• 한국광학회지
• /
• 제2권4호
• /
• pp.186-192
• /
• 1991

엑시머 레이저빔($\lambda$ 0.248$\mu\textrm{m}$)을 사용하여 micro-lithography를 위해 축소배율 $5\times$를 갖는 4개의 구면으로 구성된 반사경계를 설계하였다. 먼저 초기광학계로서 Seidel 3차 수차 내에서 구면수차, 코마, 상면만곡, 왜곡수차가 제거된 4구면경계를 해석적으로 구하였다. 이 초기광학계의 성능 향상을 위해 컴퓨터를 이용한 최적화 기법을 사용하였고 그 결과 KrF 엑시머 레이저 광에 대해 N.A. 0.15와 image field diameter 3.3 mm 이내에서 회절 한계까지 제거된 수차 성능을 얻었다.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.876-885
• /
• 2000

추가적인 DC 측정이나 반복 계산법 또는 최적화 방법에 의존하지 않고도, 정상적인 바이어스(Normal activebias) 조건에서 측정하 S-파라미터로부터 MESFET과 HEMT의 외부 기생 저항을 간단히 구할 수 있는 방법이 제시되었다. 이를 위해서 zero 바이어스 조건에서 측정한 Z-파라미터로부터 Rs와 Rd의 차이를 구할수 있다는 사실이 이용된다. 측정한 S-파라미터로부터 외부 기생 인덕터와 캐패시터의 효과를 제거하면, 내부 소자와 외부 기생 저항을 포함한 새로운 소자를 정의할 수 있다. 내부 소자의 Y-파라미터인 Yint,11과 Yint,12의 실수부 값이 이론적으로 0이라는 사실을 이용하여 S-, Y-, Z-파라미터 행렬간의 상화관계를 이용하여 기생 저항 값을 쉽게계산할수 있다. 제시된 방법으로 기생 저항들을 구하고, 이 결과를 이용하여 내부 소자 등가회로를 구한 후에 40GHz까지 S-파라미터를 계산한 결과, 측정된 S-파라미터와 잘 일치하였다.

• Journal of Ginseng Research
• /
• 제46권3호
• /
• pp.367-375
• /
• 2022

Background: Short-term hydroponic-cultured ginseng (sHCG), which is 1-year-old ginseng seedlings cultivated for 4 weeks in a hydroponic system, is a functional food item with several biological effects. However, the optimal extraction conditions for sHCG, and the bioactivity of its extracts, have not been evaluated. Methods: Chlorogenic acid (CGA) and ginsenoside contents were evaluated in sHCG, white ginseng (WG), and red ginseng (RG) using high-performance liquid chromatography. Response surface methodology (RSM) was used to optimize the extraction conditions (temperature and ethanol concentration) to maximize the yield of dry matter, CGA, and four ginsenosides (Re, Rg₁, Rb₁, and Rd) from sHCG. The optimal extraction conditions were applied to pilot-scale production of sHCG extracts. The expression levels of tumor necrosis factor (TNF)-α/interferon (IFN)-γ-induced thymic and activation-regulated chemokines (TARC/CCL17) were measured after treatment with sHCG, WG, and RG extracts, and the effects of their bioactive compounds (CGA and four ginsenosides) on human skin keratinocytes (HaCaTs) were evaluated. Results: CGA and four ginsenosides, which are bioactive compounds of sHCG, significantly inhibited TNF-α/IFN-γ-induced TARC/CCL17 expression. The optimal sHCG extraction conditions predicted by the RSM models were 80 ℃ and 60% ethanol (v/v). The sHCG extracts produced at the pilot scale under optimal conditions greatly alleviated TNF-α/IFN-γ-induced TARC/CCL17 production compared with WG and RG extracts. Conclusions: Pesticide-free sHCG extracts, which contain high levels of CGA and the ginsenosides Re, Rg₁, Rb₁, and Rd as bioactive compounds, may have therapeutic potential for atopic diseases.

• 한국콘텐츠학회논문지
• /
• 제16권10호
• /
• pp.514-521
• /
• 2016

HEVC 비디오 압축 표준은 기존 비디오 표준보다 더 다양한 블록 구조와 예측 모드를 사용함으로써 우수한 부호화 성능을 제공하나, 최적의 블록 크기 및 예측 모드를 결정하기 위한 RDO(Rate Distortion Optimization)과정으로 인해 연산량이 많다는 단점을 가진다. 이를 개선하기 위해 본 논문에서는 화면 내 예측 수행 전 CU영역의 모멘트 값을 계산하고 이를 CU영역의 텍스쳐 복잡도로 이용하여 CU의 분할 여부를 결정하는 모멘트 기반의 고속 CU크기 결정 방법을 제안한다. 제안하는 방법은 기존의 방법을 차용하여 CU영역의 밝기 값에 대한 분산 값을 계산하여 영역의 텍스쳐 평평도를 추정하고, 추가로 CU영역의 밝기 값에 대한 비대칭도를 계산하여 CU영역을 이루는 밝기 값 분포의 비대칭성 정도를 측정한 뒤 이를 조합하여 기존 방법보다 더 정밀하게 텍스쳐 복잡도를 측정하였으며, 이를 RDO과정 중 현재 CU의 분할 여부를 결정하는데 이용하여 기존의 부정확한 CU분할 여부 결정 방법을 개선시킨 고속 CU크기 결정 방법을 제안한다. 제안 방법의 실험 결과는 기존 방법 대비 4.2%의 BD-rate 감소를 보여주며, HM-10.0과 비교하여 BD-rate는 1.1% 증가하였고, 인코딩 시간이 32% 절감되었다.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.345-359
• /
• 2011

Decode-and-forward relaying is a promising enhancement to existing radio access networks and is already standardized in 3rd generation partnership project (3GPP) as a part of long term evolution (LTE)-Advanced Release 10. Two inband operation modes of relay nodes are supported, namely type 1 and type lb. Relay nodes promise to offer considerable gain for system capacity or coverage, depending on the deployment prioritization, in a cost-efficient way. Yet, in order to fully exploit the benefits of relaying, the inter-cell interference which is increased due to the presence of relay nodes should be limited. Moreover, large differences in the received power levels from different users should be avoided. The goal is to keep the receiver dynamic range low in order to retain the orthogonality of the single carrier-frequency division multiple access system. In this paper, an evaluation of the relay based heterogeneous deployment within the LTE-Advanced uplink framework is carried out by applying the standardized LTE Release 8 power control scheme both at evolved node B and relay nodes. In order to enhance the overall system performance, different power control optimization strategies are proposed for 3GPP urban and suburban scenarios. A comparison between type 1 and type 1b relay nodes is as well presented to study the effect of the relaying overhead on the system performance in inband relay deployments. Comprehensive system level simulations show that the power control is a crucial means to increase the cell edge and system capacities, to mitigate inter-cell interference and to adjust the receiver dynamic range for both relay node types.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.468-475
• /
• 2012

A proper stacking force and assembly are important to the performance of fuel cell. Improper assembly pressure may lead to leakage of fuels and high interfacial contact resistance, excessive assembly pressure may result in damage to the gas diffusion layer and other components. The pressure distribution of gas diffusion layer is important to make interfacial contact resistance less for stack performance. To analyze the influence of design parameter factors for pressure distribution, and to optimize stack design, DOE (Design of Experiment) was used for polymer electrolyte membrane fuel cell stack pressure test. As commonly known, the higher clamping force improves the fuel cell stack performance. However, non-uniformity of stress distribution is also increased. It shows that optimization between clamping force and stress distribution is needed for well designed structure of fuel cell stack. In this study, stack design optimization method is suggested by using FEM (Finite Element Methode) and DOE for light-weighted fuel cell stack.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.459-464
• /
• 2004

The objective of this study is to improve cephalosporin C (CPC) production byoptimization of medium and culture conditions. A statistical method was introduced to optimize the main culture medium. The main medium for CPC production was optimized using a statistical method. Glucose and corn steep liquor (CSL) were found to be the most effective factors for CPC production. Glucose and CSL were optimized to 2.84 and $6.68\%$, respectively. CPC produc­tion was improved $50\%$ by feeding of $5\%$ rice oil at day 3rd and 5th day during the shake flask culture of C acremonium M25. The effect of agitation speeds on CPC production in a 2.5-L bio­reactor was also investigated with fed-batch mode. The maximum cell mass (54.5 g/L) was obtained at 600 rpm. However, the maximum CPC production (0.98 g/L) was obtained at 500 rpm. At this condition, the maximum CPC production was improved about $132\%$ compared to the re­sult with batch flask culture.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.225-237
• /
• 2013

Excessive vibrations induced by earthquake excitation and wind load are an obstacle in design and construction of tall and super tall buildings. An innovative vibration control structure system (Mega-Sub Controlled Structure System-MSCSS) was recently proposed to further improve humans comfort and their safeties during natural disasters. Preliminary investigations were performed using a two dimensional equivalent simplified model, composed by 3 mega-stories. In this paper, a more reasonable and realistic scaled model is design to investigate the dynamical characteristics and controlling performances of this structure when subjected to strong earthquake motion. The control parameters of the structure system, such as the modulated sub-structures disposition; the damping coefficient ratio (RC); the stiffness ratio (RD); the mass ratio of the mega-structure and sub-structure (RM) are investigated and their optimal values (matched values) are obtained. The MSCSS is also compared with the so-called Mega-Sub Structure (MSS) regarding their displacement and acceleration responses when subjected to the same load conditions. Through the nonlinear time history analysis, the effectiveness and the feasibility of the proposed mega-sub controlled structure system (MSCSS) is demonstrated in reducing the displacement and acceleration responses and also improving human comfort under earthquake loads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.361-365
• /
• 1991

The problem being considered here is the determination of optimal guidance laws for a launch vehicle for scientific missions. The optimal guidance commands are determined in the sense that the least amount of fuel is used. A numerical solution was obtained for the case where the position and velocity state variables satisfy a specified constraint at the time of thrust cutoff. The method used here is based on the Pontryagin's maximum principle. This is the method of solving a problem in the calculus of variations. In particular, it applies to the problem considered here where the magnitude of the control is bounded. Simulations for the optimal guidance algorithm, during the 2nd and the 3rd-stage flight of the Japanese rocket M-3H-3, are carried out. The results show that the guided trajectory that satisfying the terminal constraints is optimal, and the guidance algorithm works well in the presence of some errors during the 1st-stage pre-programmed guidance phase.

• 한국유체기계학회 논문집
• /
• 제4권4호
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.