• Steel and Composite Structures
• /
• v.17 no.6
• /
• pp.891-906
• /
• 2014

This study aims to present a three dimensional finite element model to investigate the wave propagation in a concrete filled steel tubular column (CFSC) due to transient impact load. Both the concrete and steel are regarded as linear elastic material. The impact load is simulated by a semi sinusoidal impulse. Besides the CFSC models, a concrete column (CC) model is established for comparing under the same loading condition. The propagation characteristics of the transient waves in CFSC are analyzed in detail. The results show that at the intial stage of the wave propagation, the velocity waves in CFSC are almost the same as those in CC before they arrive at the steel tube. When the waves reach the column side, the velocity responses of CFSC are different from those of CC and the difference is more and more obvious as the waves travel down along the column shaft. The travel distance of the wave front in CFSC is farther than that in CC at the same time. For different wave speeds in steel and concrete material, the wave front in CFSC presents an arch shape, the apex of which locates at the center of the column. Differently, the wave front in CC presents a plane surface. Three dimensional effects on top of CFSC are obvious, therefore, the peak value and arrival time of incident wave crests have great difference at different locations in the radial direction. High-frequency waves on the waveforms are observed. The time difference between incident and reflected wave peaks decreases significantly with r/R when r/R < 0.6, however, it almost keeps constant when $r/R{\geq}0.6$. The time duration between incident and reflected waves calculated by 3D FEM is approximately equal to that calculated by 1D wave theory when r/R is about 2/3.

• Journal of Veterinary Clinics
• /
• v.19 no.1
• /
• pp.43-48
• /
• 2002

This study was performed to investigate the effects of recombinant BST formulation treatment on the milk yield, milk components, mastitis, and general cow health condition when the formulations of retinyl palmitate, cholecalciferol and rBST were administered after the peak period of milk production. The milk yields of treatment groups (Group I, II, III and IV) were increased from 21.5% to 29.0% than that of control group. There was significant difference in milk production between treatment group II, IV and control group (P<0.05). However, there was no significant difference in milk production between treatment group I, III and control group (P<0.05). And the addition of retinyl palmitate and cholecalciferol into rBST formulation did not increase the milk yield. The milk of treatment groups with sustained-release rBST did not show significant difference in milk components (milk fat, protein, lactose, and solid not fat). However, there were minor changes, primarily in fat content of milk, during the first few weeks of rBST administration. There was no incidence of clinical mastitis between rBST treatment groups and control group. Addition of high and medium concentration of retinyl palmitate and cholecalciferol into sustained-release rBST formulation was efficient in reduction of somatic cell count in milk. There was great energy deficit in all treatment groups compared with control group during the early study period. Thus, the body condition score of all treatment groups showed lower value than control group. No evidences of metabolic health problems, such as ketosis, milk fever, and downer cow were observed. Incidence of general lameness did not appear on all treatment groups during 140 days of this study.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.45-52
• /
• 2024

Objective: The purpose of this study was to measure the morphological characteristics of the foot and biomechanical variables of the lower extremity joints during vertical jump and investigate the relationship between foot morphology and biomechanics of vertical jump. Method: 24 men in their 20s (age: 22.42 ± 1.41 yrs, height: 173.37 ± 4.61 cm, weight: 72.02 ± 6.21 kg, foot length: 251.70 ± 8.68 mm) participated in the study. Morphological characteristics of the foot included the length of the first toe, the length of the second toe, and the horizontal length from the center of ankle joint to the achilles tendon (Plantar Flexion Moment Arm [PFMA]). Biomechanical variables were measured for plantar flexor strength of the ankle joint and peak angular velocity, moment, and power of the lower extremity joint during vertical jump. Results: There was a significant correlation between the length of the first toe and plantar flexion strength at 30°/s [r=.440, p=.016], the angular velocity of the metatarsophalangeal [MTP] joint [r=-.369, p=.038] while significant correlations between PFMA and the angular velocities of the knee joint [r=.369, p=.038] and ankle joint [r=.420, p=.021] were found. There were also significant correlations between the length of the first toe and the maximum moment of the hip joint [r=.379, p=.034], and the length of the second toe and the power of the hip joint [r=-.391, p=.029]. Finally, significant correlations between PFMA and the power of the ankle joint [r=.424, p=.019] and MTP joint [r=.367, p=.039] were found. Conclusion: Based on the results of this study, the length of the toe and PFMA would be related to the function of the lower extremity joint. Therefore, this should be considered when designing the functional structure of a shoe. Furthermore, this relationship can be applied to intensive training for the plantar flexors and toe flexors to improve power in athletic performance.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.777-784
• /
• 2006

This study was designed to investigate between the semen characteristics and sperm chromatin structure in boar with different farrowing rates and relationship between fertility by AI and results of sperm chromatin structure assay (SCSA). The CASA (computer-aided sperm analysis) and SCSA were performed with liquid semen in boars. The all SCSA parameters based on the farrowing rates by AI were significantly differ (P<0.05). The significant negative correlations (P<0.05) were observed between all SCSA parameters and farrowing rate obtained by AI in the field. In conclusion, these results suggest that the sperm parameters evaluated in these studies may be useful indicators to predict the fertility by AI.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.5
• /
• pp.191-202
• /
• 2022

Markov envelope as a theoretical solution of the parabolic wave equation with Markov approximation for the von Kármán type random medium is studied and approximated with the convolution of two probability density functions (pdf) of normal and gamma distributions considering the previous studies on the applications of Radiative Transfer Theory (RTT) and the analysis results of earthquake records. Through the approximation with gamma pdf, the constant shape parameter of 2 was determined regardless of the source distance r_o. This finding means that the scattering process has the property of an inhomogeneous single-scattering Poisson process, unlike the previous studies, which resulted in a homogeneous multiple-scattering Poisson process. Approximated Markov envelope can be treated as the normalized mean square (MS) envelope for ground acceleration because of the flat source Fourier spectrum. Based on such characteristics, the path duration is estimated from the approximated MS envelope and compared to the empirical formula derived by Boore and Thompson. The results clearly show that the path duration increases proportionately to r_o^1/2-r_o², and the peak value of the RMS envelope is attenuated by exp (-0.0033r_o), excluding the geometrical attenuation. The attenuation slope for r_o≤100 km is quite similar to that of effective attenuation for shallow crustal earthquakes, and it may be difficult to distinguish the contribution of intrinsic attenuation from effective attenuation. Slowly varying dispersive delay, also called the medium effect, represented by regular pdf, governs the path duration for the source distance shorter than 100 km. Moreover, the diffraction term, also called the distance effect because of scattering, fully controls the path duration beyond the source distance of 300 km and has a steep gradient compared to the medium effect. Source distance 100-300 km is a transition range of the path duration governing effect from random medium to distance. This means that the scattering may not be the prime cause of peak attenuation and envelope broadening for the source distance of less than 200 km. Furthermore, it is also shown that normal distribution is appropriate for the probability distribution of phase difference, as asserted in the previous studies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.267-270
• /
• 2008

Thermo-mechanical simulation of the friction stir butt welding process was performed for AA5083-H18 sheets, utilizing commercial FVM code, STAR-CCM+, which is based on Eulerian formulation. Temperature and strain rate histories along the material flow were calculated under the steady state condition and simulated temperature distributions (profiles and peak values) were compared with experiments for verification. It was found that by including proper thermal properties of the backing plate (anvil) the accuracy of the simulation results increased significantly.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.353-355
• /
• 2002

We prepared 3-(1-hydroxyethyl)-bacteriopyrochlorophy11-a (3) possessing magnesium atom and phytyl ester from modification of natural bacteriochlorophyll(BChl)-a. A dichloromethane solution of (3$^1$R) and (3$^1$S)-3 was diluted with 100~1000 fold volume of cyclohexane to give new species absorbing near-infrared lights. The resulting Q, maximum of (3$^1$R)-3 was 860 nm and red-shifted by 2150 $cm^{-1}$ / from the monomeric. In the nonpolar organic solvent, epimeric (3$^1$S)-3 showed a 1ess red-shifted peak at 798 nm as well as a residual monomeric band. Such visible spectra indicated that 3 diastereose1ectively aggregated in cyclohexane to afford oligomers possessing a simi1ar supramolecular structure with chlorosomal aggregates of natural BChl-d, 7,8-dehydro-form of 3.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.15-22
• /
• 2016

The heat transport system transients of Wolsong 2,3,4 nuclear power plants were analysed during abnormal operating conditions. The compliance with requirements of AECB Regulatory Document R-77 for CANDU reactor was estimated. The analysis results showed that for each postulated accident the peak pressure values in the reactor headers are within the acceptance criteria given in ASME code requirements. The effect of LRV that is one of the overpressure protection device was very minor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.583-585
• /
• 1992

A study was undertaken to determine the incidence of short oestrus cycles and associated serum progesterone levels in Nili-Ravi buffaloes. Forty lactating buffaloes were kept under observation for oestrus activity for a period of sixty days. Blood samples from jugular vein from twenty buffaloes were used to determine associated serum progesterone levels during short oestrus cycles. Incidence of short oestrus cycles was 15.5 percent (Nine out of fifty eight oestrus cycles) and most of the short oestrus cycles occurred between first and second oestrus after calving. Lengths of short oestrus cycles ranged from 6 to 14 days. The most frequent length was 11 days. Serum progesterone levels were lower at oestrus and increased gradually attaining peak levels of 1.3 and 1.8 ng/ml on 7th day of 9 and 11 day short oestrus cycles. One buffalos exhibiting a short oestrus cycle of 12 days conceived which indicated that ovulation took place at the oestrus of short cycle.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.127-130
• /
• 2002

Step-edge dc SQUID magnetometers have been fabricated on sapphire substrate. Ce$O_{2}$ buffer layer and $YBa_{2}$$Cu_{3}$ $O_{7}$(YBCO) films were deposited in-situ on the low angle (~$35^{\circ}$)steps formed on the substrates. Typical 5-$\mu$m-wide junction has $R_{N}$ of 4 $\Omega$ and $I_{c}$ of 60 $\mu$A with $I_{c}$$R_{N}$ product of 240 $\mu$V at 77 K. According to applied bias current, depth of voltage modulation was changed and maximum voltage was measured 100~300 fT/$\checkmark$ Hz at 100 Hz, and about 1.5 pT/$\checkmark$ Hz at 1 Hz. For ac bias reversal method, field noise was decreased in the 1/f region. The QRS peak of magneto-cardiogram was measured 50 pT in the magnetically shielded room.