• 한국수자원학회논문집
• /
• 제53권1호
• /
• pp.1-13
• /
• 2020

높은 레이놀즈수를 갖는 공학적인 흐름을 예측하는 가장 일반적인 방법은 여전히 벽함수를 이용하는 난류모형에 근거한 RANS 수치모의이다. 최근 벽근처의 점성영역 관계식과 벽에서 떨어진 대수영역 관계식을 혼합하여 개발된 일반화된 벽함수들은 두 영역사이의 난류량과 유속이 부드럽게 천이하도록 한다. 이 연구는 난류운동에너지(TKE), 에너지 소산율, 비소산율, 와점성에 대해서 적용 가능한 벽함수들을 조합하여 일련을 수치 모의를 수행하여 널리 이용되고 있는 난류모형들의 성능과 수렴 특성을 분석하였다. 이 연구 결과는 RNG k-𝜖 모형의 경우 첫번째 계산격자가 완충층에 놓이게 될 때는 반복 계산시 작은 허용오차를 이용하여 주의 깊게 적용을 하여야 안정된 해를 구할 수 있음을 보여준다. 표준 k-𝜖과 RNG k-𝜖 모형은 TKE와 와점성에 대해서 적용 가능한 벽함수들 중 어느 것을 선택하여 적용하더라도 수치모의 결과가 민감하게 반응하지 않는 것으로 나타났다. 한편, k-ω SST 모형의 경우 TKE에 대해서는 kL-벽함수 그리고 와점성에 대해서는 nutUB-벽함수를 이용하여야 정확하고 안정된 경계 조건 설정을 보장할 수 있다. 레이놀즈수 155,000조건에서 적용한 후방계산흐름 수치모의 결과 격자 해상도에 상관없이 약 13% 정도 재부착 거리를 과소평가하는 모형을 제외하고 나머지 적용한 난류모형들 모두 적절히 세밀한 해상도의 격자에서 양호하게 재부착거리를 잘 예측하는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.697-706
• /
• 2019

다상흐름 모델링 기법과 하이브리드 난류 모델링 기법을 결합한 수치모형을 이용하여 사각형 수로에서의 중력류를 수치모의 하였다. 이 연구에서 적용한 다상흐름 해석기법은 밀도가 큰 중력류 유체, 상대적으로 밀도가 작은 주변류 유체 그리고 자유수면 위에서 흐르는 공기를 3개의 상으로 처리하며, 각 상에 대해서 분리된 흐름 지배방정식을 적용한다. 난류흐름은 벽경계 근처에서는 RANS 모드로 모의하고 벽에서 떨어진 영역에서는 LES 모드로 해석하는 하이브리드 RANS/LES 방법의 일종인 IDDES 기법을 이용하여 해석한다. 이 연구에서 적용한 모델링 기법은 중력류의 머리의 전파속도를 실험값과 일치하게 잘 예측하는 것으로 나타났다. 수치해석 결과는 아울러 낮은 레이놀즈수 난류모형을 이용한 RANS 수치모의에서 이용되는 정도의 격자해상도에서도 큰 규모의 Kelvin-Helmholtz 형식의 경계면 와의 발달과 이들 와가 지속적으로 3차원 형식의 붕괴를 거쳐 작은 난류구조로 분해되면서 난류에너지가 소산되는 현상을 성공적으로 예측함을 보여준다. 적용한 수치모의 기법은 공학적으로 접근 가능한 격자해상도에서 돌출-쪼개짐 흐름 불안정을 동반한 중력류 머리부분의 3차원 거동 특성을 잘 재현하며, 이 결과는 보다 높은 격자해상도에서 구해진 LES 결과에 상응하는 것으로 나타났다. 이 연구결과는 하이브리드 난류모델링 기법과 다상흐름 해석기법을 병합한 수치모형이 자연상태에서 복잡한 중력류의 물리적 거동을 예측하는데 공학적으로 유망한 방법임을 보여준다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1287-1292
• /
• 2007

Recently, the frequency of unexpecting heavy rains has been increased due to abnormal climate and extreme rainfall. There was a limit to analyze 1D or 2D stream flow that was applied simple momentum equation and fixed energy conservation. Therefore, hydrodynamics flow analysis in rivers has been needed 3D numerical analysis for correct stream flow interpretation. In this study, CFD model on FLOW-3D was applied to stream flow analysis, which solves three dimenson RANS(Reynolds Averaged Navier-Stokes Equation) control equation to find out physical behavior and the effect of hydraulic structures. Numerical simulation accomplished those results was compared by using turbulence models such as ${\kappa}-{\varepsilon}$, RNG ${\kappa}-{\varepsilon}$ and LES. Those numerical analysis results have been illustrated by the turbulence energy effects, velocity of flow distributions, water level pressure distributions and eddy flows around the piers at Jangwall bridge in urbarn stream.

• Journal of Ship and Ocean Technology
• /
• 제8권1호
• /
• pp.10-30
• /
• 2004

High-fidelity RANS simulations are presented for a ducted marine propulsor, including verification ＆ validation (V＆V) using available experimental fluid dynamics (EFD) data. CFDSHIP-IOWA is used with $\textsc{k}-\omega$ turbulence model and extensions for relative rotating coordinate system and Chimera overset grids. The mesh interpolation code PEGASUS is used for the exchange of the flow information between the overset grids. Intervals V＆V for thrust, torque, and profile averaged radial velocity just downstream of rotor tip are reasonable in comparison with previous results. Flow pattern displays interaction and merging of tip-leakage and trailing edge vortices. In interaction region, multiple peaks and vorticity are smaller, whereas in merging region, better agreement with EFD. Tip-leakage vortex core position, size, circulation, and cavitation patterns for $\sigma=5$ also show a good agreement with EFD, although vortex core size is larger and circulation in interaction region is smaller.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.1-10
• /
• 2001

비 압축성 점성 유동에 대한 RANS 방정식의 수치 해법을 사용해서 4상한(four quadrant) 조건에서 작동하는 박용 프로펠러 주위의 난류 유동과 프로펠러 단독 성능을 계산하였다. 4상한 조건의 단독 성능에 대한 실험결과가 존재하는 모형 프로펠러 P4381에 대하여 계산된 유동은 다양한 조건에서 프로펠러에 발생하는 3차원 유동박리를 포함한 복잡한 점성유동 특성을 잘 보여주었으며, 계산된 프로펠러 추력과 토크는 실험에서 캐비테이션이 심하게 발생된 일부 경우를 제외하고는 실험 결과와 잘 일치하였다.

• 한국전산유체공학회지
• /
• 제13권2호
• /
• pp.55-61
• /
• 2008

The Reynolds-Averaged Navier-Stokes(RANS) analysis of the 3-D steady flow around the NREL Phase VI horizontal axis wind turbine(HAWT) rotor was performed. The CFD analysis results were compared with experimental data at several different wind speeds. The present CFD model shows good agreements with the experiments both at low wind speed which formed well-attache flow mostly on the upper surface of the blade, and at high wind speed which blade surface flow completely separated. However, some discrepancy occurs at the relatively high wind speeds where mixed attached and separated flow formed on the suction surface of the blade. It seems that the discrepancy is related to the onset of stall phenomena and consequently separation prediction capability of the current turbulence model. It is also found that strong span-wise flow occurs in stalled area due to the centrifugal force generated by rotation of the turbine rotor and it prevents abrupt reduction of normal force for higher wind speed than the designed value.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.104-111
• /
• 2009

The existing code which solves two-dimensional RANS(Reynolds Averaged Navier-Stokes) equations and 2-equation turbulence model equations was modified to enable numerical simulation of various supersonic flows. For this, various boundary conditions have been implemented to the code. Bleed boundary condition was incorporated into the code for calculating wall mean flow quantities. Furthermore, the boundary conditions for the turbulence quantities along rough surfaces as well as porous walls were applied to the code. The code was verified and validated by comparing the computational results against the experimental data for the supersonic flows over bleed region on a flat plate. Using the newly modified code, numerical simulations were performed and compared with other computational results as well as the experimental data for the supersonic flows over an oblique shock with a bleed region.

• 한국해양공학회지
• /
• 제31권5호
• /
• pp.340-345
• /
• 2017

It is important to predict the hydrodynamic maneuvering derivatives, which consist of the forces and moment acting on a hull during a maneuvering motion, when estimating the maneuverability of a ship. The estimation of the maneuverability of a ship with a change in the stern hull form is often performed at the initial design stage. In this situation, a method that can reflect the change in the hull form is necessary in the prediction of the maneuverability of the ship. In particular, the linear hydrodynamics maneuvering derivatives affect the yaw checking motion as the key factors. In the present study, static drift calculations were performed using Computational Fluid Dynamics (CFD) based on Reynolds Average Navier-Stokes (RANS) for a 40-segment hull. A prediction method for the linear hydrodynamic maneuvering derivatives was proposed using the slender body theory from the distribution of the lateral force acting on each segment of the hull. Moreover, the results of a comparison study to the model experiment for KVLCC1 performed by KRISO are presented in order to verify the accuracy of the static drift calculation. Finally, the linear hydrodynamic maneuvering derivatives obtained from both the model test and calculation are compared and presented to verity the usefulness of the method proposed in this study.

• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.66-76
• /
• 2011

The heat transfer and pressure loss characteristics of a rotating two-pass channel with a guide vane in the turning region have been studied using three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis, and the shape of the guide vane has been optimized using surrogate modeling optimization technique. For the optimization, thickness, location and angle of the guide vanes have been selected as design variables. The objective function has been defined as a linear combination of the heat transfer and the friction loss related terms with a weighting factor. Latin hypercube sampling has been applied to determine the design points as design of experiments. A weighted-average surrogate model, PBA has been used as the surrogate model. The guide vane in the turning region does not influence the heat transfer in the first passage upstream of the turning region, but enhances largely the heat transfer in the turning region and the second passage. In an example of the optimization, the objective function has been increased by 13.6%.

• Asian Journal of Atmospheric Environment
• /
• 제11권4호
• /
• pp.270-282
• /
• 2017

To evaluate the deposition amount on a ground surface, mesoscale numerical models coupled with atmospheric chemistry are widely used for larger horizontal domains ranging from a few to several hundreds of kilometers; however, these models are rarely applied to high-resolution simulations. In this study, the performance of a dry and wet deposition model is investigated to estimate the amount of deposition via computational fluid dynamics (CFD) models with high grid resolution. Reynolds-averaged Navier-Stokes (RANS) simulations are implemented for a cone and a two-dimensional ridge to estimate the dry deposition rate, and a constant deposition velocity is used to obtain the dry deposition flux. The results show that the dry deposition rate of RANS generally corresponds to that observed in wind-tunnel experiments. For the wet deposition model, the transport equation of a new scalar concentration scavenged by rain droplets is developed and used instead of the scalar concentration scavenged by raindrops falling to the ground surface just below the scavenging point, which is normally used in mesoscale numerical models. A sensitivity analysis of the proposed wet deposition procedure is implemented. The result indicates the applicability of RANS for high-resolution grids considering the effect of terrains on the wet deposition.