNF-{\alpha}$, leptin and resistin mRNA and proteins are shown to be regulated by G-Re and AEC, making them potential candidates for controlling fat mass related obesity.

• Korean Journal of Plant Resources
• /
• v.34 no.2
• /
• pp.156-165
• /
• 2021

The in vitro regeneration was established, and the genetic stability among the mother plants (control) and the micropropagated green plants was evaluated using ISSR markers in Imperata cylindrica 'Rubra', Poaceae which containing important bioenergy plants. Green shoots were multiply induced from growing point culture via callus on MS medium supplemented with 0.01 mg/L NAA and 2 mg/L BA, and the shoots were proliferated on the MS medium with rooting. Rooted plantlets were transplanted to the pot with 100% survival rate. Using ISSR markers, somaclonal variation was analyzed in eight mother plants (control), ten green-regenerant cultivated at culture room (ReR) and ten green-regenerant cultivated at field condition (ReF). All ISSRs produced a total of 97 bands, and the scorable bands varied from one to seven with an average of 4.4 bands per primer. The polymorphism rate of ReRs and ReFs was 4.1% and 3.1% respectively, showing higher rate than that of control (0%). The genetic similarity matrix (GSM) among all accessions ranged from 0.919 to 1.0 with a mean of 0.972. According to the clustering analysis, ReFs and mother plants were divided into two independent groups. The results indicate that no clear genetic diversity was detected among regenerated plants, and ISSR markers were useful tool for identification of somaclonal variation of regenerants.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.3
• /
• pp.249-277
• /
• 2023

The purpose of this study is to explore the potential contribution of citation metrics to improving the search performance of citation index databases. To this end, the study generated ten queries in the field of library and information science and conducted experiments based on the relevance assessment using 3,467 documents retrieved from the Web of Science and 60,734 documents published in 85 SSCI journals in the field of library and information science from 2000 to 2021. The experiments included re-ranking of the top 100 search results using citation metrics and search methods, query expansion experiments using vector space model retrieval systems, and the construction of a citation-based re-ranking system. The results are as follows: 1) Re-ranking using citation metrics differed from Web of Science's performance, acting as independent metrics. 2) Combining query term frequencies and citation counts positively affected performance. 3) Query expansion generally improved performance compared to the vector space model baseline. 4) User-based query expansion outperformed system-based. 5) Combining citation counts with suitability documents affected ranking within top suitability documents.

• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.349-357
• /
• 1998

This study was to investigate whether the viability of Hanwoo IVM/IVF/IVC blastocysts was maintained after vitrification and thawing. In vitro produced Hanwoo blastocysts were vitrified by two-step method: equilibrated in EG20 for 3 min, and then exposed in EFS40 ［40% ethylene glycol (EG), 18% ficoll and 10.26% sucrose in mDPBS containing 10% FBS ］and vitrified in L$N_2$for 30 - 45 sec. After thawing, in vitro survival was assessed as the re-expanded and hatched rates at 24 hand 48 h, respectively. The results obtained in these experiments were summarized as follows: From the 12 replicates, 52.5% of Hanwoo blastocysts were produced in vitro at day 7 after IVF. When the effects of freezing solution to the embryo survival were examined, there is no significant toxicity in exposure (100.0, 73.8%) compared to that af control group (100.0, 87.0%). However, when embryos were vitrified, high survival (86.2, 55.4%) was obtained although it was significantly lower than those of exposure and control group (p＜0.05). When the in vitro survival of vitrified embryos according to developmental stage and culture day were examined, it showed that more advanced embryo stage exhibited a significantly higher survival rate irrespective of culture day (p＜0.05). Also, even in the same development stage, the in vitro survival of day 7 embryos (re-expanded: 75.0~87.5%, hatched: 21.4~66.7%) was higher than those of day 8 embryos(re-expanded: 58.6~78.3%, hatched: 10.3~52.2%). Therefore, these results suggested that in vitro produced Hanwoo blastocysts can be successfully cryopreserved by simple two-step vitrification method using EFS40 freezing solution, particularly at the expanded and early hatching blastocyst stage regardless of embryo culture duration (day 7 or day 8 after IVF).

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.305-309
• /
• 1994

Precooked powder of redbean porridge (RP) was prepared by the series of process extrusion, drying, milling and blending with a mixture of whole redbean flour and corn starch and others. The optimum process and quality of products for RP were investigated. After extrusion under the moisture content 24 to 26%, twin screw speed 350 rpm, extrusion temperature 150 to $155^{\circ}C$ and feed rate 60 kg/hr, the product had a higher quality with its natural redbean flavor/color. During the extrusion process, extrusion temperature and specific mechanical energy increased from 150 to $198^{\circ}C$ and from 134 to 144 kwh/ton respectively, as the amount of addition water decreased from 6 to 2 kg/hr. By the hot air drying of redbean extrudate (RE). it could be dried below to 4% moisture content, of which level considered as an optimal moisture content for anti-caking of the powdered product, at $80^{\circ}C$ for 4hrs and at $100^{\circ}C$ for 1.5 hrs respectively. In the sieve analysis of extrudate powder, when the product milled through a mesh size of 0.5 mm or 1.0 mm, about 80% or 65% of the feed was passed a 65 mesh screen respectively. Moisture absorption of final blended products was formed a cake under 100% of relative humidity after 13 hrs of storage. As the amount of RE powder reduced, the flavor score of products decreased by sensory evaluation of products prepared by the different ratio of RE powder, corn starch and sugar.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.3
• /
• pp.405-410
• /
• 2010

The effect of microwave treatment on Korean ginseng was studied by measuring the changes in moisture, crude lipid, crude ash, crude protein, total dietary fiber and saponin contents, as well as changes in density, color and microstructure. Korean ginseng was treated with 100 or 200 watts of microwaves for 1 or 3 hrs, respectively, followed by drying using an oven at $60^{\circ}C$ for 96 hrs. The moisture contents decreased to 13.12~10.77% from an initial 76.26%. The amounts of lipid and ash were reduced in proportion to the time of microwave treatment and level of microwave power. The amount of protein in ginseng after microwave treatment did not significantly change. The amount of total dietary fiber increased after microwave treatment and the color of dried ginseng became dark. The amounts of ginsenoside-$Rb_1$, $Rb_2+Rb_3$, Rc, Rd, Re, Rf, $Rg_1$, $Rg_2+Rh_1$ and $Rg_3$ were reduced after treatment with 100 watts of microwave radiation for 1 and 3. The amounts of ginsenoside-$Rb_1$, Rd, Re, Rf, $Rg_1$, $Rg_2+Rh_1$ and $Rg_3$ after treatment with 200 watts of microwave radiation for 1 and 3 hr also reduced. On the other hand, the amounts of ginsenoside-$Rb_2+Rb_3$ and Rc after treatment of ginseng with 200 watts of microwave radiation for 1 and 3 hrs were increased.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.211-217
• /
• 2008

To find up using of more efficient white ginseng, white ginseng was dried on various temperature (70, 80, 90,100, 110, 120, 130 and $140^{\circ}C$) with far-infrared drier and analyzed the composition of ginsenoside, carbohydrate, organic acid content and color. The type of ginseng shape was sliced and dried main and fine root, separately. As heating temperature increased, total ginsenoside content increased on main root, its content was the highest at $130^{\circ}C$, while decreased on fine root. Soluble carbohydrate content was the highest at $70^{\circ}C$ both on main and fine root. Increase of Re, Rc and Rb2 content was increased more high at $130^{\circ}C$, especially. But on fine root, content of Rg1, Rg3, Rf and Rb3 was increased and Re, Rc,Rb1 and Rb2 were decreased by the increased of temperature. As heating temperature increased, lightness of both main and fine root were decreased. Redness and yellowness of both main and fine root was increased to $120^{\circ}C$ and $100^{\circ}C$, respectively and decreased over this temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1680-1683
• /
• 2003

To describe the performance of an antenna, some parameters are necessary. Some of the parameters are interrelate and not all of them must be specified for complete description of antenna performance. The parameters in characteristics of printed antenna for this analysis are radiation pattern, input impedance, VSWR, S parameter and electromagnetic field. In this paper we will consider two shaped of slot antennas one is triangular slot antenna and other is L - shape slot antenna for compare the radiation pattern, return loss, and VSWR. Two slot antennas are designed to have a resonant frequency at 10 GHz. The microstrip line is designed to be 50 ohms in order to match the measurement system, it has the substrate of the thickness = 1.52 mm and dielectric constant (${\varepsilon}_r$) 2.17. The problem space in the FDTD analysis are $60{\times}123{\times}100$ cells for L-shape slot antenna and $50{\times}171{\times}120$ cells for triangular slot antenna with the cell dimensions ${\Delta}x=0.152\;mm.$, ${\Delta}y={\Delta}z=0.15\;mm.$