• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.418-426
• /
• 2008

The objectives of this study were to examine the properties of fluoride-releasing resin composite restorative materials. Four commercially available compomer materials (Compoglass F: CF, $Dyract^{(R)}$ AP: DA, $Dyract^{(R)}$ flow: DF, F2000: FT) and one fluoride-releasing composite resin ($Tetric^{(R)}$ Ceram: TC) were selected as experimental materials. Rectangular-shaped tensile test specimens were fabricated in a teflon mold giving 5mm in gauge length and 2mm in thickness. Disk-shaped specimens were fabricated in the split teflon mold with diameter of 15mm and thickness of 1mm. After curing for an hour, specimens were immersed in deionized water at $37^{\circ}C{\pm}1^{\circ}C$ for 30 days. All specimens were thermocycled for 10,000 cycles with 15 seconds of dwelling time in each $5^{\circ}C$ and $55^{\circ}C$ water baths. Toothbrush abrasion test was conducted under a load of 1.5 N and the abraded surfaces were examined with surface roughness tester (SV-3000, Mitutoyo Co, Japan) and SEM (JSM-5800, JEOL, Japan). Fluoride recharging was done by toothbrushing for 3 min. using a fluoride toothpaste (Perio Alpine Herb, LG Household & Health Care, Korea). The results obtained were summarized as follows; 1. The highest tensile strength value of 32.3 MPa was observed in TC group and the lowest value of 16.8 MPa was observed in CF group. The tensile strength of TC group was significantly higher than those of CF and DF groups (P<0.05). 2. The lowest Ra value of 0.287 was observed in TC group and the highest value of 1.516 was observed in FT group. The Ra value of FT group was significantly higher than other groups (P<0.05). 3. The abraded surfaces revealed the increase of surface roughness due to the protrusion and missing of filler particles. 4. The release of fluoride of compomers after tooth brushing by Perio Alpine Herb was initially large and then followed by small and continuously. But it remains small and constant in fluoride-releasing composite resin of TC. 5. The highest value of fluoride release after toothbrushing by Perio Alpine Herb was $2.064{\mu}g/cm^2$ in CF group and the lowest value was $0.1119{\mu}g/cm^2$ in TC group. The amount of fluoride release of CF group was significantly higher than other groups (P<0.05).

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1122-1129
• /
• 2001

Underwater wet arc welding process was experimentally investigated by using the six types of flux coated electrodes of 3.2 mm diameter and the KR-RA steel plate of 11 mm thickness as base metal. Two types of electrodes were domestic covered arc welding electrode(CR13, CR14) and another two types of wet welding electrodes(UWCS, TN20)were imported goods, and the other two type (UWX1, UWX2) were individually designed flux coated electrodes for experimental welding purpose. Main experimental results are summerized as follows: 1. It is ascertained that individually designed flux coated electrode(UWX1) could be used in practice with KR-RA steel plate for underwater wet arc bead welds. 2. Welding arc can be generated easily and considerably kept in stable using TN20 and UWX1 electrodes. 3. The micro Vickers hardness value and the portion of martensite in the HAZ were increased in all the electrodes by rapid cooling rate, but it is relatively maintain stable for UWCS, TN20 and UWX1 electrodes.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.37-47
• /
• 1990

In accordance with the high precision of mechanical elements, it has been required to high precision in surface roughness measurement and, therefore, stylus tip radius is manufa- ctured less than 2 .mu. m through ion sputter machining. In this experiment, by suing ion sputter machined stylus pf fine tip, radius and lapping machined stylus, surface roughness of standard specimens, silicon wafer were measured and then Rmax, Ra, RMS value were investi- gatedaccording to the variation of tip radius of stylus. As a result, measuring error due to the variation of stylus tip radius in surface roughness measurement was decreased by using ion sputter machined stylus and also the measuring accuracy was improved. And the measuring variation of Ra, RMS calculated from correlation coefficient lager than 0.9 on the wave of short period and amplitude using ion sputter machined stylus of fine tip radius.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.119-124
• /
• 2017

Machining optimization using typical computer-aided manufacturing (CAM) software mainly depends on tool paths, and it is impossible to predict the behavior of material or cutting force. In this paper, cutting force analysis simulation is performed on the Unibody Case of a mobile phone with the aim of optimizing cutting-force-based machining using the Third Wave Systems' AdventEdge Production Module. Machining time after optimization was shortened by 42% for roughing compared to pre-optimization, and actual machining time was reduced by 36.8%. For finishing, machining time was reduced by 92%, and actual machining time was reduced around 90%. A surface roughness analysis found that the post-optimization surface roughness was $1.16{\mu}m$ Ra, compared to a pre-optimization value of $1.75{\mu}m$ Ra.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.3
• /
• pp.183-189
• /
• 2005

The effects of duplex-treatment of plasma carburization and CrN coating onto Ti-6Al-4V alloy on its creep properties were investigated by means of a constant stress creep tester. Applying duplex-treatment, specimens having an inner carburized layer of about $150{\mu}m$ in depth and outer CrN layer of about $7.5{\mu}m$ in thickness were prepared. The hardness of duplex-treatment surface was about 1,960 VHN. It also appeared that the duplex-treatment improved the roughness of the surface significantly; $Ra=0.045{\mu}m$ for treated alloy while $Ra=0.321{\mu}m$ for untreated alloy. The steady-state creep behaviors were investigated in a temperature range of $510{\sim}550^{\circ}C$ ($0.42{\sim}0.44T_m$) under an applied stress range of 200~275 MPa. The stress exponent, n, was derived assuming the power law creep behavior. The surface treatment showed a decrease in a value from 9.32 (untreated) to 8.79 (treated). Also the activation energy obtained from an Arrhenius plot increased from 238 to 257 kJ/mol.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.312-315
• /
• 2011

The effect of slurry composition and wafer flatness on a material removal rate (MRR) and resulting surface roughness which are evaluation parameters to determine the CMP characteristics of the on-axis 6H-SiC substrate were systematically investigated. 2-inch SiC wafers were fabricated from the ingot grown by a conventional physical vapor transport (PVT) method were used for this study. The SiC substrate after the CMP process using slurry added oxidizers into slurry consisted of KOH-based colloidal silica and nano-size diamond particle exhibited the significant MRR value and a fine surface without any surface damages. SiC wafers with high bow value after the CMP process exhibited large variation in surface roughness value compared to wafer with low bow value. The CMPprocessed SiC wafer having a low bow value of 1im was observed to result in the Root-mean-square height (RMS) value of 2.747 A and the mean height (Ra) value of 2.147 A.

• Journal of Distribution Science
• /
• v.14 no.9
• /
• pp.133-147
• /
• 2016

Purpose - The Purpose of this study is to observe the value of LOHAS as an exhibition that is perceived to be a specialized local exhibition with good fame and differentiated advantage as well as the spectators' will to visit the exhibition coming from the future behavior intention of visitors. Research design, data, and methodology - In order to achieve the purpose of this study, This study organized questionnaire after setting a hypothesis based on the theoretical background from the parameters. verification of the hypothesis by statistically analyzing the answers for questionnaire follows. Finally, the implication of this study is drawn through comprehensive discussion while This study indicated from the limits of the study and future direction for research. This study set up a model to research the influence on the structuring factors in LOHAS exhibition in forming perceived value, customer satisfaction and future behavior intention. Frequency analysis was used for getting demographic characteristics, verification of plausibility, reliability of measured parameters and factors analysis. This study have performed verification of difference at selection property level based on multiple regression analysis and demographic nature. Results - To summarize the study result, through the verification of hypothesis about meaningful influence among structuring factors in LOHAS exhibition, perceived value and customer satisfaction shows some noticeable points to focus on. That is, it is established things that partial adoption and meaning relationship of partial influence. The perceived value affected both customer satisfaction and future behavior intention meaningfully. Conclusions - This study could note that in the structuring factors of LOHAS exhibition, perceived value for visitors and customer satisfaction play their roles positively on the future behavior intention. In conclusion, this study implies that strategic measures are necessary to fulfill the structuring factors of LOHAS exhibition as they would make positive impact on acknowledged value, customer satisfaction and future behavior intention to contribute to the growth and development of LOHAS exhibition. Also it suggests that the method to join each other with activities is necessary to strengthen the properties of the exhibition and position well to be a solid local exhibition.

• Journal of The Korean Association of Information Education
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2012

The purpose of this study was to investigate how task value, twitter self-efficacy, and social presence affect learning satisfaction on twitter discussion. In addition, this study examined the mediating effects of social presence. Participants were 46 undergraduate students in A university in Seoul, Korea. They responded the following surveys: task value, twitter self-efficacy, social presence, and learning satisfaction. Baron & Kenny (1986)'s mediation analysis approach with correlation and multiple regression analyses were applied to this study. Findings showed the significant effects of task value, twitter self-efficacy, and social presence on satisfaction on twitter discussion. In addition, social presence mediated task value, twitter self-efficacy, and satisfaction. These results suggest that the twitter discussion should be designed to accommodate different learners characteristics such as task value and twitter self-efficacy and promote greater social presence between learners.

• Journal of the Korean Dietetic Association
• /
• v.11 no.3
• /
• pp.353-364
• /
• 2005

The informations concerning knowledge, value and consumption pattern for rice foods of elementary schoolchildren (630 boys and 550 girls in 5th or 6th grade) were investigated in Changwon and Gimhae of Gyeongnam province. They were asked based on knowledge, one’s value and intake frequence of rice foods by questionnaries. Menus for 3 days including 2 weekdays and 1 weekend day were taken from 136 students (77 boys and 59 girls) in two Elementary Schools in Changwon and Gimhae to know intake reality of rice product. The purpose of this survey was to find the way of encouraging rice intake and preference which now seemed to be low because of simplified, westernized eating habits, and to provide basic information needed for inheriting and improving our traditional cooked rice centered eating culture. The results are summarized as follows. The knowledge of rice was positively correlated to the one’s value (r=0.365, p<0.001) and the preference (r=0.132, p<0.001), the one’s value was positively correlated to preference (r=0.409, p<0.001). The score of knowledge for rice was 12.8 points out of 20, the girls get points(13.12) significantly higher than the boys (12.53) (p<0.01). One's value about rice foods was 37.35 points out of 50 what is relatively high. They have eaten cooked rice type food for 2.24 times per day. Both boys and girls in Changwon and Gimhae area were having cooked rice type food significantly more during weekdays compared to weekends (p<0.001) by 3 days food record. According the results, we can see the possibility that schoolchildren can be encouraged to eat more rice foods by nutritional education to go with the development of various programs.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1925-1931
• /
• 2024

The study conducted in the northwest region of Jordan aimed to assess the levels of natural radioactivity in soil and olive mill pomace (OMP) samples. The researchers used Nal (TI) gamma-ray spectrometry to measure the activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the samples. The average activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the soil samples were found to be 18.624 ± 5.82, 12.276 ± 5.728, 518.33 ± 212.57, and 0.140 ± 0.09 (Bq, kg^-1), respectively. In the OMP samples, the average activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were 7.272 ± 4.386, 3.454 ± 1.503, and 169.997 ± 81.873 (Bq kg^-1), respectively, and no ¹³⁷Cs was detected. The study also investigated fundamental parameters associated with radon, specifically the radon emanation coefficient (Rn_EC) and radon mass exhalation rate (E_x). The Rn_EC values ranged from 0.621 to 0.78 (Bq kg^-1), with an average value of 0.71 ± 0.06 (Bq kg^-1). The estimated E_x from the soil samples ranged from 65.83 to 124.86 (mBq kg^-1h^-1), with an average value of 99.74 ± 21.73 (mBq kg^-1h^-1). Regarding radiological hazards, the study examined various parameters, including radium equivalent activity, external and internal hazard indices, gamma and alpha indices, absorbed gamma dose rate, and excess lifetime cancer risk. All of these assessed values were found to be below the worldwide recommended limits for radiological safety. Additionally, the study analyzed the concentrations of gross alpha and gross beta radioactivities in soil and OMP samples. The soil samples had an average gross alpha activity of 4.642 ± 1.04 (Bq kg^-1) and an average gross beta activity of 48.13 ± 14.50 (Bq kg^-1). The OMP samples showed an average gross alpha activity of 0.32 ± 0.27 (Bq kg^-1) and an average gross beta activity of 59.19 ± 12.94 (Bq kg^-1). Overall, the obtained results are crucial for evaluating the radiological risks associated with natural radioactivity in the northwest region of Jordan. The findings establish baseline data for comparison and reference for radioactivity levels in the environment.