• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric BLT($Bi_{4-x}$La$_{x}$Ti$_3$O$_{12}$) is a promising candidate materials. This study was Practiced to make good conditions of BLT targets. In this study, calcination and sintering temperature were kept at 75$0^{\circ}C$, 110$0^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, 7.877 g/㎤ as La$_2$O$_3$ contents were 0.0mol%, 0.25mo1%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon$$_{r}$-f relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of La$_2$O$_3$ was observed like rod and plate types.types.s.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.427-427
• /
• 2012

Cu(In,Ga)$Se_2 $ (CIGS) 박막 태양전지는 높은 효율과 낮은 생산 단가로 인해 많은 연구가 이루어지고 있다. 특히, Se flux는 박막의 특성에 가장 중요한 CIGS의 결정성, 결정립 크기, 결정방향을 형성하는데 영향을 주는 것으로 알려져 있다. 일반적인 co-evaporation에 사용되는 Se effusion cell의 경우, 높은 분자가를 가지는 Se 분자들이 공급되기 때문에 낮은 반응성을 보이지만 Se cracker cell을 사용할 경우 Se 분자들이 열적으로 크래킹되어 낮은 분자가를 가지므로 화학적으로 높은 반응성을 가진다. 따라서 적은 양의 Se으로도 양질의 CIGS 박막 제작이 가능하다. 본 연구에서는 Se effusion cell과 cracker cell을 이용하여 CIGS 광흡수층을 제작하였으며, 각각 제작된 CIGS 박막의 특성을 비교하였다. 또한 Se cracker cell의 reservoir zone(R-zone) 온도를 통해 Se flux를 변화시켜 Se flux에 따른 CIGS 박막 태양전지의 특성에 대해 알아보았다. SEM, EDS, XRD 측정을 통해 박막의 특성을 분석하였고, J-V 측정을 통해 태양전지의 특성에 대해 알아보았다. Se cracker를 사용하여 제작된 CIGS 박막의 결정립 크기가 effusion cell로 제작된 박막보다 더 크게 나타났고, Se flux가 증가할수록 결정립의 크기는 증가하였다. Se cracker의 flux가 $0.17{\'{{\AA}}}$/s일 때 반사방지막 없이 13.14%의 효율을 나타내었다.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.243-248
• /
• 2009

Carbon-coated Cu nanopowders with core/shell structure have been successfully fabricated by pulsed wire evaporation (PWE) method, in which a mixed gas of Ar/$CH_4$ (10 vol.%) was used as an ambient gas. The characterization of the samples was carried out using x-ray diffraction (XRD), scanning electron microscope (SEM), and high resolution transmission electron microscope (HRTEM). It was found that the nanoparticles show a spherical morphology with the size ranging of 10-40 nm and are covered with graphite layers of 2-4 nm. When oxygen-passivated Cu nanopowders were annealed under flowing argon gas (600 and 800$^{\circ}C$), the crystallinity of $Cu_2O$ phase and the particle size gradually increased. On the other hand, carbon-coated Cu nanopowders remained similar to as-prepared case with no additional oxide or carbide phases even after the annealing, indicating that the metal nanoparticles are well protected by the carbon-coating layers.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.770-778
• /
• 2013

In this study, a liquid carbonation method was applied for producing precipitate calcium carbonate by liquid-liquid reaction. We recycled the recycling water of ready-mixed concrete, one of construction waste for use source of carbonate ion. A supernatant separated from the recycling water of ready-mixed concrete, as a result of ICP analysis of a cation, $Ca^{2+}$ was contained up to 1100 ppm. We used MEA as a $CO_2$ absorbent for the liquid carbonation. A precipitate $CaCO_3$ was produced at more than MEA 20 wt%. The precipitate $CaCO_3$ as a final product was separated and dried. The result of XRD was confirmed the generation of $CaCO_3$ to calcite structure.

• Korean Chemical Engineering Research
• /
• 제52권2호
• /
• pp.166-174
• /
• 2014

본 연구에서는 점화제로 사용되는 $B-KNO_3$의 가속노화 실험에 따른 특성변화를 고찰하였다. 점화제는 보관 방법이나 보관기간에 따라 점화 효율이 저하되는 경향이 있으며 안정된 사용을 위해서는 이에 대한 명확한 이해가 필요하다. 따라서 노화에 대한 원인 규명을 위해 가속화 시험 시편의 미세구조와 결정구조 및 열분석을 수행하였으며 점화 특성에 끼치는 영향성을 규명하고자 하였다. 산화제로 첨가된 $KNO_3$의 결정구조를 분석함으로써 노화에 끼치는 산화제 영향을 해석하였다. 결론적으로 산화제의 결정구조가 안정한 구조로 변화되었으며 활성화 에너지변화에 영향을 끼쳤다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1439-1441
• /
• 2001

In this paper, the piezoelectric and dielectric properties as a function of x and r in $yPbZr_xTi_{1-x}O_3-(1-y)Pb(Mn_{1/3}Nb_{2/3})O_3$ piezoelectric ceramics is investigated. As a results, when y is 0.95 and x is 0.505, electromechanical coupling factor($k_p$), permittivity(${{\varepsilon}_{33}}^T/{\varepsilon}_0$), piezoelectric strain constant($d_{33}$) and mechanical quality factor($Q_m$) are 58[%], 1520, 272 [pC/N] and 1550, respectively. From XRD analysis, when x is 0.505, it is MPB which present rhombohedral and tetragonal phase in same quantity. Also, From SEM observation. when sintering temperature is 1150[$^{\circ}C$], grain size is about 2 [${\mu}m$]. As y decreases, piezoelectric and dielectric properties and curie temperature decreases, but mechanical quality factor and sintering temperature increases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.270-270
• /
• 2010

OLED device is one of the most attractive and alternative display components, which stems primarily from the self-emission, large intrinsic viewing angle, and fast switching speed. However, because of its relatively short history of development, much remains to be studied in terms of its basic device physics, manufacturing processes, and reliability etc. Especially among several issues, it should be noted that the device characteristics are very sensitive to the surface properties of transparent conducting oxide (TCO) electrode materials. In this study, we have investigated the performance of OLED devices as a function of sheet resistance and surface roughness of TCO thin films. For this purpose, ITO and IZO thin films were deposited by r. f. magnetron sputtering under various ambient gases (Ar, Ar+O2 and Ar+H2, respectively). The crystal structure and surface morphology were examined by using XRD and FESEM. Also, electrical and optical properties were Investigated.

• 한국표면공학회지
• /
• 제38권6호
• /
• pp.227-233
• /
• 2005

Electrochemical characteristics of welded stainless steels containing Ti have been studied by using the electrochemical techniques in 0.5 M $H_2SO_4$+0.01 M KSCN solutions at $25^{\circ}C$. Stainless steels with 12 mm thick-ness containing $0.2{\~}0.9 wt\%$ Ti were fabricated with vacuum melting and following rolling process. The stainless steels were solutionized for 1hr at $1050^{\circ}C$ and welded by MIG method. Samples were individually prepared with welded zone, heat affected zone, and matrix for intergranular corrosion and pitting test. Optical microscope, XRD and SEM are used for analysing microstructure, surface and corrosion morphology of the stainless steels. The welded zone of the stainless steel with lower Ti content have shown dendrite structure mixed with $\gamma$ and $\delta$ phase. The Cr-carbides were precipitated at twin and grain boundary in heat affected zone of the steel and also the matrix had the typical solutionized structure. The result of electrochemical measurements showed that the corrosion potential of welded stainless steel were Increased with higher Ti content. On the other hand, reactivation($I_r$), passivation and active current($I_a$) density were decreased with higher Ti content. In the case of lower Ti content, the corrosion attack of welded stainless steel was remarkably occurred along intergranular boundary and ${\gamma}/{\delta}$ phase boundary in heat affected zone.

• Advances in nano research
• /
• 제4권3호
• /
• pp.181-195
• /
• 2016

Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.

• 자원리싸이클링
• /
• 제6권1호
• /
• pp.35-39
• /
• 1997

EAF Dust 중 염화물의 존재형태를 파악하고, 온도에 따른 휘발 거동과 제거에 관하여 알아보기 위해 실험을 하였다. 두시료의 화학성분은 더스트A의 경우 27.3%FE, 21.8%Zn, 3.15%Pb, 3.51%Cl이고 더스트B의 경우 33.92%FE, 15.94%Zn, 2.73%Pb, 3.98%Cl를 함유하다. EAF Dust 중 염화물의 존재형태를 X선회절분석과 수침출을 통해 분석한 결과 염화물의 존재형태는 NaCl, KCl, Ph(OH)Cl로서 주로 존재함을 알았다. 온도에 따른 Chlorine의 휘발율을 산화성분위기와 환원성분위기에서 살펴본 결과, 각각 110$0^{\circ}C$에서 1시간 유지하였을 경우 산화성분위기에서는 99%까지, 환원성분위기에서는 96%까지 휘발제거되었다.