• 한국항공우주학회지
• /
• 제39권4호
• /
• pp.321-331
• /
• 2011

본 연구는 theta 투영법을 이용하여 터보제트 터빈 블레이드 크리프 특성을 파악하는데 목적이 있다. Theta 투영법은 우수한 정확성을 지니고 있어 폭넓게 사용되고 있다. 크리프 특성을 파악하기 위해 고온 크리프 시험을 수행하였으며, 시험 조건은 터보제트 엔진 운용조건과 소재의 비선형 특성을 고려하여 선정하였으며, four theta 모델의 적합성을 평가하기 위해 크리프 시험 결과와 비교하였다. 크리프 시험결과를 활용하여 크리프 곡선은 four theta model을 이용하여 생성하였다. 반복적인 계산을 통하여 비선형 최소자승법을 이용하여 시험 결과에 대해 최적의 theta 값을 도출하였다. Theta 투영법을 이용하여 크리프 곡선을 생성한 결과 $R^2$값이 0.95이상의 우수한 정확성을 지니는 것을 확인하였다. 또한 four theta 모델의 검정을 위해 수행한 시험 결과와 비교하여 예측된 theta 값이 90.0%의 정확도를 가지어, theta 투영법은 크리프 거동을 예측하여 설계목적에 이용하기 위해 유용하게 사용될 수 있다.

• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.323-333
• /
• 2014

In this paper, the wakes behind a square cylinder were simulated using two kinds of different turbulence models for the eddy viscosity concept such as the zero- and the one-equation model in which the former is the mixing length model and the latter is the k-equation model. For comparison between numerical and analytical solutions, we employed three skill assessments: the correlation coefficient(r) for the similarity of the wake shape, the error of maximum velocity difference(EMVD) for the accuracy of wake velocity and the ratio of drag coefficient(RDC) for the pressure distribution around the structure. On the basis of the numerical results, the feasibility of each model for wake simulation was discussed and a suitable value for the empirical constant was suggested in these turbulence models. The zero-equation model, known as the simplest turbulence model, overestimated the EMVD and its absolute mean error(AME) for r, EMVD and RDC was ranging from 20.3 % to 56.3 % for all test. But the AME by the one-equation model was ranging from 3.4 % to 19.9 %. The predicted values of the one-equation model substantially agreed with the analytical solutions at the empirical mixing length scale $L=0.6b_{1/2}$ with the AME of 3.4 %. Therefore it was concluded that the one-equation model was suitable for the wake simulation behind a square cylinder when the empirical constant for eddy viscosity would be properly chosen.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.209-217
• /
• 2000

The solubility and miscibility measurement apparatus was developed and used to obtain data for refrigerant/oil mixture. The solubility and miscibility data for R-410A/68 ISO VG polyol ester (POE) oil mixture are obtained over the temperature range from -20 to $60^{circ}C\;with\;10^{\circ}C$ intervals and the oil concentration range from 0 to 90 wt%. Using the experimental data, an empirical model was developed to predict the solubility relations for R-410A/POE oil mixture at equilibrium. In the R-410A/Solest 68 oil mixture, the average root-mean-square deviation between measured data and calculated results from the empirical model is 3.4% and in the R-4104/EMKARATE RL 68H oil mixture, that is 2.86%. For R-410A/68 ISO VG POE oil mixture immiscibility was usually observed at the low oil concentrations(5~30 wt%) over the all experimental temperature range($-20~60^{circ}C$) and at the high oil concentrations(50~90 wt%) over the low experimental temperature range($-2O~0^{circ}C$).

• 한국강구조학회 논문집
• /
• 제28권2호
• /
• pp.75-83
• /
• 2016

기존 콘크리트충전 각형강관(CFT) 구조에 사용하는 각형강관은 4개의 판을 용접하여 제작하는 박스칼럼이 일반적이다. 그러나 이러한 강관은 제작효율이 저하되며, 또한 기둥-보 접합부에는 내측 다이아프램과 관통 다이아프램을 용접하는데 특수한 용접기술이 필요하다. 따라서, 얇은 강판을 절곡하는 방식으로 응력집중 위치의 용접을 피하고, 단면효율이 극대화된 내부앵커 돌출형의 용접조립 각형강관을 개발하게 되었다. 용접조립 각형강관은 강관내부에 스티프너가 설치되어 내측 다이아프램과 관통 다이아프램과 간섭이 발생하게 되므로 본 연구에서는 용접조립 각형CFT 기둥-보 접합부로 외다이아프램형식을 채택하고 외다이아프램의 설계식을 제안하였으며, 기둥-보 접합부의 거동을 파악하기 위해 실대형 4개 실험체를 제작하여 구조거동 및 내력을 분석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.367-371
• /
• 1986

Dynamic and equilibrium properties of n-alkane chains immersed in solvent molecules have been investigated by a molecular dynamics method. The n-alkane chain is assumed to be a chain of elements (CH$_2$) interconnected by bonds having a fixed bond length and bond angle, but each bond of the chain is allowed to execute hindered internal rotation. We studied the effect of the number of the chain elements (N$_c$ = 10, 15 and 20) on the equilibrium properties of the system, e.g., the pair correlation functions between a chain element and solvent molecules, g$_{cs}$(r), and between the chain elements, g$_{cc}$(r), and the configurational properties such as the mean-square end-to-end distance < R$^2$ >, the mean-square radius of gyration < S$^2$ >, and the eigenvalues of the moment-of-inertia tensor < S$_i^2$ > / < S$^2$ > (i = 1, 2 and 3). We also studied the dynamic properties of the system, e.g., the autocorrelation function C(A;t) where A = R$^2$(t), = S$^2$(t), or = ${\vec{V}}(t)({\vec{V}}$ = velocity of the center of mass), and the diffusion coefficient D. The g$_{cs}$(r)'s are almost equal irrespective of the change of Nc while g$_{cc}$(r) becomes larger as N$_c$ increases; The MD computed configurational properties < R$^2$2 > and < S$^2$ > were found to be a little different from the values calculated from the statistical equations of < R$^2$ > and < S$^2$ >, it may be due to the fact that our model for the MD simulations includes a long-range volume effect. From the < S$_i^2$ > / < S$^2$ >, it is found that the chain molecule has a nearly spherical shape irrespective of the variation of N$_c$. For the dynamic properties we found that the C(R$^2$;t) and C(S$^2$;t) of lower N$_c$ decay faster than those of higher N$_c$, while the C($\vec V$;t) of the center of mass in the chain is weakly dependent on the N$_c$. The center of mass diffusion coefficient D$_c$ decreases as N$_c$ increases while the end point diffusion coefficient D$_e$ is nearly equal irrespective of the change of N$_c$.

• 설비공학논문집
• /
• 제25권3호
• /
• pp.143-149
• /
• 2013

In this work, nucleate pool boiling heat transfer coefficients (HTCs) of R134a and R1234yf are measured, on flat plain, 26 fpi low fin, Turbo-B, Turbo-C and Thermoexcel-E surfaces. All data are taken at the liquid pool temperature of $7^{\circ}C$, on a small square copper plate ($9.53mm{\times}9.53mm$), at heat fluxes from $10kW/m^2$ to $200kW/m^2$, with an interval of $10kW/m^2$. Test results show that nucleate boiling HTCs of all enhanced surfaces are greatly improved, as compared to that of a plain surface. Nucleate pool boiling HTCs of R1234yf are very similar to those of R134a, for the five surfaces tested.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.523-533
• /
• 2022

Several prediction model of penetration rate (PR) of tunnel boring machines (TBMs) have been focused on applying to design stage. In construction stage, however, the expected PR and its trends are changed during tunneling owing to TBM excavation skills and the gap between the investigated and actual geological conditions. Monitoring the PR during tunneling is crucial to rescheduling the excavation plan in real-time. This study proposes a sequential prediction method applicable in the construction stage. Geological and TBM operating data are collected from Gunpo cable tunnel in Korea, and preprocessed through normalization and augmentation. The results show that the sequential prediction for 1 ring unit prediction distance (UPD) is R²≥0.79; whereas, a one-step prediction is R²≤0.30. In modeling algorithm, a gradient boosted regression tree (GBRT) outperformed a least square-based linear regression in sequential prediction method. For practical use, a simple equation between the R² and UPD is proposed. When UPD increases R² decreases exponentially; In particular, UPD at R²=0.60 is calculated as 28 rings using the equation. Such a time interval will provide enough time for decision-making. Evidently, the UPD can be adjusted depending on other project and the R² value targeted by an operator. Therefore, a calculation process for the equation between the R² and UPD is addressed.

• 분석과학
• /
• 제23권1호
• /
• pp.68-73
• /
• 2010

Cimetidine HCl 함유 주사액에 대한 네모파 전압전류법(SWV) 분석방법을 개발 하고자 인산염 완충용액(pH 3.01~8.97)을 지지전해질로 하여 $5.00{\times}10^{-4}\;M$의 cimetidine HCl용액에 대하여 SWV를 실행한 결과 cimetidine의 구조 내 -C=N-C$\equiv$N-의 전기화학적 환원으로 추정되는 하나의 환원 봉우리는 Ep가 -0.051V/pH씩 이동하여 수소가 관여함을 나타내었다. Cimetidine HCl을 정량분석 하기 위하여 세 가지 인산염 완충용액을 지지전해질로 하여 농도범위 $1.00{\times}10^{-5}\;M\sim5.00{\times}10^{-3}\;M$에서 검량곡선을 작성할 때 기울기는 127,407nA/M(pH 3.01), 115,125nA/M(pH 5.00) 및 111,287nA/M(pH 7.00)이었으며, 상관계수 $R^2$값$\geqq$0.9997의 좋은 직선 성을 나타내었다. 타그마주$^{(R)}$ 앰플을 표준물 첨가법으로 SWV 정량분석 할 때 하루 중 정밀도(n=4)는 분석시료 제조당일에 1 앰플 당 cimetidine의 함량이 $203{\pm}3.8mg$(규정된 함량의 102%)으로 RSD 1.9%로 나타났으며, 5일에 걸친 날짜 간 정밀도(n=4)는 1.3%이내의 RSD를 보여 정밀도가 합리적이었다.

• 한국병원경영학회지
• /
• 제7권1호
• /
• pp.41-63
• /
• 2002

The purpose of this study is to analyze the interrelation of influential factors in organizational conflict and organizational commitment. The data for this study were collected through a self-administered survey with a structured Questionnaire to 1,167 subjects from several nursing staff members, administration staff members and medical technicians of six hospitals. In this analysis frequency test, t-test, ANOVA, hierarchical multiple regression and structural equation model were used. The main findings of this study are as follows. 1. Factors which influence organizational conflict were analyzed. The type of occupation and the year of service were socio-demographic variables which influenced organizational conflict positively. Adjusted R square was 0.03. Perceptions on organizational structure and organizational culture were analyzed with two- level variables that were added. The findings were as follows. Adjusted R square increased to 0.25. The year of service, internal process culture and rational goal culture were positive variables. The design of organizational structure, human relations culture and open system culture were negative variables. 2. Variables which influence organizational commitment were analyzed. Age and the year of service were positive variables, while academic background based on high school education was a negative variable. Adjusted R square was 0.16. Perceptions on organizational structure and organizational culture were analyzed with two-level variables that were added. The findings were as follows. The characteristics of organizational structure, human relations culture and organizational culture were positive variables. Adjusted R square increased to 0.55. The variables of organizational conflict were added in 3 steps. Findings were as follows. The variables of hierarchical conflict showed negative influence and were included in two-level influential variables. Adjusted R square increased to 0.56. 3. Structural equation model was analyzed in order to examine the relation between organizational structure and the variables of organizational culture, organizational conflict and organizational commitment. Thirteen path coefficients out of seventeen path coefficients were significant. Age had negative influence on organizational conflict and positive influence on organizational commitment. The year of service had positive influence on organizational conflict and organizational commitment. The design of organizational structure, human relations culture and open system culture had negative influence on organizational. conflict. They had positive influence on organizational commitment. Internal process culture and rational goal culture had positive influence on organizational conflict. Organizational conflict had negative influence on organizational commitment. The squared multiple correlation of this model was 25.1% in organizational conflict and 52.7% in organizational commitment. The conclusion of this study is as follows. Factors in organizational structure and organizational culture, rather than socio-demographic factors, had a stronger influence on the organizational conflict and organizational commitment of hospitals. In order to decrease organizational conflict, to increase organizational commitment and to maximize the effectiveness of hospital management, it is necessary to understand the overall relation between organizational structure, organizational culture, organizational conflict and organizational commitment, with the effort of improving personalized factors and individual factors of organization management.

• Transactions on Electrical and Electronic Materials
• /
• 제14권4호
• /
• pp.177-181
• /
• 2013

In this paper, silicon solar cells are analyzed regarding power conversion efficiency by changed capacitance in the depletion region. For the capacitance control in the depletion region of silicon solar cell was applied for 10, 20, 40, 80, 160 and 320 Hz frequency band character and alternating current(AC) voltage with square wave of 0.2~1.4 V. Academically, symmetry formation of positive and negative change of the p-n junction is similar to the physical effect of capacitance. According to the experiment result, because input of square wave with alternating current(AC) voltage could be observed to changed capacitance effect by indirectly method through non-linear power conversion (Voltage-Current) output. In addition, when input alternating current(AC) voltage in the silicon solar cell, changed capacitance of depletion region with the forward bias condition and reverse bias condition gave a direct effect to the charge mobility.