• Korean Journal of Applied Biomechanics
• /
• v.22 no.2
• /
• pp.201-208
• /
• 2012

The purpose of this study was to investigate the effect of leg extension exercises performed on outdoor resistance exercise machines on knee extension muscle strength and quadriceps muscle group cross sectional area (CSA) in elderly women. Two groups were recruited for this study, including an exercise group (EG: n=13, $71.38{\pm}2.79$ yrs) and a control group (CG: n=5, $73.4{\pm}5.94$), In all subjects, maximum isometric and isokinetic muscle strength of knee flexion and extension were measured using an isokinetic dynamometer (Cybex(R) Humac Norm Testing & Rehabilitation System, USA). Quadriceps muscle group CSA were measured using MRI (Philps, Intera 1.5 T, NE Netherlands). The results of this study showed that post-intervention isometric knee extension peak torque value were higher than pre-intervention measures in the EG. However, the EG did not show improvement in quadriceps muscle group CSA, Also, no differences in the shift of optimal knee joint angle were observed between pre and post-intervention exercise. Outdoor leg extension exercise showed small increases in muscle strength in comparison to other resistance training exercises. The results of this study suggest that because outdoor leg extension exercise machines lack a progressive loading mechanism, significant increases in muscle strength may not be obtained.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2016

The automotive manufactures increase their use of lightweight materials to improve fuel economy and energy usage has a significant influence on the choice of developing materials. To meet this requirements manufacturers are replacing individual body parts with lightweight metals, for these the process treating and painting surfaces is changing. The pre-coated steels are newly developed to avoid the conventional complex and non-environmental painting process in the body-in-white car manufacturing. The development of new joining techniques is critically needed for pre-coated steel sheets, which are electrically non-conductive materials. In the present study, dissimilar combination of pre-coated steel and galvanized steel sheets were joined by the self-piercing rivet, adhesive bonding and hybrid joining techniques. The tensile shear test and free falling high speed crash test were conducted to evaluate the mechanical properties of the joints. The highest tensile peak load with large deformation was observed for the hybrid joining process which has attained 48% higher than the self-piercing rivet. Moreover, the hybrid and adhesive joints were observed better strain energy compared to self-piercing rivet. The fractography analyses were revealed that the mixed mode of cohesive and interfacial fracture for both the hybrid and adhesive bonding joints.

• Water for future
• /
• v.9 no.2
• /
• pp.101-114
• /
• 1976

This paper presents a hydrologic method of probabilistic design flood calculation for ungauged small river basins. It is based on the study and analysis of the physiographic characteristics of the river basin for which stream flow records may not be available. Rainfall data is used at nearby station which has the rainfall intensity-duration-frequency relations. Musim cheon, second tributary of the Guem river, is selected for the sample study. Design floods for the stream reaches are computed by the Rational formula, the runoff coefficients being determined with the physiographic data such as soil type, land use and vepetal covers. Derived unit hydrograph at conneted main river basin is used to compute the peak flood discharge. Kajiyama formula and modified Kajiyama formula are used to calculated the most probable maximum flood discharge. The result of this study shows that synthesized unit hydrograph method is more accurate and applicable way to com pute design flood for ungauged small river basins.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.33-33
• /
• 2001

The physical properties and the dyeability of the easily dyeable polyester yarn(EDY) were investigated and compared with those of regular polyester (REG-PET). The EDY, copolymerized with small amount of polyethylene glycol(PEG), showed higher intensity of aliphatic CH peak in IR spectrum, lower density and lower compactness than those of the REG-PET from the analysis of IR, density gradient column and XRD respectively. In the physical properties, the EDY has lowers $T_g,\;T_m$, specific stress and initial modulus, and also has higher strain than that of the REG-PET. The EDY can be dyed under atmospheric pressure and its dyeing rate was faster than REG-PET due to low $T_d$, and this seems to be caused by the increased flexibility of Polymer chain in amorphous region of the EDY due to the copolymerization of PEG.ns being within the experimental error, the average values of lifetim.
$\tau$(t) are taken for further calculations. Rate constants such as Stern-Volmer quenching constants K$_{sv}$, quenching rate parameters k$_q$ and k''$_q$, static quenching constant V and kinetic distance r are determined using the modified Stern-Volmer eq.
tion and sphere of action static quenching model. In order to see whether the reactions are diffusion limited, equations k$_q$ = e$^{-Eq/RT}$ and k''$_q$ = e$^{-Eq/RT}$ are used to determine the values of E$_q$ and E''$_q$, the activati.
energies for collisional quenching and the values of E$_q$ are 14.53, 17.28 and 16.20 kJ mole$^{-1}$ for MPNO1, MPNO2 and 2-PI respectively and the values of E''$_q$ are 14.62 and 17.73 for MPNO1 and MPNO2 respectively. From the magnitudes of various quantities it has.
een concluded that the reactions are diffusion limited and the observed positive deviations in the S-V plot are due to static and dynamic quenching.

• The Korean Journal of Pharmacology
• /
• v.12 no.1
• /
• pp.45-55
• /
• 1976

The effect of positive inotropic agents on the contractile properties of myocardial muscle were studied in the cat papillary muscle preparation. For the purpose, the effects of ouabain $(1{\times}10^{-6}g/ml)$, norepinephrine (0.05r/m1) and Aconiti tuber butanol fraction (AF(5), $1{\times}10^{-4}$, $5{\times}10^{-4}$, $1{\times}10^{-3}$, $2{\times}10^{-3}g/ml$) on the contractile dynamics of the papillary muscle preparation isolated from right ventricle of cat were observed in terms of the characteristics of isometric twitch and the lengh-tension relation, the force-velocity relation and the load-extension relation of the series elastic component of contractile model of A.V. Hill. All the studied inotropic drugs similary increased the rate and the intensity of the developed isometric tension, while shortened the time from onset of contraction to peak tension and the total duration of contraction. In the afterloaded simultaneous isotonic and isometric contraction, they also similary increased the maximal velocity of shortening accompanied with the increasing the maximum developed force. In the load-extension relation all the drugs, however, had no appreciable influence on the properties of the series elastic component. Increasing the concentration, Aconiti tuber butanol fraction produced more pronounced effect on all the studied parameters of isometric and isotonic contraction of cat papillary muscle preparation. From the aspect of contractile dynamics, it seemed that the positive inotropic effect of ouabain, norepinephrine and Aconiti tuber butanol fraction are similary achieved through an influence on the behavior of the contractile component only.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.223-230
• /
• 2011

The purpose of this study was to analysis the effect of form and hardness of outsoles on the motion of the lower extremity joints and on foot pressure during gait. The subjects were 15 women(mean age, $48.5{\pm}2.4$ years), who had no serious musculoskeletal, coordination, balance or joint/ligament problems within 1 year prior to the study. The pelvic tilt, joint angles at the lower extremities and the vertical ground reaction force(GRF) were compared during gait with 3 types of shoes (A, B, C) by using one-way repeated ANOVA(p<.05). During gait, the peak tilt angle and the range of motion(ROM) of the ankle and knee joints were found to be significantly different among the 3 types of shoes. The type C shoes showed a significantly lower mean second maximum vertical GRF than types A and B. The curved outsoles of type C shoes, which had a form and hardness different from those of A and B, was designed strategically for walking shoes to provide stability to the Additionally, type C induced the dispersion of eccentric pressure and made the center of pressure roll over to the center line of the foot.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.343-350
• /
• 2011

The compliance and stiffness of artery are closely related with disease of arteries. Pulse wave velocity(PWV) in the blood vessel is a basic and common parameter in the hemodynamics of blood pressure and blood flow wave traveling in arteries because the PWV is affected directly by the conditions of blood vessels. However, there is no standardized method to measure the PWV and it is difficult to measure. The conventional PWV measurement has being done by manual calculation of the pulse wave transmission time between coronary arterial proximal and distal points on a strip chart on which the pulse wave and ECG signal are recorded. In this study, a pressure sensor consisting of strain gauges is used to measure the blood pressure of arteries in invasive method and regular ECG electrodes are used to record the ECG signal. The R-peak point of ECG is extracted by using a reference level and time windowing technique and the ascending starting point of blood pressure is determined by using differentiation of the blood pressure signal and time windowing technique. The algorithm proposed in this study, which can measure PWV automatically, shows robust and good results in the extraction of feature points and calculation of PWV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2010

A compact circular microstrip patch antenna with a switchable circular polarization(CP) is proposed at 2.4 GHz. An unequal cross-shaped slot on a ground plane is utilized as a perturbation. By switching pin diodes mounted on the slot, the CP sense of each antenna can be simply switched from left-handed(LH) CP to right-handed(RH) CP vice versa. Since the perturbation can be made on the ground plane and no bias circuit is required on the patch side, the bias circuit has not effect on the main beam radiation. From the experimental results, the impedance bandwidth and CP bandwidth of the proposed antenna have shown up to 150 MHz and 35 MHz, respectively. The peak gain of the proposed antenna is 1.7 dBi for both CP senses.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.23 no.2
• /
• pp.163-173
• /
• 2020

Purpose: This study aimed to investigate the clinical and metabolic determinants of circulating soluble leptin receptor (CSLR) and free leptin index (FLI) in pre-pubertal obese male children. Methods: We conducted a preliminary cross-sectional study at three tertiary hospitals and one public primary school. Eighty obese male children without growth and developmental abnormalities aged 5-9 years were recruited. In these children, obesity was solely caused by excessive food intake, and not by acute illness, medications, endocrine abnormalities, or any syndrome. Body mass index (BMI), body fat mass, carbohydrate intake, fat intake, high density lipoprotein cholesterol level, low density lipoprotein cholesterol level, triglyceride level, and Homeostatic Model Assessment for Insulin Resistance are the potential determinants for leptin regulation, which is represented by CSLR level and FLI. Results: Carbohydrate was the main source of energy. BMI and body fat mass had negative weak correlation with CSLR and positive weak correlation with FLI. Furthermore, carbohydrate intake was found to be independently associated with CSLR based on the results of the multiple linear regression analysis. Following an increase in carbohydrate intake, CSLR level decreased progressively without any negative peak. Conclusion: Leptin regulation in prepubertal obese male children is associated with body composition and dietary intake. Carbohydrate intake is useful for predicting CSLR. Lipid profiles and insulin resistance are not related to both CSLR and FLI. Treatment and prevention of leptin resistance in obese children should focus on reducing BMI, fat mass, and carbohydrate intake.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.108-113
• /
• 2013

Objectives: Although several cases of lung diseases caused by indium have been reported in Japan, the United States and China, South Korea, which is estimated to have been the world's largest consumer of indium, has not yet established a criteria for the diagnosis of lung diseases caused by indium exposure. In this study, we tried to determine the applicability of the Krebs von den lungen-6, which has been widely recognized for its use with interstitial lung disease in Japan, as a biological exposure index for indium. Methods: Methods: The analysis of indium in serum was conducted by inductively coupled plasma mass spectrometry and the analysis of KL-6 in serum was carried out using enzyme-linked immunosorbent assay kit. Results: The indium levels in serum were distributed from below the detection limit to a peak of $125.78{\mu}g/L$, and the values of the KL-6 were distributed from 104.5 U/mL to 2162.2 U/mL. The serum indium and KL-6 showed good correlation ($R^2$=0.389,pfortrend=0.000) and smoking did not affect the KL-6. Conclusions: The usefulness of KL-6 as a specific biomarker for interstitial lung disease has been recognized. In addition, it is expected that effective prevention of health problems can be achieved by determining the lung-damage progress at an early stage according to individual susceptibility.