• Journal of Soil and Groundwater Environment
• /
• v.14 no.3
• /
• pp.40-46
• /
• 2009

The applicability of a well-type autotrophic sulfur-oxidizing reactive barrier (L $\times$ W $\times$ D = $3m\;{\times}\;4\;m\;{\times}\;2\;m$) as a long-term treatment option for nitrate removal in groundwater was evaluated. Pilot-scale (L $\times$ W $\times$ D = $8m\;{\times}\;4\;m\;{\times}\;2\;m$) flow-tank experiments were conducted to examine remedial efficacy of the well-type reactive barrier. A total of 80 kg sulfur granules as an electron donor and Thiobacillus denitrificans as an active bacterial species were prepared. Thiobacillus denitrificans was successfully colonized on the surface of the sulfur granules and the microflora transformed nitrate with removal efficiency of ~12% (0.07 mM) for 11 days, ~24% (1.3 mM) for 18 days, ~45% (2.4 mM) for 32 days, and ~52% (2.8 mM) for 60 days. Sulfur granules attached to Thiobacillus denitrificans were used to construct the well-type reactive barrier comprising three discrete barriers installed at 1-m interval downstream. Average initial nitrate concentrations were 181 mg/L for the first 28 days and 281 mg/L for the next 14 days. For the 181 mg/L (2.9 mM) plume, nitrate concentrations decreased by ~2% (0.06 mM), ~9% (0.27 mM), and ~15% (0.44 mM) after $1^{st}$, $2^{nd}$, and $3^{rd}$ barriers, respectively. For the 281 mg/L (4.5 mM) plume, nitrate concentrations decreased by ~1% (0.02 mM), ~6% (0.27 mM), and ~8% (0.37 mM) after $1^{st}$, $2^{nd}$, and $3^{rd}$ barriers, respectively. Nitrate plume was flowed through the flow-tank for 49 days by supplying $1.24\;m^3/d$ of nitrate solution. During nitrate treatment, flow velocity (0.44 m/d), pH (6.7 to 8.3), and DO (0.9~2.8 mg/L) showed little variations. Incomplete destruction of nitrate plume was attributed to the lack of retention time, rarely transverse dispersion, and inhibiting the activity of denitrification enzymes caused by relatively high DO concentrations. For field applications, it should be considered increments of retention time, modification of well placements, and intrinsic DO concentration.

• Journal of Nutrition and Health
• /
• v.32 no.7
• /
• pp.802-811
• /
• 1999

The purposes of this study were to 1) examine the dietary patterns of fatty acids and the fatty acid composition in serum, 2) determine selenium (Se) concentrations, and 3) investigate how serum fatty acid compositon affects serum levels of Se in Korean elementary school children. The subjects consisted of 168 school children(82 boys & 86 girls) belonging to 1st through 6th grades, and their dietary assessment was evaluated. The serum fatty acid composition was analyzed by GLC, and the ICP/MS method was employed to measure serum Se concentration. Total average intake of PUFA, MUFA and SFA were 10.5g, 12.7g, 11.2g respectively. Total average dietary P/M/S ratio was 1.10/1.18/1.0. The average intake of $\omega$3 fatty acids and $\omega$6 fatty acids were 1.33g, 9.19g, respectively. The $\omega$6/$\omega$3ratio was 14.2 which is higher than the recommended range. In serum fatty acid composition, PUFA, MUFA, SFA were 40.6%, 28.1% and 31.6% respectively. The average $\omega$3 fatty acid composition was 3.80%, and the mean value of $\omega$6 series was 36.8%. The M/S ratio of girls was significantly higher than boy's in fatty acids intake and in serum composition. Mean Se concentration of total subjects was 416.7ug/l and it was significantly higher in the lower grades(1st-3rd)than in the upper grades(4th~6th, p<0.05). Although the mean serum Se concentration was negatively correlated with PUFA composition in total boys and girls, it was not significant. Serum Se concentration was negatively correlated with P/S ratio and C24:1 concentration(p<0.05). In addition, serum composition of $\omega$6 PUFA and C24:1 showed negative correlations with serum Se in only lower grades girl(1st~3rd), and further studies are needed to clarify in these phenomena. In conclusion, the mean serum Se concentration was significantly lower in upper grades (4th~6th)than in lower grades(1st~3rd) of elementary school children and was negatively correlated with P/S ratio of serum fatty acids. More detailed studies on relationship between Se and fatty acids are required.

• Smart Structures and Systems
• /
• v.31 no.1
• /
• pp.1-11
• /
• 2023

Assessment of the compressive strength of concrete plays a major role during formwork removal and in the prestressing process. In concrete, temperature changes occur due to hydration which is an influencing factor that decides the compressive strength of concrete. Many methods are available to find the compressive strength of concrete, but the maturity method has the advantage of prognosticating strength without destruction. The temperature-time factor is found using a LM35 temperature sensor through the IoT technique. An experimental investigation was carried out with 56 concrete cubes, where 35 cubes were for obtaining the compressive strength of concrete using a universal testing machine while 21 concrete cubes monitored concrete's temperature by embedding a temperature sensor in each grade of M25, M30, M35, and M40 concrete. The mathematical prediction model equation was developed based on the temperature-time factor during the early age compressive strength on the 1^st, 2^nd, 3^rd and 7^th days in the M25, M30, M35, and M40 grades of concrete with their temperature. The 14^th, 21^st and 28^th day's compressive strength was predicted with the mathematical predicted equation and compared with conventional results which fall within a 2% difference. The compressive strength of concrete at any desired age (day) before reaching 28 days results in the discovery of the prediction coefficient. Comparative analysis of the results found by the predicted mathematical model show that, it was very close to the results of the conventional method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.57-63
• /
• 1986

Atmospheric particulate matter (A.P.M.) was collected on quartz fiber filters from March 1985 to May 1986 according to particle size using Andersen high-volume air sampler, and 6 heavy metals (Fe, Mn, Cu, Ni, Zn, Pb) in these particulates were analyzed by atomic absorption spectrophotometry. The arithmetic mean concentration of A.P.M. was 195.57$\mug/m^3$. The arithmetic mean concentrations of 6 metals (Fe, Mn, Cu, Ni, Zn and Pb) were 3385.04, 1451.67, 897.94, 159.68, 127.14 and 59.49 $ng/m^3$ respectively. The order of heavy metals contributing to A.P.M. was as follows: Fe > Zn > Pb > Cu > Mn > Ni. These heavy metals were devided into 3 groups according to their particle size distribution. The contents of heavy metals belonging to the 1st group (Fe, Mn) were increased with the particle size. On the contrary, the content of Pb belonging to the 2nd group (Pb) was increased with the decrease in the particle size. The heavy metal contents in the 3rd group (Ni, Cu, Zn) were lowest in the particle size range of 2.0-3.3 $\mum$ compared with particles larger or smaller tha this range. The seasonal variation of heavy metal concentration were as follows: Fe and Mn contents were highest in spring, but Ni and Pb contents were highest in winter. Statistical analysis showed that there was a significant correlation between A.P.M. and Fe in coarse particles, meanwhile between A.P.M. and Pb in the case of fine particles.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.180-187
• /
• 2017

The aim of this study was to investigate and compare fluoride release of giomer (Beautifil Injectable), compomer ($Dyract^{(R)}$ XP), and composite resin ($Filtek^{TM}$ Z350XT) through adhesive (Scotchbond Multi-Purpose) layer. A total of 20 cylindrical specimens (7 mm in diameter and 2 mm in thickness) of giomer, compomer and composite resin were prepared according to the manufacturers' instruction (10 with adhesive and 10 without adhesive). These specimens were immersed individually in 2 mL of deionized water at $37^{\circ}C$. The amount of fluoride release was measured on the $1^{st}$, $3^{rd}$, $7^{th}$, $14^{th}$, $21^{st}$, and $28^{th}$ day. To confirm uniform application of the adhesive layer, additional 18 specimens with adhesive were prepared and evaluated by scanning electron microscope. The giomer and compomer groups with adhesive applied showed no fluoride release until the $3^{rd}$ day. However, from the $7^{th}$ day, fluoride was detected. The application of dentin adhesive did not completely prevent fluoride release from giomer or compomer. Fluoride release was significantly (p < 0.05) reduced through the adhesive layer. The reduction of fluoride release was more remarkable on the giomer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.522-527
• /
• 2015

Decision of available soil depth based on soil physical and hydraulic properties for the $3^{rd}$ Landscape Vegetation Project in the Incheon International Airport was attempted. The soil samples were collected from the 8 sites at different depths, 0-20 and 20-60cm, for the three project fields, A, B, and C area. Physical and chemical properties including particle size distribution, organic matter content and electrical conductivity were analyzed. Hydrological properties including bulk density and water holding capacity at different water potential, -6 kPa, -10 kPa, -33 kPa, and -1500 kPa were calculated by SPAW model of Saxton and Rawls (2006), and air entry value was calculated by Campbell model (1985). Based on physical and hydrological limitation, feasibility and design criteria of soil depth for vegetation and landfill were recommended. Since the soil salinity of the soil in area A area was $19.18dS\;m^{-1}$ in top soil and $22.27dS\;m^{-1}$ in deep soil, respectively, landscape vegetation without amendment would not be possible on this area. Available soil depth required for vegetation was 2.51 m that would secure root zone water holding capacity, capillary fringe, and porosity. Available soil depth required for landscape vegetation of the B area soil was 1.51 m including capillary fringe 0.14 m and available depth for 10% porosity 1.35 m. The soils in this area were feasible for landscape vegetation. The soil in area C was feasible for bottom fill purpose only due to low water holding capacity.

• Korean Journal of Community Nutrition
• /
• v.4 no.1
• /
• pp.20-29
• /
• 1999

This study was done to investigate the nutrient intakes and plasma biochemcial indices in 68 female college students according to their skin types. Nutrient intakes were investigated by quick estimation. The plasma TG and total cholesterol levels were measured by the Spotchem sp-4410. The plasma levels of retinol and $\alpha$-tocopherol were measured by HPLC. In addition, the activities of antioxidant defense enzymes such as plasma glutathione peroxidase(GSH-Px) and glutathione reductase(GHS-Rd) were determined. All data were statistically analyzed by SAS PC package program. The results of this study were as follows : The average age, height, weight, BMI, systolic blood pressure and diastolic blood pressure ofthe subjects were $20.9{\pm}1.9yr, 160.7{\pm}4.3cm, 53.0{\pm}7.1kg, 20.5{\pm}2.4kg/m^2, 105.3{\pm}11.5mmHg and 70.6{\pm}7.7mmHg$, respectively. Ten students(14.7%) had normal skin type, 19 students(27.9%) had dry skin type, 11 students(16.2%) had oily skin type, 17 students(25.0%) had acne and 11 students(16.2%) had mixed skin type. The intakes of energy and fats in oily skin group were significantly higher(p<0.05) than those of the dry skin group, but vitamin C intake in the mixed skin group was significantly higher(p<0.05) than those of the dry skin group, but vitamin C intake in the mixed skin group was significantly lower(p<0.05) than that in other skin types. The intakes of other nutrients were not significantly different among skin types. The analysis of lipids showed that the plasma total-cholesterol level of mixed skin group was significantly lower(p<0.05) than that of the oily skin group, whereas other lipid levels were not significantly different. The other parameters such as retinol, $\alpha$-tocopherol, GSH-Px and GSH-Rd of plasma were not significantly different among skin types. Overall results indicate that dietary intake pattern may influence skin type and thereby some blood biochemical indices can be different by skin types.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.316-323
• /
• 2011

To test the applicability of resistivity survey methods for the archaeological prospection of a large-scale tumulus, a three-dimensional resistivity survey was conducted at the $3^{rd}$ tumulus at Bokam-ri, in Naju city, South Korea. Since accurate topographic relief of the tumulus and electrode locations are required to obtain a high resolution image of the subsurface, electrodes were installed after making grids by threads, which is commonly used in the archaeological investigation. In the data acquisition, data were measured using a 2 m electrode spacing with the line spacing of 1 m and each survey line was shifted 1 m to form an effective grid of 1 m ${\times}$ 1 m. Though the 3-D inversion of data, we could obtain the 3-D image of the tumulus, where we could identify the brilliant signature of buried tombs made of stones. The results were compared with the previous excavation results and we could convince that a 3-D resistivity imaging method is very useful to investigate a large-scale tumulus.

• Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.72-80
• /
• 2020

Background: Antibiotics are widely used to treat animals from infections. After fertilizing, antibacterials can remain in the soil while adversely affecting the soil microorganisms. The concentration of oxytetracycline (OTC) in the soil and its effect on the soil microbial community was assessed. To assess the impact of OTC on the soil microbial community, it was added to the soil at concentrations of 50, 150, and 300 mg kg^-1 and incubated for 35 days. Results: The concentration of OTC added to the soil decreased from 150 to 7.6 mg kg^-1 during 30 days of incubation, as revealed by LC-MS. The deviations from the control values in the level of substrate-induced respiration on the 5th day of the experiment were, on average, 26, 68, and 90%, with OTC concentrations at 50, 150, and 300 mg kg^-1, respectively. In samples with 150 and 300 mg kg^-1 of OTC, the number of bacteria from the 3rd to 14th day was 2-3 orders of magnitude lower than in the control. The addition of OTC did not affect the fungal counts in samples except on the 7th and 14th days for the 150 and 300 mg kg^-1 contaminated samples. Genes tet(M) and tet(X) were found in samples containing 50, 150, and 300 mg kg^-1 OTC, with no significant differences in the number of copies of tet(M) and tet(X) genes from the OTC concentration. Conclusions: Our results showed that even after a decrease in antibiotic availability, its influence on the soil microbial community remains.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.861-865
• /
• 2005

2,4-Dinitrophenylhydrazine (DHP), indophenol, and HPLC methods, which are generally used to analyze vitamin C, were evaluated by comparing changes in vitamin C contents in various samples kept at 10 and $20^{\circ}C$. Amount of total ascorbic acid (TAA) in yoghurt A kept at $10^{\circ}C$, as measured by DNP method, decreased from 26.7mg/100mL for early period to 22.8mg/100mL for final period of storage, whereas, on 3rd and 10th storage days, increased contrary to general results. Using indophenol, TAA measured at 28.6 and 9.5mg/100mL, and 30.5 and 14.6mg/100mL using HPLC far early and final periods, respectively. With indophenol and HPLC, TAA amount showed steady tendency to decrease. In conclusion, HPLC is the most suitable method to analyze vitamin C content, and indophenol method can be also used during early storage stage.