• Korean Journal of Animal Reproduction
• /
• v.3 no.1
• /
• pp.36-40
• /
• 1979

This experiment was conducted to separate X-and Y-bearing spermatozoa of boar semen. The ratio of X-and Y-bearing spermatozoa to total spermatozoa included in ejaculated semen obtained from 4 boars raising at the College of Agriculture, Seoul National University and treated by the sedimentory or electrophoretic technique was estimated. For the electrophoresis, the semen specimen was placed into the co, pp.r loop electrodes in 30cc of glass tube at room temperature for 30 minutes and in order to sedimentary separation, the semen was sedimented in 5$^{\circ}C$ water for 50 minutes. The sperm fluorescent stainning technique was performed by the method of Bhattacharya etal (1976). The results obtained were as follows; 1. Average rate of B-body bearing spermatozoa in normal boar semen was 45.15${\pm}$4.20%, and no significant difference was observed between 1st (44.88${\pm}$6.41%) and 2nd (42.75${\pm}$4.17%) fraction of fractionally collected semen. 2. Spermatozoa were separated into several different fractions by sedimentation. B-body a, pp.arances from the top and bottom fraction were 53.70% and 33.43%, respectively. There were highly significant difference between the top and bottom fractions. 3. The swine spermatozoa were separated into X-and Y-bearing spermatozos by electrophoresis without interferring the sperm motility. The rates of B-body bearing spermatozoa attracted on the anode and cathode were 60.4% and 21.8%, respectively. Highly significant difference betwee two fractions was also observed.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.91-102
• /
• 1999

The paper describes a robust adaptive control algorithm for induction motor drive without speed sensor at low speed range. The control algorithm use only current sensors in a space vector pulse width modulation within loop control with rotor speed estimation and voltage source inverter. On-line rotor speed estimation is based on utilizing parallel model reference adaptive control system. MRAC of the modified flux model for flux and rotor speed estimator uses dual-adaptation mechanism, ${\omega}_r$ and ${\omega}_e$ scheme. The estimated flux components in the model can be compensated from the effects of offset errors on pure integrals. It can be compensated to the parameter variations and torque fluctuation with speed estimation in less then 10 rad/sec. In a simulation, the proposed induction motor control algorithm without speed sensor at very low speed range are shown to operate very well in spite of variable rotor time constant and fluctuating load without change the controller parameters. The suggested control strategy and estimation method have been validated by simulation study, and it proposed the designed system for the implementation using TI320C31 DSP/ASIC controller.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.136-139
• /
• 1999

The post-annealing treatments on RF (Radio Frequency) magnetron sputtered PZI(Pb$\_$1.05/(Zr$\_$0.52/, Ti$\_$0.48/)O$_3$thin films(4000${\AA}$) have been investigated. for a structure of PZT/Pt/Ti/SiO$_2$/Si Crystallization pproperties of PZT films were strongly dependent on RTA(Rapid Thermal Annealing) annealing temperature. We were able to obtain a perovskite structure of PZT at a low temperature of 600$^{\circ}C$. P-E curves of Pd/PZT/Pt capacitor annealed at 700$^{\circ}C$ demonstrate typical hysteresis loops. The measured values of P$\_$r/, E$\_$c/, by post annealed at 700$^{\circ}C$ were 12.1 ${\mu}$C/$\textrm{cm}^2$, 120KV/cm respectively.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2007.11a
• /
• pp.129-139
• /
• 2007

Many modalities of treatment for acquired skin hyperpigmentation are available including chemical agents or physical therapies, but none are completely satisfactory. The ideal depigmenting compound should have a potent. rapid and selective bleaching effect on hyperactivated melanocytes, carry no short- or long-term side-effects and lead to a permanent removal of undesired pigment. acting at one or more steps of the pigmentation process. Depigmentation can be achieved by regulating (i) the transcription and activity of tyrosinase, tyrosinase related protein-1 (TRP-1), tyrosinase related protein-2 (TRP-2), and/or peroxidase; (ii) the uptake and distribution of melanosomes in recipient keratinocytes and (iii) melanin and melanosome degradation and turnover of pigmented keratinocytes. One of the interesting point for development of skin whitening agent is Mitf(Microphthalmia-associated transcription factor). Mitf belongs to the basic helix-loop-helix-zip family of trabscription factors and it is crucial as it regulates both melanocyte proliferation as well as melanogenesis and is the major regulator of tyrosinase and the related enzymes (TRPs), as well as many melanosome structural proteins such as pMel17. Recently, we developed MITF-down-regulating agents from natural and synthetic sources, which have anti-melanogenic effect on in vitro and in vivo. We suggested that potent MITF-down regulating agents might be used for skin whitening cosmeceuticals.

• Advances in Energy Research
• /
• v.3 no.2
• /
• pp.81-95
• /
• 2015

Microgrid, which can be considered as an integration of various dispersed resources (DRs), is characterized by number of DRs interfaced through the power electronics converters. The microgrid comprising these DRs is often operated in an islanded mode. To minimize the cost, reduce complexity and increase reliability, it is preferred to avoid any communication channel between them. Consequently, the droop control method is traditionally adopted to distribute active and reactive power among the DRs operating in parallel. However, the accuracy of distribution of active and reactive power among the DRs controlled by the conventional droop control approach is highly dependent on the value of line impedance, R/X i.e., resistance to reactance ratio of the line, voltage setting of inverters etc. The limitations of the conventional droop control approach are demonstrated and a modified droop control approach to reduce the effect of impedance mis-match and improve the time response is proposed. The error in reactive power sharing is minimized by inserting virtual impedance in line with the inverters to remove the mis-match in impedance. The improved time response is achieved by modifying the real-power frequency droop using arctan function. Simulations results are presented to validate the effectiveness of the control approach.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.95-105
• /
• 2015

Manufacturing Execution System(MES) is in charge of manufacturing execution in the shop floor based on the inputs given by high level information such as ERP, etc. The typical MES implemented is not tightly interconnected with shop floor control system including real (or near real) time monitoring and control devices such as PLC. The lack of real-time interfaces is one of the major obstacles to achieve accurate and optimization of the total performance index of the shop floor system. Smart factory system in the paradigm of Industry 4.0 tries to solve the problems via CPS (Cyber Physical System) technology and FILS (Factory In-the-Loop System). In this paper, we conducted Systems Engineering Approach to design an advanced MES (namely Smart MES) that can accommodate CPS and FILS concept. Specifically, we tailored Systems Engineering Process (SEP) based on an International Standard formalized as ISO/IEC 15288 to develop Stakeholders' Requirements (StR), System Requirements (SyR). The deliverables of each process are modeled and represented by the SysML, UML customized to Systems Engineering. The results of the research can provide a conceptual framework for future MES that can play a crucial role in the Smart Factory.

• Nuclear Engineering and Technology
• /
• v.42 no.2
• /
• pp.203-210
• /
• 2010

The $\underline{H}igh$ flux $\underline{A}dvanced$ $\underline{N}eutron$ $\underline{A}pplication$ $\underline{R}eact\underline{O}r$ (HANARO), an open-tank-in-pool type reactor, is one of the multi-purpose research reactors in the world. Since the commencement of HANARO's operations in 1995, a significant number of experimental facilities have been developed and installed at HANARO, and continued efforts to develop more facilities are in progress. Owing to the stable operation of the reactor and its frequent utilization, more experimental facilities are being continuously added to satisfy various fields of study and diverse applications. The irradiation testing equipment for nuclear fuels and materials at HANARO can be classified into capsules and the Fuel Test Loop (FTL). Capsules for irradiation tests of nuclear fuels in HANARO have been developed for use under the dry conditions of the coolant and materials at HANARO and are now successfully utilized to perform irradiation tests. The FTL can be used to conduct irradiation testing of a nuclear fuel under the operating conditions of commercial nuclear power plants. During irradiation tests conducted using these capsules in HANARO, instruments such as the thermocouple, Linear Variable Differential Transformer (LVDT), small heater, Fluence Monitor (F/M) and Self-Powered Neutron Detector (SPND) are used to measure various characteristics of the nuclear fuel and irradiated material. This paper describes not only the status of HANARO and the status and perspective of irradiation devices and instrumentation for carrying out nuclear fuel and material tests in HANARO but also some results from instrumentation during irradiation tests.

• Earthquakes and Structures
• /
• v.23 no.2
• /
• pp.129-138
• /
• 2022

One of the objectives to prevent building pounding between two adjacentstructures is to considerseparation distance or decrease relative displacement during seismic excitation. Although the majority of building codes around the world have basically suggested some equations or approximately recommended various distances between structuresto avoid pounding hazard, but a lot of reportsin zone of pounding have obviously shown thatsafety situation or economic consideration are not always provided due to the collisions between buildings and the cost of land, respectively. For this purpose, a dynamic MDOF model by having base isolation system is numerically considered and using various earthquake records, relative displacements are mathematically investigated. Different equations to determine the value of damping ratio are collected and the results of evaluations are listed for comparison among them to present a new equation for determination of impact damping ratio. Presented equation is depends significantly on impact velocity before and after impact based on artificial neural network, which the accuracy of them is investigated and also confirmed. In order to select the optimum equation, hysteresisloop of impact between base of building and rubber bumper is considered and compared with the hysteresis loop of each impact, calculated by different equations. Finally, using representative equation, the effect of thickness, number and stiffness of rubber bumpers are numerically investigated. The results of analysis indicate that stiffness and number of bumpers have significantly affected in zone of impact force while the thickness of bumpers have not shown significant influence to calculate impact force during earthquake. For instance, increasing the number of bumpers, gap size between structures and also the value of stiffness is caused to decrease impact force between models. The final evaluation demonstrates that bumpers are able to decrease peak lateral displacement of top story during impact.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.519-526
• /
• 1996

A 2D-LDV system was employed to investigate the flow field characteristics in fully developed drag reducing turbulent channel flows. The additive used in this study was Habon-G which showed splendid drag reduction effect and minimum mechanical degradation trend in the closed flow circulation loop. In order to have better understanding of the drag reduction mechanism, the instantaneous velocities were carefully measured under various experimental conditions and the flow characteristics including time-averaged velocity, turbulent intensity and Reynolds shear stresses were carefully assessed. The time-averaged velocity profiles of surfactant flows showed more parabolic shape(typically shown in a laminar flow) together with significant suppression of turbulent production, yielding the shear induced micelle structure orienting in the flow direction due to its isotropic characteristics. Especially it was observed that the maximum intensity for drag reducing flows was shifted away from the wall and that the streamwise and normal turbulent intensities were strongly altered. This phenomenon strongly suggests that the viscous sublayer becomes thicker with addition of surfactant. Turbulent momentum transport was drastically suppressed across the whole drag reducing channel flow.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.520-525
• /
• 2003

Fast Breeder Test Reactor (FBTR) is a 40MW (thermal) / 13.2MW (electrical), Plutonium - Uranium mixed carbide fuelled, sodium cooled, loop type nuclear reactor operating at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam. Its main aim is to generate experience in operation of fast reactors and sodium systems and to serve as an irradiation facility for development of fuels and structural materials fur fast reactors. Nuclear reactors pose difficulties to the NDT techniques used to monitor the conditions of the internal components. Sodium cooled fast breeder reactors have their own typical difficulties in using the NDT techniques. These are due to the need for operation in aggressive environment of nuclear radiation and sodium (molten/vapour), as well as the need to maintain leak tightness of a very high order during all states of reactor operation and shutdown for fuel handling, maintenance and remote inspection. This paper discusses the following NDT techniques, which have been successfully used for the past 15 years in FBTR: (i) Periscope and Projector, (ii) Core Co-ordinate Measuring Device and, (iii) Optical fiberscope. The inspection using these techniques have given confidence for further reactor operation at high power by giving useful data on the conditions of the components inside the reactor vessel.