• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.177-182
• /
• 2002

Purpose : To validate the arthroscopic synovectomy for the treatment of hemophilic knee. Materials and Methods: From January 1996 to January 2001, 28 arthroscopic synovectolny were performed in 26 patients with hemophilic arthropathy of the knee. The mean age was 17.8 years. The mean follow-up period was 3 years 11 months. We used six portals (two anterior, two suprapatellar and two posterior) and posterior trans-septal portal in all cases. Result : The mean frequency of hemarthrosis was 4 times per month preoperatively and 2 postoperatively. The mean amount of factor replacement was 4,633 units preoperatively and 1,505 postoperatively. The mean range of motion was $112^{\circ}$ preoperatively and $107^{\circ}$ postoperatively. On radiographic evaluation, three cases were progressed at the latest follow-up. On the subjective evaluation, significant or moderate improvement were in 19 cases $(68\%)$, and no improvement or deterioration in 9 cases $(32\%)$. Conclusion : With complete synovectomy through the appropriate arthroscopic portals, arthroscopic synovectomy of the knee in hemophilic patients is the successful method in decreasing bleeding episodes, amount of factor replacement, knee pain and preventing or delaying onset of end-stage hemophilic arthropathy.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.47-52
• /
• 2010

Purpose: To evaluate shoulder stability, clinical, and functional results more than 6 months after utilizing the 'Remplissage' technique, consisting of an arthroscopic posterior capsulodesis and infraspinatus tenodesis, to fill Hill-Sachs lesions. Materials and Methods: Seven patients were followed-up more than 6 months after the 'Remplissage' procedures performed in our hospital from August 2008 to August 2009. The mean age of the patients was 28.6 years and the mean follow-up time was 10 months. Evaluations included ROM, ASES score, KSSI score, ROWE score, and postoperative MRI. Results: In a functional evaluation of the patients with an average postoperative time of 10 months, the ASES score improved from 51.4 preoperatively to 76.8 postoperatively, the KSSI score improved from 46.5 preoperatively to 76 postoperatively, and the ROWE score improved from 43.5 preoperatively to 76.3 postoperatively. After an average postoperative time of 10 months, the range of motion was nearly normal (>170 degrees in further flexion, and >45 degrees in external rotation). Conclusion: In recurrent shoulder instabilities with large Hill-Sachs lesions, the 'Remplissage' technique resulted in good outcomes in terms of shoulder stability, clinical, and functional results after postoperative times of more than 6 months.

• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.187-215
• /
• 2006

Objectives : To determine whether the pragmatic acupuncture treatment provides more effective pain relief than treatment using the same acupuncture point to the all patients. Methods : We randomly allocated participants to treatment group 1 and 2. The group 1 is the pragmatic treatment group and the group 2 is using the same acupuncture point to the all patients. Primary outcomes were measured by the Western Ontario and McMaster Universities Osteoarthritis index(WOMAC) pain and function scores at 4, 8, and 14 weeks. Secondary outcomes were measured by 100mm VAS(Visual Analog Scale), ROM(Range of Motion) using Goniometer, and pain threshold using pressure algometer. Results : When patients were extension of the knee, they were statistically significant in improvement of the ROM in 14 weeks. Whole body condition and pain rate through VAS measurement were improved significantly in 14 weeks. Also pain score and function score of WOMAC were improved significantly in 14 weeks. We could get difference in pain score of two acupuncture groups significantly in 14 weeks. But we could not get difference in whole score of two acupuncture groups significantly. Local temperature using T.C thermometer was changed significantly in 14 weeks. But we could not get difference in whole score of two acupuncture groups significantly. Excluding above item, DITI, pain threshold, and ROM of the knee flexion were no difference in before and after treatment.

• Journal of the Korean association of regional geographers
• /
• v.11 no.6
• /
• pp.530-542
• /
• 2005

In this study, GIS method has been used to get fractal characteristics. Using the projected area and surface area, 2 dimensional fractal characteristic of terrain was found out. Correlation of fractal dimension and mean slope were also checked over. Results are as below. 1) To get a fractal dimension, the method which is using the surface area is also directly proportional to complexity of the terrain as other fractal dimension. 2) Fractal dimensions using the surface area, that is proposed in this thesis are carried out as below : Uiseong : $2.02{\sim}2.15$ Yeongcheon : $2.10{\sim}2.24$. These values are in a range of fractal $2.10{\sim}2.20$ dimensions which has known. 3) Correlation of mean slope and fractal dimension is diminished about 30% in a region which is more than $25^{\circ}$ of mean slope. So, in this region using the fractal dimension method is better than using the mean slope. From this study, on formula using the projected area and surface area is still good to get a fractal dimension that has been found. But to confirm this method the region of research should be wider and be set up the correlation of mean slope, surface area and fractal dimension. It can be applicable to restoration of terrain and traffic flow analysis in the future research.

• Archives of Hand and Microsurgery
• /
• v.23 no.4
• /
• pp.248-253
• /
• 2018

Purpose: The purpose of this study was to evaluate the clinical results of anatomic reduction of bony mallet finger using modified-intrafocal pinning technique. Methods: From March 2014 to October 2017, 18 patients with bony mallet finger were treated with modified-intrafocal pinning technique. Kirschner-wire was used to directly reduction the bony fragment, and extension block pinning and distal interphalangeal joint fixation were additionally performed to minimize the loss of reduction. Postoperative pain, range of motion, and radiological evaluation were performed. Duration of bone healing, functional recovery and complication rate were evaluated and Crawford's criteria was used to determine functional outcome after surgery. Results: Bone union was achieved in all cases after a postoperative mean of 6 weeks (5-7 weeks). An average of $2.8^{\circ}$ ($0^{\circ}-10^{\circ}$) extension loss occurred in all patients. All patients showed satisfactory joint congruency and reformation of the joint surface, the mean flexion angle of the distal interphalangeal joint at the final follow-up was $72.2^{\circ}$ ($70^{\circ}-75^{\circ}$). According to Crawford's classification, 12 patients (66.7%) were excellent and 6 patients (33.3%) were good. Conclusion: Modified-intrafocal pinning technique is a method of obtaining anatomical bone healing by directly reduction and fixation of the bony fragment. Combined with other conventional percutaneous pinning procedures, it is expected that good results can be obtained if applied to appropriate indications.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.4 no.1
• /
• pp.36-42
• /
• 2005

Purpose: To investigate the arthroscopic findings, and to evaluate the clinical outcomes of the treatment of posterior internal impingement of the shoulder in baseball players. Materials and Methods: We followed up 5 cases who were diagnosed as posterior internal impingement for the mean 15 months. All of the cases complained of the pain in the posterior shoulder at late cocking, and were positive in the relocation test added by hyper-horizontal abduction at $120^{\circ}$ abduction of the arm. We sutured posterior labral tear and SLAP lesion arthroscopically, and conducted debridement for rotator cuff. Three cases were performed of anterior capsular plication and the other two were performed of thermal capsular shrinkage. Pain, range of motion, and level of return to sports activity were assessed for the results. Results: As to the arthroscopic findings, all the five cases showed the fraying in posterosuperior labrum, and two of them was accompanied with the flap tear in posterosuperior labrum and the other one was accompanied with type 2 SLAP lesion. All the cases showed the fraying in supraspinatus, and one case showed partial tear. Meanwhile, in all the cases, the rotator cuff was impinged to the labrum at $90^{\circ}{\sim}120^{\circ}$ of abduction and external rotation. As to the postoperative results, all the cases did not complain of pain or instability while pitching, and the competition was recovered to be the mean 88%($80{\sim}100%$) of that before the injury. Conclusion: Definite diagnosis for the posterior internal impingement would be possible through arthroscopic examination. Favorable outcomes could be obtained with capsular plication or shrinkage for anterior microinstability and stretching exercise for posterior capsule tightness inducing the internal impingement.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.81-87
• /
• 2003

It is suggested that a flying-by star in a hot accretion disk may cool the hot accretion disk by the Comptonization of the stellar emission. Such a stellar cooling can be observed in the radio frequency regime since synchrotron luminosity depends strongly on the electron temperature of the accretion flow. If a bright star orbiting around the supermassive black hole cools the hot disk, one should expect a quasi-periodic modulation in radio, or even possible an anti-correlation of luminosities in radio and X-rays. Recently, the unprecedentedly accurate infrared imaging of the Sagittarius A$\ast$ for about ten years enables us to resolve stars around it and thus determine orbital parameters of the currently closest star S2. We explore the possibility of using such kind of observation to distinguish two quite different physical models for the central engine of the Sagittarius A$\ast$, that is, a hot accretion disk model and a jet model. We have attempted to estimate the observables using the observed parameters of the star S2. The relative difference in the electron temperature is a few parts of a thousand at the epoch when the star S2 is near at the pericenter. The relative radio luminosity difference with and without the stellar cooling is also small of order $10^{-4}$, particularly even when the star S2 is near at the pericenter. On the basis of our findings we tentatively conclude that even the currently closest pass of the star S2 is insufficiently close enough to meaningfully constrain the nature of the Sagittarius A$\ast$ and distinguish two competing models. This implies that even though Bower et al. (2002)have found no periodic radio flux variations in their data set from 1981 to 1998, which is naturally expected from the presence of a hot disk, a hot disk model cannot be conclusively ruled out. This is simply because the energy bands they have studied are too high to observe the effect of the star S2 even if it indeed interacts with the hot disk. In other words, even if there is a hot accretion disk the star like S2 has imprints in the frequency range at v $\le$ 100 MHz.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.165-182
• /
• 1997

The aim of this paper is to clarify geomorphic features on talus within ${\check{O}}rumkol$ and the origin of ${\check{O}}rumkol$. ${\check{O}}rumkol$ is located in Milyang of Kyungnam province, in South Korea. ${\check{O}}rumkol$ is good area to study talus. because it is characterized by following three geomorphic landscapes : free face surrounding ${\check{O}}rumkol$ ; ${\check{O}}rumkol$ with deep and wide valley floor ; lots of taluses typically developing within ${\check{O}}rumkol$. The main results can be summarized as follows: 1) The origin of ${\check{O}}rumkol$ may be suggested two assumptions : one is that its origin have been resulted from intrusion structure(intrusive rock might capture less resistant rock as tuff) ; the other is that its origin have been resulted from volcanic depression after intrusion or eruption. But these assumptions are not obvious. therefore more geological evidences will be supplemented after this 2) The characteristics of ${\check{O}}rumkol$ talus (1) Pattern ${\check{O}}rumkol$ taluses are tongue-shaped or cone-shaped in appearance. They are $50{\sim}200m$ in length and the range of the maximum width from 25 to 115m and one of their mean slope gradient from 32 to $36^{\circ}$ (2) Origin ${\check{O}}rumkol$ taluses have been formed under periglacial environment in the last glacial age and they are classified into rock fall talus type, considering in conjunction with the shape, hardness, sorting, weathering conditions of constituent debris. (3) The stage of landform development ${\check{O}}rumkol$ talus slope profiles are mainly concave slope. This concave slope type was eventually caused by talus creep at the lower end of the talus. That means new additions of debris from the free face have virtually ceased and there is no evidence of recent motion in the deposit. Now it is predominant that vegetation cover is gradually increasingly. Therefore ${\check{O}}rumkol$ taluses appear to be relict form stage. at present.

• Archives of design research
• /
• v.12 no.4
• /
• pp.294-303
• /
• 1999

With the breakthrough development of computing environment, the design phases have been changed a lot nowadays. In the case of prior phases of transportation design such as cars and forklift-trucks design, designers have depended on surveys and 2D line drawings for fixing a product layout and extracting ergonomic data. In this method, designers don't meet only the problem of reliability of measuring data but also, the problems of unknown situation of operators' fatigue and comfort in work situation. In these methods, it has much less creditability to have a 2D human model to check the real world motion due to the limitation of the 3 Dimension. Even though with a 2D human model, perfect layout is determined, it is still difficult to measure about comfort and fatigue for a user because it measuring an analysing method is static. The development of computer hardware and software have not only changed the flow in the social-wide range but also immerged design into Virtual Environment. In conventional design method, visualization and data transferring have been the main issues but, in virtual environment, determining of design layout and analysing ergonomic data with sophisticated feeling about comfort and fatigue are possible by using 3D virtual human. In this study, the general characteristics of virtual environment was discussed and the possibility of digital process of design was treated. For these studies, layout design for forklift-trucks was tested. Eventually, the merits of each design phase applied virtual environment are discussed.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.6
• /
• pp.680-688
• /
• 2018

Objective : To mitigate the risk of iatrogenic instability, new posterior decompression techniques able to preserve musculoskeletal structures have been introduced but never extensively investigated from a biomechanical point of view. This study was aimed to investigate the impact on spinal flexibility caused by a unilateral laminotomy for bilateral decompression, in comparison to the intact condition and a laminectomy with preservation of a bony bridge at the vertebral arch. Secondary aims were to investigate the biomechanical effects of two-level decompression and the quantification of the restoration of stability after posterior fixation. Methods : A universal spine tester was used to measure the flexibility of six L2-L5 human spine specimens in intact conditions and after decompression and fixation surgeries. An incremental damage protocol was applied : 1) unilateral laminotomy for bilateral decompression at L3-L4; 2) on three specimens, the unilateral laminotomy was extended to L4-L5; 3) laminectomy with preservation of a bony bridge at the vertebral arch (at L3-L4 in the first three specimens and at L4-L5 in the rest); and 4) pedicle screw fixation at the involved levels. Results : Unilateral laminotomy for bilateral decompression had a minor influence on the lumbar flexibility. In flexion-extension, the median range of motion increased by 8%. The bone-preserving laminectomy did not cause major changes in spinal flexibility. Two-level decompression approximately induced a twofold destabilization compared to the single-level treatment, with greater effect on the lower level. Posterior fixation reduced the flexibility to values lower than in the intact conditions in all cases. Conclusion : In vitro testing of human lumbar specimens revealed that unilateral laminotomy for bilateral decompression and bone-preserving laminectomy induced a minor destabilization at the operated level. In absence of other pathological factors (e.g., clinical instability, spondylolisthesis), both techniques appear to be safe from a biomechanical point of view.