• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.136-140
• /
• 2001

The 3rd generation mobile telecommunication fields are being standardized and developed in two parts, 3GPP and 3GPP2. These two parts have established each Network Architecture Models to achieve the goals basically required in the 3rd generation and to make it progress to IP network in the future. To achieve these goals many system architectures are proposed. Not only functional aspects but also performance aspects are considered as major factors. This paper proposes a new method of performance evaluation modeling and simulation that improved the existing way. The method proposed in this paper is Aspect oriented logical performance analysis Modeling and Simulation method. This proposed method is expected to improve efficiency of performance analysis modeling and simulation on the 3rd generation mobile telecommunication system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.731-743
• /
• 2018

In this paper, a study result to decide the accuracy specifications of inertial sensors satisfying the performance requirements of SINS(ship's inertial navigation system) is proposed. To do this, the performance specifications of overseas SINS is surveyed and the detailed error analysis of SINS at stationary condition is performed. Also, a new performance index to indicate the performance of SINS is derived. Modelling and simulation results show that the accuracy specifications of inertial sensors to meet the performance requirements of SIGMA40XP, a typical overseas SINS, can be determined through the newly derived performance index in this paper.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.391-394
• /
• 2011

3rd party content service is a consumer-based wide selection of contents in which IPTV provider believes will enhance the service considerably extending the variety of contents to finally provide a personalized service. Therefore, the combination of 3rd party content services and the IPTV infrastructure creates a good revenue opportunity but they need to be created. IPTV offers to create personalized channels to distribute 3rd party content service. However, the cost of $3^{rd}$ party content delivery is high when the service is provided from a faraway server. IPTV provider requires an effective strategy of replica placement to minimize the cost without a tradeoff on the performance. We propose a cluster-based strategy of replica placement to find the right balance between cost and performance. The results demonstrate the achievement of an outstanding delivery time and low cost.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.623-630
• /
• 2013

This study was to evaluate hydrodynamic performance evaluation between an abroad product, a developed inflatable kayak and new developed kayaks. In order to test, inclining and turning trial test were carried out in the Ocean engineering Basin. Also, resistance test was carried out using a reduced scale model in the circulating water channel. In conclusion, stability of KONA was evaluated was the most greatest, the coefficient of resistance and center of gravity from RD-FK-12 were considerable, and turning performance of RD-FK-11 was greater than this of KONA and RD-FK-12.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.1
• /
• pp.57-63
• /
• 2017

This study aimed at proposing a RD&D good practice policy guidelines for energy technology innovation in electric power industry, we identified the success factors on energy RD&D through representative case analysis such as energy RD&D demonstration project and strategy plan, technology road map, etc. Based on a successful case study, we have identified the key elements needed to suggest when setting a RD&D technology innovation policy framework for technological competitiveness in the power industry sector. We have presented guidelines for energy technology innovation direction from the full cycle perspective of RD&D. The energy RD&D innovation system that we have established is meaningful in that the implications are derived and reflected through the case analysis of developed countries. The results of this study are as follows; Enhancement of R&D investment performance, commercialization of research achievements, promotion of export industrialization of electric power industry, establishment of RD&D governance system of power energy, etc.

• Transactions of Materials Processing
• /
• v.18 no.1
• /
• pp.73-79
• /
• 2009

In order to investigate the formability of friction stir welded(FSW) tailor welded blanks(TWB) with respect to the base material's directional combination, aluminum alloy AA6111-T4 sheets were welded with three different conjoining types: RD-RD, TD-RD and TD-TD. Here, RD and TD represent rolling and transverse directions, respectively. For experimental formability study, three tests with gradual complexity were performed: the simple tension test with various weld line directions for uni-axial elongation, the hemisphere dome stretching test for biaxial stretching and the cylindrical cup deep drawing test. As a result, all three forming tests showed that RD-RD type samples exhibited the best formability, while TD-TD type sheets showed the least formability performance.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.2
• /
• pp.197-208
• /
• 2003

Objective：In this study, we hypothesized that deficit in processing rapid linguistic stimuli is at the heart of Reading Disability(RD) and deficit in response inhibition is at the heart of Attention Deficit/Hyperactivity(ADHD). We conducted experiments to identify the core cognitive characteristics of children either with RD or with ADHD or with both, using attentional tasks and phoneme differential tests. Method：In the study 1, 28 children with ADHD, 16 children with RD+ADHD were individually administered visual/auditory performance tests. Then, the differences of performance on attentional tasks between two groups were compared while IQs of two groups were controlled. In the study 2, 13 children with RD+ADHD/RD, 13 children with ADHD, and 13 normal children were administered computerized phoneme differential tests. Result：Visual attentional tasks did not distinguish an ADHD group from a RD+ADHD group. With auditory attentional tasks, however, the comorbid group showed significantly more difficulties, causing a large variance in reaction time. RD, RD+ADHD, and ADHD groups showed more errors in phoneme differential tests than a normal control group, and each group showed distinctive performance patterns. Discussion：An ADHD group had difficulty in response inhibition and sustained attention, and children who also had RD along with ADHD magnified the auditory attentional difficulties. Even though children with RD had more trouble with responding correctly to target stimuli, their responses were not significantly different from those of children with ADHD.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1215-1220
• /
• 2004

Reactive distillation (RD) is a combination process where both separation and reaction are considered simultaneously in a single vessel. This kind of combination to enhance the overall performance is not a new attempt in the chemical engineering areas. The recovery of ammonia in the classic Solvay process for soda ash of the 1860s may be cited as probably the first commercial application of RD. The RD system has been used for a long time as a useful process and recently the importance of the RD is enlarged more and more. In addition to that, the application fields of RD are diversely diverged. To make the most of the characteristic of RD system, we must decide the best operating condition under which the process shows the most effective productivity and should decide the best control algorithm which satisfies an optimal operating condition. Phosgene which is a highly reactive chemical is used for the production of isocyanates and polycarbonates. Because it has high reactivity and toxicity, its utilization is increasingly burdened by growing safety measures to be adopted during its production. Dimethyl Carbonate (DMC) was proposed as a substitute of phosgene because it is non-toxic and environmentally benign chemical. In this study, RD is used for DMC production process and the transesterification is performed inside of column to produce DMC. In transesterification, the methanol and ethylene carbonate (EC) are used as the reactants. This process use homogeneous catalyst and the azeotrope exists between the reactant and product. Owing to azeotrope, we should use two distillation columns. For this DMC production process, we can suggest two configurations. One is EC excess process and the other is methanol excess process. From the comparison of steady state simulation results where the Naphtali-Sandholm algorithm is used, it showed the better performance to use the methanol excess process configuration than EC excess process. Then, the dynamic simulation was performed to be based on the steady state simulation results and the optimal control system was designed. In addition to that, the optimal operating condition was suggested from previous results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.181-187
• /
• 2013

Performance of DI diesel engine with high fuel injection method is directly related to its emission characteristics and fuel consumption. In this study, numerical model of 3rd generation piezo-driven injector was designed to analyze the hydraulic performance. Also the injection response characteristics was investigated by using the AMESim simulation code. From this study, it was shown that 3rd generation piezo-driven injector had a faster response and had better control capability due to its hydraulic bypass-circuit that has potential to higher hydraulic characteristics and improved accuracy of injected fuel quantity.

• Journal of Power Electronics
• /
• v.7 no.4
• /
• pp.310-317
• /
• 2007

In this paper, an analysis and hysteretic controller design of a $3^{rd}$ order buck converter is presented. The proposed hysteretic controller consists of an inner current-loop, just like the conventional cascade control scheme, and an outer voltage-loop for load voltage regulation. Although it is possible to include an inner current loop from different branches of the converter, from the feasibility and operational point of view, the load side capacitor current would be the better choice. The addition of an inner current-loop improves the dynamic performance of the converter while preserving the robustness of the hysteretic control. The controller formulation and closed-loop converter performance analysis are validated through computer simulations. Few experimental results of the proposed converter are given and compared with the buck converter.