• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.81-87
• /
• 2009

The effect of oil on convective boiling of R-123 in an enhanced tube bundle is experimentally investigated at $26.7^{\circ}C$ saturation temperature. The enhanced tube had pores (0.23 mm diameter) and connecting gaps (0.07 mm width), which had been optimized using pure R-123. The effects of oil concentration (0 to 5%), heat flux (10 to $40\;kW/m^2$), mass velocity (8 to $26\;kg/m2^s$) and vapor quality are investigated. The oil significantly reduces the bundle boiling heat transfer coefficient. With 1% oil, the reduction is approximately 35%. Further addition of oil further reduces the heat transfer coefficient. The data are also compared with the pool boiling counterpart. The reduction in the heat transfer coefficient is smaller in a bundle (convective boiling) than in a pool (single-tube pool boiling), with larger difference at a smaller heat flux. Similar to pure R-123 case, the effects of mass velocity and vapor quality are negligible for the convective boiling of R-123/oil mixture.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1831-1843
• /
• 2001

In this study, convective boiling tests were conducted for enhanced tube bundles. The surface geometry consists of pores and connecting gaps. Tubes with three different pore sizes (d$_{p}$ = 0.20, 0.23 and 0.27 mm) were tested using R-123 and R-l34a for the following range: 8 kg/m$^2$s G 26 kg/m$^2$s, 10 kW/m$^2$ q0 40 kW/m$^2$and 0.1 $\chi$ 0.9. The convective boiling heat transfer coefficients were strongly dependent on heat flux with negligible dependency on mass flux or quality. For the present enhanced geometry (pores and gaps), the convective effect was apparent. The gaps of the present tubes may have served routes for the passage of two-phase mixtures, and enhanced the boiling heat transfer. The convective effect was more pronounced at a higher saturation temperature. More bubbles will be generated at a higher saturation temperature, which will lead to enhanced convective contribution. The pore size where the maximum heat transfer coefficient was obtained was larger for R-l34a (d$_{p}$ = 0.27 mm) compared with that for R-123 (d$_{p}$ = 0.23 mm). This trend was consistent with the previous pool boiling results. For the enhanced tube bundles, the convective effect was more pronounced for R-134a than for R-123. This trend was reversed for the smooth tube bundle. Possible reasoning is provided based on the bubble behavior on the tube wall. Both the modified Chen and the asymptotic model predicted the present data reasonably well. The RMSEs were 14.3% for the modified Chen model and 12.7% for the asymptotic model.model.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.123-129
• /
• 2008

The final objective of this study is to establish the research and development (R&D) encouragement strategy in construction area. For this, this study deals with the survey of current status of Korean construction industry. The result of this study is as follow; First, it is necessary for strengthen the R&D infrastructure to establish R&D cooperation system between industry, university, government and public institute. Second, private sector's should do its role as one of the four performing sectors in R&D network, not just assisting role. We will apply the result for establshing the national strategy as basic data.

• 대한핵의학회지
• /
• 제32권1호
• /
• pp.10-19
• /
• 1998

The SPECT radiopharmaceuticals labeled with I-123 for dopamine transporter imaging have been used to measure dopamine transporters in patients with movement disorders. However, a cyclotron produced I-123 limits its availiability and ease of use as a radioisotope to be labeled with pharmaceuticals in routine clinical diagnostic procedures. Recently, new radiophannaceuticals for Tc-99m which has optimal characteristic for SPECT imaging have been developed to overcome the limits of using I-123. The purpose of this study was to compare the quality of [Tc-99m]TRODAT-1 with [I-123]IPT SPECT data and then to evaluate the usefulness of [Tc-99m]TRODAT-1 SPECT by using three noninvasive simplified quantitative methods. TRODAT-1 labeled with Tc-99m($15.93{\pm}0.82mCi$) and IPT labeled with I-123($6.60{\pm}0.11mCi$) were injected into five normal controls. Dynamic [Tc-99m]TRODAT-1 SPECT scans of brain were performed for 10 minutes each over 180 minnutes, and for 20 minutes at 4 hrs and 5 hrs. [I-123]IPT SPECT scans were performed for 5 minutes each over 120 minutes. Time activity curves were generated for the left basal ganglia(LBG), right basal ganglia(RBG), and occipital cortex(OCC). Dopamine transporter parameters were ohtained using (BG-OCC)/OCC, graphical method($R_V$), and area ratio method($R_A$). TRODAT-1 and IPT SPECT imaging showed high uptake at the level of the basal ganglia. (BG-OCC)/OCC ratios for TRODAT-1 and IPT were $0.80{\pm}0.14$, and $3.22{\pm}0.81$, $R_Vs$ were $0.62{\pm}0.12$, and $2.30{\pm}0.35$, and $R_As$ were $0.37{\pm}0.08$ and $1.73{\pm}0.31$, respectively. In conclusion, further improvement of [Tc-99m]TRODAT-1 imaging characteristics may be required to estimate the dopamine transporter concentrations in human brains although it shows clear BG localization.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.123-123
• /
• 2009

• 한국의학물리학회지:의학물리
• /
• 제14권4호
• /
• pp.268-278
• /
• 2003

목 적 : $^{123}$ I IPT SPECT에서 선조체 섭취율(specific striatal binding ratio: SBR)과 미상핵과 전$.$후 조가비핵의 비(anterior/posterior ratio： APR)를 측정하기 위해 육안적인 방법으로 설정한 수동 관심영역설정 방법과 MR template을 영상 융합하여 해부학적 영상을 기준으로 관심영역을 설정하는 방법에서 수동방법과 영상 융합 방법간 차이의 유의성과 분석 그룹간의 유의성과 재현성을 분석하고자 한다. 대상 및 방법： Early parkinson군 17명(남/녀：8/9, 56.6$\pm$10.8세)과 severe parkinson군 13명(남/녀：8/5, 56.4$\pm$11.1세), 정상인 11명(남/녀：7/4, 57.8$\pm$14.4세)을 대상으로 $^{123}$ I IPT 259 MBq을 정맥 주사한 후 얻은 $^{123}$ I IPT SPECT 영상에서 수동 ROI와 영상융합방법에 의한 ROI를 설정하였다. 영상융합방법에 의한 자동 관심영역 설정방법은 NMI 방법으로 $^{123}$ I IPT SPECT와 MNI T1 template를 영상 융합하여 midthalamic level에서 선조체의 경계를 따라 하부조직을 7개의 관심영역으로 구분하여 SBR과 APR을 측정하고 수동방법으로 측정한 SBR과 APR과 통계적 유의성을 분석하였다. 결 과：수동 관심영역 설정방법과 자동 관심영역 설정방법에 의한 두 분석 방법간 비교에서 SBR은 정상인 그룹(r=0.853, P=0.001), early parkinson군(H＆Y stage I, II) (r=0.841, P=0.000), severe parkinson군(H＆Y stage III, IV) (r=702, P=0.007) 모두에서 유의한 상관관계를 보였으나 APR은 early parkinson군에서만 유의한 상관관계(r=0.720, P=0.001)를 보였고 정상인(r=0.567, P=0.069), severe parkinson군(r=0.413, P=0.161)로 유의한 상관관계를 보이지 않았다. 분석그룹간 비교에서 수동 관심영역 설정방법에서 정상인과 early parkinson군(P=0.000), 정상인과 severe parkinson군(P=0.000), early parkinson군과 severe parkinson군(P=0.013) 모두 유의한 결과를 보였고, 자동 관심영역 설정방법에서 정상인과 early parkinson군(P=0.000), 정상인과 severe parkinson군(P=0.000), early parkinson군과 severe parkinson군(P=0.003)에서는 유의한 결과를 보였다. APR은 수동 관심영역 설정방법에서는 분석그룹간에 유의한 차이를 보이지 않았다(정상인과 early parkinson군：P=0.316, 정상인과 severe parkinson군：P=0.256, early parkinson군과 severe parkinson군：P=0.969). 자동 관심영역 설정방법에서는 정상인과 early parkinson군(P=0.038), 정상인과 severe parkinson군(P=0.027)에서는 유의한 결과를 보였으나 early parkinson군과 severe parkinson군에서는 유의한 결과를 보이지 않았다(P=0.948). 재현성은 CV값으로 자동 관심영역 설정방법이 7.2%, 수동 관심영역 설정방법이 31%로 자동 관심영역 설정방법의 재현성이 4.3배 높았다. 결 론：$^{123}$ I IPT SPECT영상에서 SBR과 APR의 측정이 해부학적 표준영상인 T1 template를 기준으로 영상 융합하여 선조체와 하부조직을 미상핵과 조가비핵 전측과 후측으로 구분하여 섭취율을 측정하는 방법이 수동으로 관심영역을 설정하여 분석하는 방법보다 통계적으로 유의하고 재현성 있는 결과를 보였다.

• 설비공학논문집
• /
• 제23권3호
• /
• pp.208-215
• /
• 2011

In this work, pool boiling heat transfer coefficients(HTCs) of R22, R123, R134a, and R245fa are measured on both horizontal plain and 26 fpi low fin tubes. The pool boiling temperature is maintained at $7^{\circ}C$ and heat flux is varied from 80 $kW/m^2$ to 10 $kW/m^2$ with an interval of 10 $kW/m^2$. Wall temperatures are measured directly by thermocouples inserted through holes of 0.5 mm diameter. Test results show that HTCs of high vapor pressure refrigerants are usually higher than those of low pressure fluids in both plain and low fin tubes. On a plain tube, HTCs of R245fa are 23.3% higher than those of R123 while on a 26 fpi low fin tube, HTCs of R245fa are 46.3% higher than those of R123. The fin effect is more prominent with low vapor pressure refrigerants than with high vapor pressure ones due to a sweeping effect.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.123-129
• /
• 2016

Through two case studies on the United States and Japan, this research aims to identify the characteristics of disaster management research and thereby provides policy implications for Korea. This paper analyzed government-funded disaster management R&D for each country: the National Science Foundation awarded projects from 2005 to 2015 for the United States, and Grants-in-Aid for Scientific Research from 2011 to 2015 managed by the Japan Society for the Promotion of Science for Japan. As a result, four following implications were drawn. 1) pursuit of R&SD(Research & Solution Development) instead of R&D, 2) shift from prevention to life-cycle management, 3) necessity of multidisciplinary research, and 4) emphasis on post-disaster investigation.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.732-742
• /
• 1998

Prediction method for heat transfer coefficients in a horizontal smooth tube with forced convection condensation is proposed. In this paper, the analogy between momentum and heat transfer was applied to an annular flow regime and the logarithmic velocity distribution is applied to describe the velocity profile within the liquid film. Prediction results are compared with those of experimental ones. The test refrigerants are R113, R22, R134a, R407C(R33/R125/R134a, 23/25/52 wt%), R410A(R32/R125, 50/50 wt%) and R134a＋R123(R134a/R123, 85.5/14.5 wt%) which are used under operating conditions in a condenser of air-conditioner. The proposed prediction method shows good agreement with experimental data within$\pm 30%$ for pure refrigerants. For the mixture refrigerants including the ternary mixture refrigerant R407C, condensation heat transfer from this study are higher than those from experiments. By correcting the constant in two-phase frictional multiplier, the predicated heat transfer coefficients become similar to the experimental results.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.381-388
• /
• 2003

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to mixtures of HFC-l34a and HCFC-123 in a uniformly heated horizontal tube. Tests were run at a pressure of 0.6 MPa and in the ranges of heat flux 1-50 kw/$m^2$, vapor quality 0-100 % and mass velocity 150-600 kg/$m^2$s. Heat transfer coefficients of mixture were less than the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Measured data of heat transfer are compared to a few available correlations proposed for mixtures. The correlation of Jung et. al. satisfactorily predicted the present data, but the data in lower quality was overpredicted and underpredicted the high quality data. The correlation of Kandlikar considerably underpredicted most of the data. and showed the mean deviation of 35.1%.