• Perspectives in Nursing Science
• /
• v.12 no.1
• /
• pp.50-59
• /
• 2015

Purpose: The purpose of this study was to investigate the influencing factors on the quality of life of elders. Methods: Data were collected from August 25, September 1, 2014, and participants were 300 elders who were using senior welfare centers. Descriptive statistics, t-test, one-way ANOVA, Pearson correlation coefficient, and stepwise multiple regression were used for data analysis. Results: Elders who were more painful, highly perceived health status, self-esteem and social support, and lower depression showed relatively higher quality of life. Also, there were strong correlations between quality of life and depression (r=-.737) /perceived health status (r=.709). Factors predicted quality of life of elders were perceived health status (${\beta}=.349$), depression (${\beta}=-.267$), social support (${\beta}=.172$), self-esteem (${\beta}=.170$), pain (${\beta}=-.130$), income (${\beta}=.113$), and level of education (${\beta}=.064$). These 7 factors explained 78.2% of the variance in quality of life of elders (F=154.49, p<.001). Conclusion: Therefore, in order to improve the quality of life of elders, a systematic approach is necessary through multilateral cooperation among comprehensive sectors.

• The Korean Journal of Zoology
• /
• v.27 no.4
• /
• pp.213-220
• /
• 1984

The frequencies of finger print patterns and the pattern intensity index among 2, 925 Koreans (804 males, 2, 121 females) are analyzed. Total finger ridge counts was calculated for 776 Koreans (426 males and 350 females). Comparisons are made with results among other racial populations in a review of the literature. Certain differences exist between males and females in both qualitative (finger print pattern) and quantitative (total ridge count) dermatoglyphic traits. Males have higher frequences of whorls (53.6% for males, 45.7% for females), and radial loops (2.9% for males, 2.2% for females), while the frequencies of archs (1.9% for males, 2.9% for females) and ulnar loops (41.6% for males, 49.2% for females) are higher in females. The pattern intensity index for males (15.2) was higher than that for females (14.3). The mean of the total ridge count was higher (140.4$\\pm$41.2) in males than in females (129.8$\\pm$40.6). There was no correlation between total ridge count and IQ (r=-0.0027, N=343). Total ridge count among different racial groups was found to vary slightly.

• The Korean Journal of Pharmacology
• /
• v.11 no.2
• /
• pp.47-53
• /
• 1975

Pan-Korean multi-center trial of doxycycline in the treatment of upper and lower respiratory infection was carried out in the summer(from May to October) of 1975. A total of 204 patients between the ages of 3 and 75 was treated by 37 physicians including the internal medicine, pediatrics and ENT specialist in 17 general hospitals and 2 private clinics all-over the country. The dosage recommended was 200 mg on the first day of therapy followed by 100 mg daily thereafter. The pediatric dosage was 4 mg/kg on the first day and then 2mg/kg on each successive day. The subjective and objective signs of respiratory infection such as temperature, cough, sputum, pain and associated inflammatory symptoms were assessed using the carefully designed protocols and it showed rapid improvement by the fifth day (80%) of therapy. Only minor side-effects were reported and these were mild and mainly limited to gastrointestinal tract. The overall evaluation of the trial showed that 170 patients(83.3%) had a very good or good result, 13 patients (6.4%) a moderate and another 13 patients (6.4%) a negative result.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.29 no.4
• /
• pp.178-184
• /
• 2018

Objectives: The objective of this study was to investigate the concordance of Diagnostic and Statistical Manual of Mental Disorders (DSM-IV and DSM-5) diagnostic criteria for autism spectrum disorder (ASD). Methods: We retrospectively reviewed the medical records of 170 subjects (age range: 3-23, 140 boys) with developmental delay or social deficit from January 2011 to July 2016 at the Department of Psychiatry of Asan Medical Center. The Autism Diagnostic Interview-Revised (ADI-R), the Autism Diagnostic Observation Schedule (ADOS), and intelligence tests were performed for each subject. Diagnosis was reviewed and confirmed for each subject with DSM-IV Pervasive Developmental Disorder (PDD) and DSM-5 ASD criteria, respectively. Results: Fifty-eight of 145 subjects (34.1%) who were previously diagnosed as having PDD in DSM-IV did not meet DSM-5 ASD criteria. Among them, 28 (48.3%) had Asperger's disorder based on DSM-IV. Most algorithm scores on ADOS and all algorithm scores on ADI-R were highest in subjects who met both DSM-IV PDD criteria and DSM-5 ASD criteria (the Convergent group), followed by subjects with a DSM-IV PDD diagnosis who did not have a DSM-5 ASD diagnosis (the Divergent group), and subjects who did not meet either DSM-IV PDD or DSM-5 ASD criteria (the non-PDD group). Intelligence quotient was lower in the Convergent group than in the Divergent group. Conclusion: The results of our study suggest that ASD prevalence estimates could be lower under DSM-5 than DSM-IV diagnostic criteria. Further prospective study on the impact of new DSM-5 ASD diagnoses in Koreans with ASD is needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.161-170
• /
• 2000

The use of autopolymerizing-cured resin and light-cured resin for direct relining of complete and partial dentures has been popular. This investigation compared the adhesion of autopolymerizing-cured reline resin(Tokuso Rebase, Mild Rebaron) or light-cured reline resin(Mild Rebaron LC, Lighton-U) to metal base or resin base. Cylindrical samples were made from metal($Biosil^{(R)}$) or heat-cured resin(QC-20) and were prepared to produce a flat bonding surface. Cylindrical metal samples were roughened by scratch or by scratch and sandblast and were treated with primer(MR Bond) after scratch and sandblast. And then, liners were prossesed to the cylindrical metal or resin samples according to the manufacturer's recomendations so as to bond metal base or resin base. The specimens were tested in pure tension by using an Instron Univasal testing machine for the four direct reline resins. The results were as follows ; 1. In comparison with tensile bond strength of material relined on resin base or metal base, the case of resin base produced significantly higher tensile bond strengths than the case of metal base. 2. Metal surface pretreatment or primer improved the tensile bond strength between the reline resin and the metal($Biosil^{(R)}$) base. 3. The tensile bond strengths of Mild Rebaron LC relined on resin base or metal base were similar to those of the other reline resins.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.357-362
• /
• 2017

Among the lithium metal oxides for asymmetric hybrid supercapacitor, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. The pulverized LTO powder was observed to show the enhanced capacity from 120 mAh/g to 156 mAh/g at C-rate (10, 100 C). Hybrid supercapacitor module(48V, 416F) was fabricated using an asymmetric hybrid capacitor with a capacitance of 7500F. As a result of the measurement of C-rate characteristics, the module shows that the discharge time is drastically reduced at more than 50C, and the ESR and voltage drop characteristics are increased. The energy density and power density were reduced under high C-rate conditions. When designing asymmetric hybrid supercapacitor module, the C-rate and ESR should be considered As a result of measuring the 5 kw UPS, it was discharged at the current of 116A~170A during the discharge in the voltage range of 48V~30V, and the compensation time at discharge was measured to be about 33.2s. Experimental results show that it can be applied to applications related to stabilization of power quality by applying hybrid supercapacitor module.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.404-413
• /
• 2019

Objectives: Chronic obstructive pulmonary disease(COPD) is an important cause of mortality in workers exposed to hazardous dust, such as crystalline silica or coal, and COPD is related to inflammation and oxidative stress in the lung. The aim of this study was to evaluate the association of oxidative stress and inflammation to COPD in retired workers exposed to mineral dust. Methods: The levels of malondialdehyde(MDA) in EBC as biomarkers for oxidative stress and C-reactive protein(CRP) and lactate dehydrogenase(LD) as biomarkers for inflammation were measured in 107 male subjects(63 pneumoconiosis and 42 COPD subjects). Results: Mean levels of EBC MDA(2.03 nmol/L vs. 4.65 nmol/L, p=0.010) and serum LD(170.3 U/L vs. 185.9 U/L, p=0.022) were significantly higher in subjects with COPD, but mean levels of serum CRP(p=0.469) did not show a statistical difference between the study groups. Level of EBC MDA was negatively correlated with ${%}FEV_1$ predicted(r=-0.279, p=0.004) and ${%}FEV_1/FVC$ ratio(r=-0.397, p<0.001). Conclusions: These results suggest that EBC is a useful biological matrix for investigation of respiratory oxidative stress. High levels of EBC MDA and serum LD are related to COPD in retired workers exposed to mineral dust.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.3
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• Women's Health Nursing
• /
• v.28 no.4
• /
• pp.286-295
• /
• 2022

Purpose: Based on the World Health Organization framework on reproductive health, this descriptive correlational study investigated the factors affecting reproductive health-promoting behaviors of married women, with a focus on family values and reproductive health knowledge. Methods: A cross-sectional survey was conducted on 170 married women between the ages of 25 and 49 years living in Daegu, Korea. The general and reproductive health characteristics, family values, and reproductive health knowledge of married women were identified, as well as factors affecting reproductive health-promoting behaviors. A questionnaire survey was administered to investigate the impact of various factors on reproductive health-promoting behaviors. Results: Positive correlations were shown for family values (r=.78, p<.001) and reproductive health knowledge (r=.55, p<.001). Family values (β=.35, p<.001) and reproductive health knowledge (β=.24, p<.001) were identified as factors influencing reproductive health-promoting behaviors. According to the regression model, the explanatory power of factors affecting reproductive health-promoting behaviors among married women was 51.2%. Conclusion: A history of reproductive diseases, family values, and reproductive health knowledge were identified as factors influencing reproductive health-promoting behaviors. These results will provide basic data for the development of a reproductive health-promoting program, including a positive approach to reproductive health among married women, and will serve as a basis for further research on intervention strategies.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.168-170
• /
• 2001

The NiCr is an important material for present thin-film resistor application owing to its low TCR and thermal stability. In this work, the NiCr thin films were deposited on corning glass substrate by reactive magnetron sputtering and the annealing at temperatures range from 300 to $500^{\circ}C$ for 20 min in vacuum. X-ray, AFM, $R_s$(surface leakage current) have been used to study the structural and electrical properties of the NiCr thin films. The high precision NiCr thin films resistor with TCR(temperature coefficient of resistance) of less then 10 ppm/$^{\circ}C$ was obtained under in in-situ annealing at $300^{\circ}C$ on Cr buffer layer substrate. It is clear that the NiCr thin-films resistor electrical properties are low TCR related with it's annealing and buffer layer condition. NiCr thin film resistor having a good thermal stability and low TCR properties are expected for the application to the dielectric material of passive component.