• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1088-1094
• /
• 2002

A channel flow with a high Reynolds number but coarse grids is numerically studied to investigate the prediction possibility of its turbulence which is three-dimensional and time-dependent. In the present paper, a Reynolds-Averaged Navier-Stokes (RANS) model, a Large Eddy Simulation (LES) and a Navier-Stokes equation with no model are tested with a new approach of hybrid RANS/LES, which reduces to RANS model in the boundary layers and at separation, and to Smagorinsky-like LES downstream of separation, and then compared with each other. It is found that the simulations of hybrid RANS/LES method sustain turbulence like those of LES and with no model, and the results are stable and fairly accurate. This indicates strongly that gradual improvements could lead to a simple, stable, and accurate approach to predict turbulence phenomena of wall-bounded flow.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.304-309
• /
• 2017

This paper studies a nonpremixed turbulent flame in a model scramjet combustor using zonal hybrid RANS/LES method. The numerical domain is divided into two region, RANS and LES region. The interface between the two regions is treated with synthetic eddy method. A model scramjet combustor experimented at German aerospace center is selected for the comparative study. The fuel injection of cracked kerosene surrogate which is composed of ethylene and methane is considered. Turbulent combustion of cracked kerosene surrogate is achieved using flamelet approach.

• Wind and Structures
• /
• v.8 no.6
• /
• pp.407-426
• /
• 2005

A hybrid RANS/LES approach, based on the Limited Numerical Scales concept, is applied to the numerical simulation of the flow around a square cylinder. The key feature of this approach is a blending between two eddy-viscosities, one given by the $k-{\varepsilon}$ RANS model and the other by the Smagorinsky LES closure. A mixed finite-element/finite-volume formulation is used for the numerical discretization on unstructured grids. The results obtained with the hybrid approach are compared with those given by RANS and LES simulations for three different grid resolutions; comparisons with experimental data and numerical results in the literature are also provided. It is shown that, if the grid resolution is adequate for LES, the hybrid model recovers the LES accuracy. For coarser grid resolutions, the blending criterion appears to be effective to improve the accuracy of the results with respect to both LES and RANS simulations.

• Journal of computational fluids engineering
• /
• v.9 no.2
• /
• pp.23-29
• /
• 2004

A numerical simulation of an incompressible cavity flow is conducted using the hybrid turbulence model. The model adopted is a modified type of DES using k- ε two-equation model. Cavity geometry and flow condition are based on Cattafesta's experiment. Computational results are compared with the results of Cattafesta's experiment. The simulation successfully predicts the oscillatory features and the Strouhal number of the oscillation compares very favorably with that of the dominant mode of experimental data. Vorticity contours obtained from the simulation data are consistent with the smoke visualization of the Cattafesta's experiment. The coherent structures of cavity flow are also investigated using Q criterion.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.329-344
• /
• 2017

This paper introduces a BEM/RANS interactive scheme to predict the contra-rotating propeller (CRP) performance. In this scheme, the forward propeller and the aft propeller are handled by two separate BEM models while the interactions between them are achieved by coupling them with a RANS solver. By using the body force field and mass source field to represent the propeller in the RANS model, the number of RANS cells and the number of required RANS iterations reduce significantly. The method provides an efficient way to predict the effective wake, the steady/unsteady propeller forces, etc. The BEM/RANS interactive scheme is first applied to a CRP in both an axisymmetric manner and a non-axisymmetric manner. Results are shown in good agreement with the experimental data in moderate to high advance ratios. It is proved that the difference between the axisymmetric scheme and the non-axisymmetric scheme mainly comes from the non-axisymmetric bodies. It is also found that the error is larger at lower advance ratios. Possible explanations are given. Finally, some additional cases are tested which justifies that the non-axisymmetric BEM/RANS scheme is able to handle a podded CRP working at given inclination angles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.703-714
• /
• 2010

This paper describes the design optimization of a rotating rectangular channel with staggered arrays of pin-fins by Kriging metamodeling technique. Two non-dimensional variables, the ratio of the height to the diameter of the pin-fins and the ratio of the spacing between the pin-fins to the diameter of the pin-fins are chosen as the design variables. The objective function that is a linear combination of heat transfer and friction loss related terms with a weighting factor is selected for the optimization. To construct the Kriging model, objective function values at 20 training points generated by Latin hypercube sampling are evaluated by a three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis method with the SST turbulence model. The Kriging model predicts the objective function value that agrees well with the value calculated by the RANS analysis at the optimum point. The objective function is reduced by 11% by the optimization of the channel.

• Wind and Structures
• /
• v.37 no.4
• /
• pp.303-314
• /
• 2023

In this study, two steady RANS turbulence models (SST k-ω and Realizable k-ε) and four unsteady turbulence models (URANS SST k-ω and Realizable k-ε, SST-SAS, and SST-IDDES) are evaluated with respect to their capacity to predict crosswind characteristics on high-speed trains (HSTs). All of the numerical simulations are compared with the wind tunnel values and LES results to ensure the accuracy of each turbulence model. Specifically, the surface pressure distributions, time-averaged aerodynamic coefficients, flow fields, and computational cost are studied to determine the suitability of different models. Results suggest that the predictions of the pressure distributions and aerodynamic forces obtained from the steady and transient RANS models are almost the same. In particular, both SAS and IDDES exhibits similar predictions with wind tunnel test and LES, therefore, the SAS model is considered an attractive alternative for IDDES or LES in the crosswind study of trains. In addition, if the computational cost needs to be significantly reduced, the RANS SST k-ω model is shown to provide relatively reasonable results for the surface pressures and aerodynamic forces. As a result, the RANS SST k-ω model might be the most appropriate option for the expensive aerodynamic optimizations of trains using machine learning (ML) techniques because it balances solution accuracy and resource consumption.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.182-190
• /
• 2009

For RANS equation model using VOF scheme Lin and Liu (1999) developed internal wave-maker method to generate target wave trains by using designed mass source functions of the continuity equation. By using this method studies on various numerical wave experiments has been achieved without the problem caused by wave reflection due to an external wave-maker. In this study, the wave-maker method to generate target wave trains by using a momentum source function was proposed. The computational results obtained by applying the mass and momentum source functions into FLUENT were compared with each other. To see its applicability, the hydraulic experiment of Luth et al. (1994) were numerically simulated and their measurements are compared with the computations, and the vertical variations of computed results were shown and investigated.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3625-3634
• /
• 2021

The crossflow is the key phenomenon in turbulent flow inside rod bundles. In order to establish confidence on application of computational fluid dynamics (CFD) to simulate the crossflow in rod bundles, three Reynolds-Averaged Navier Stokes (RANS) models i.e. the realizable k-ε model, the k-ω SST model and the Reynolds stress model (RSM), and the Large Eddy simulations (LES) with the Wall-Adapting Local Eddy-viscosity (WALE) model are validated based on the Particle Image Velocimetry (PIV) flow measurement experiment in a 5 × 5 rod bundle. In order to investigate effects of periodic boundary condition in the gap, the numerical results obtained with four inner subchannels are compared with that obtained with the whole 5 × 5 rod bundle. The results show that periodic boundaries in the gaps produce strong errors far downstream of the spacer grid, and therefore the full 5 × 5 rod bundle should be simulated. Furthermore, it can be concluded, that the realizable k-ε model can only provide reasonable results very close to the spacer grid, while the other investigated models are in good agreement with the experimental data in the whole downstream flow in the rod bundle. The LES approach shows superiority to the RANS models.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.127-127
• /
• 2017

침수식생이 식재된 개수로에서 식생밀도에 따라 유동 및 난류의 특성이 변화된다. 이러한 특성은 식생에서의 유사, 영양물질, 용존 산소 등에 영향을 미치며 수중 생물의 서식에 변화를 준다. 따라서 침수식생이 식재된 개수로 흐름을 이해하는 것은 중요하게 여겨지고 있으며 많은 선행연구자들에 의해 실험 및 수치모의를 통해 활발히 연구되고 있다. 하지만 대부분의 RANS(Reynolds-Averaged Navier-Stokes)를 기반으로 한 선행연구에서는 침수식생의 흐름 특성을 반영하지 않은 모형을 이용하여 정확한 모의 결과를 도출하지 못 하였다. 이에 정확한 침수식생 흐름을 수치모의하기 위해서는 침수식생 흐름의 특성을 반영한 지배방정식을 이용해야 한다. 본 연구의 목적은 침수식생 흐름의 특성을 RANS 모형 중의 하나인 SA (Spalart-Allmaras) model에 반영하고, 식생밀도에 따른 유동 및 난류량을 실측치와 비교하는 것이다. RANS 방정식을 이용하여 난류모델링을 하였으며, 난류폐합문제를 해결하기 위해서 modified SA model을 이용하였다. 침수식생에서의 흐름을 해석하기 위해 운동량방정식에 식생항력을 추가하였다. 선행연구자의 식생수로 실험을 바탕으로 모형검증을 하였으며, 식생밀도에 따라 평균유속 및 난류구조를 확인하였다.