• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.421-428
• /
• 2003

This study was conducted to determine the optimum blade shape for peeling Altari radish. To figure out the required peeling force according to various angles of blade and rakes of peeling cutter, two peeling tests such as circumferential peeling and longitudinal peeling of Altari radish were carried out. Based on the pretest results, which performed to investigate the applicability of the optimum shape of cutter and to find out the cutting pattern according to the lapse of days after harvesting the radish, the peeling depth and width of the blade were fixed at 2 mm and 10 mm. From two methods of circumferential and longitudinal peeling test, the angles of rake and blade as cutter shape factors were affected on peeling force. But the peeling speed was not affected on it under the safety speed as 0.2 m/s, without blade vibrating on peeling operation. The rake angle was more effective factor than the blade angle, and the optimum angles of blade and rake were 10$^{\circ}$ and 55$^{\circ}$ respectively. The cutting surface by the longitudinal peeling was more smooth than that by the circumferential peeling. There was no problem in peeling work during 4 days after harvest because the freshness of the Altari radish was maintained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.102-108
• /
• 2006

In this paper, we propose an interference cancellation(IC) scheme using a partial Rake(PRAKE) combining in ultra-wideband(UWB) multipath fading channels. In this IC scheme, differently from the conventional transmitter model, which employs a guard interval between each frame, the guard interval is employed between each slot for estimating the multiple access interference(MAI). The UWB systems using the proposed IC scheme have little performance degradation without regard to the number of user, while the conventional UWB systems have a significant performance degradation according to the number of user. In order to reduce the receiver complexity, the PRAKE combining of post-canceled signal and the partial user IC scheme are also proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.516-521
• /
• 2005

The application of UWB not only complies with the requirements of remote sensors system(ECG), it also contributes to the effectiveness of the implementations through its unique qualities such as ultra low transmission power - an important factor when dealing with biomedical equipment. In this paper, the aim is to replace the wired ECG sensors with a wireless link and design wireless UWB communication system. The various pulse shapes are presented that satisfies the FCC spectral mask and FCC part 15 rule. It is shown that UWB can be a high rate transmission over short ranges using Rake receiver, with the capability for reliably transmitting 100Mbps over distance at about 10 meters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1113-1120
• /
• 2003

It is expected in the future that the demand of optical subcarrier multiplexing system, in which a number of small size base stations with only antenna and RF transmission are connected to central station using optical fiber, will be increased in the CDMA digital cellular mobile communication network. In this paper, in order to analysis the performance of optical SCM system fur CDMA RF signal transmission, MZ modulator is modelled as a non-linear transfer function with cubic operation. The performance degradation due to multipath signals and other user signals through MB modulator is analyzed and the performance is improved using the Rake receiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.589-599
• /
• 1997

In this paper a decision feedback multiuser receiver which rejects multiuser interference is designed in synchronous CDMA systems. Multiuser interference rejection is achieved by decision feedback from the output of a matched filter bank in case of AWGN channels and PAKE receiver bank in case of fading channels. The coefficients of the decision feedback structure are adapted by the Least Mean Square(LMS) algorithm. Simulation results show that the decision feedback multiuser receiver has better performance than the conventional receiver.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.3
• /
• pp.241-255
• /
• 2012

Three types of 100 kW-class tidal stream turbines are proposed and their performance is studied both numerically and experimentally. Following a wind turbine design procedure, a base blade is derived and two additional blades are newly designed focusing more on efficiency and cavitation. For the three designed turbines, a CFD is performed by using FLUENT. The calculations predict that the newly designed turbines perform better than the base turbine and the tip vortex can be reduced with additional efficiency increase by adopting a tip rake. The performance of the turbines is tested in a towing tank with 700 mm models. The scale problem is carefully investigated and the measurements are compared with the CFD results. All the prediction from the CFD is supported by the model experiment with some quantitative discrepancy. The maximum efficiencies are 0.49 (CFD) and 0.45 (experiment) at TSR 5.17 for the turbine with a tip rake.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.

• English & American cultural studies
• /
• v.14 no.1
• /
• pp.193-218
• /
• 2014

This essay explores Congreve's last play The way of the World in terms of English new identity of the gentry represented by Mirabell in political, social and historical context of the Bloodless Revolution. Particularly, this essay focuses on behavioral differences between Mirabell and Fainall as characters who manage a certain type of acceptable Englishness through their heir. The acceptable Englishness separates what the differences are between two rakes from the outside of normative principle. The Way of the World reflects Lockean republican ideology in personal and familial relationships. Mirabell as a heroic rake represents new expectations for Englishmen who rejects absolute sovereign contrasted by Fainall's foreign tyrannical ways of domesticity. The Foreignness of Fainall's in the play is displaced by corollary change in the new model of English identity exemplified by Mirabell. Through the play, Congreve tends to satirize repressive morality of Hobbesian extremism and emphasizes the Revolution settlement based on consent sand trust instead. Mirabell's normative will harmonizes individual desire for happiness with social demand. In a sense Congreve's The Way of the World is a play reaching typical Restoration ending of intrigue and conspiracy through two rakes's interaction. Accordingly, this essay tries to show what separates the heroic rake from tyrannical libertine through their way of love, money, compromise and negotiation, which is their way of life.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.34-41
• /
• 2002

In the conventional rake receiver structure for the IS-95 CDMA system, each finger has its own time-deskew buffer or FIFO that aligns the multipath signals to the same timing reference in order to combine symbols. This architecture is not a burden to the rake receiver design mainly because of the small number and size of the buffers. However, the number and size of the buffers are significantly increased in the cdma2000 system which adopts multiple carriers and the small spreading gain for a higher rate in data services. In order to decrease the number of buffers, we propose a new model of the time-deskew buffers, which combines the symbols as well as realigns them at the same time. Our architecture reduces the hardware complexity of the buffers by about more than 60% and 70% compared with the conventional one when we consider each rake receiver has three and four independent fingers, respectively. Moreover, the proposed algorithm is very useful not only to the cdma2000 rake receiver but also to the receiver with many fingers in order to increase the BER performance.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.