• Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.6.1-6.10
• /
• 2018

The intention of this study was to identify the bacterial pathogens infecting Oreochromis niloticus (Nile tilapia) and Clarias gariepinus (African catfish), and to establish the antibiotic susceptibility of fish bacteria in Uganda. A total of 288 fish samples from 40 fish farms (ponds, cages, and tanks) and 8 wild water sites were aseptically collected and bacteria isolated from the head kidney, liver, brain and spleen. The isolates were identified by their morphological characteristics, conventional biochemical tests and Analytical Profile Index test kits. Antibiotic susceptibility of selected bacteria was determined by the Kirby-Bauer disc diffusion method. The following well-known fish pathogens were identified at a farm prevalence of; Aeromonas hydrophila (43.8%), Aeromonas sobria (20.8%), Edwardsiella tarda (8.3%), Flavobacterium spp. (4.2%) and Streptococcus spp. (6.3%). Other bacteria with varying significance as fish pathogens were also identified including Plesiomonas shigelloides (25.0%), Chryseobacterium indoligenes (12.5%), Pseudomonas fluorescens (10.4%), Pseudomonas aeruginosa (4.2%), Pseudomonas stutzeri (2.1%), Vibrio cholerae (10.4%), Proteus spp. (6.3%), Citrobacter spp. (4.2%), Klebsiella spp. (4.2%) Serratia marcescens (4.2%), Burkholderia cepacia (2.1%), Comamonas testosteroni (8.3%) and Ralstonia picketti (2.1%). Aeromonas spp., Edwardsiella tarda and Streptococcus spp. were commonly isolated from diseased fish. Aeromonas spp. (n = 82) and Plesiomonas shigelloides (n = 73) were evaluated for antibiotic susceptibility. All isolates tested were susceptible to at-least ten (10) of the fourteen antibiotics evaluated. High levels of resistance were however expressed by all isolates to penicillin, oxacillin and ampicillin. This observed resistance is most probably intrinsic to those bacteria, suggesting minimal levels of acquired antibiotic resistance in fish bacteria from the study area. To our knowledge, this is the first study to establish the occurrence of several bacteria species infecting fish; and to determine antibiotic susceptibility of fish bacteria in Uganda. The current study provides baseline information for future reference and fish disease management in the country.

• Food Science and Preservation
• /
• v.20 no.5
• /
• pp.712-719
• /
• 2013

This study was conducted to investigate the antibacterial activity of lactic acid bacteria isolated from traditional fermented foods and to develop a new starter for fermented milk. The isolates were identified using 16S rDNA sequencing and named Lactobacillus plantarum A, Leuconostoc lactis B and L. acidophilus C. The activity of these strains to inhibit the growth of food-borne human pathogens (Escherichia coli NCTC 12923, Salmonella Typhimurium NCTC 12023, Listeria monocytogenes NCTC 11994) was measured using the paper disc method. All these strains showed strong antibacterial activity against Li. monocytogenes NCTC 11994. The experiment groups were the fermented milks with these strains, and the control group was the fermented milk with the commercial starter (ABT 5). The change of pH, acidity and viable cell counts were measured during their aging time. All the experiment groups showed a significant difference in their aging times compared to the control group. However, the sensory test showed that the experiment groups can be used as useful starters for fermented milk. This result suggests that L. plantarum A, Leu. lactis B and L. acidophilus C have the potential to be developed as new starters for fermented milk.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.232-237
• /
• 2015

The water supplied from dental unit water systems (DUWS) in dentistry may be heavily contaminated with bacteria and thus may be a potential source of infection for both practice staff and patients. The aim of this study was to evaluate the level of heterotrophic bacteria and to confirm the presence of opportunistic pathogens from DUWS in student clinical simulation laboratory of college of dentistry. Water samples were collected from 36 ultrasonic scalers in student clinical simulation laboratory. The levels of heterotrophic bacteria in water samples were quantified by counting colony forming units (CFUs) on R2A agar media. In addition, opportunistic pathogens were detected by using the polymerase chain reaction (PCR) method. The mean CFUs were 16,095 CFU/ml for water samples and all of water samples exceeded current American Dental Association recommendations of 200 CFU/ml. Pseudomonas species and non-tuberculous Mycobacterium species were detected in the one sample and two samples, respectively, among the 36 water samples by the PCR with specific primers for these bacteria. Our study indicated that DUWS in student clinical simulation laboratory can cause potential infection in students and participants. This study suggested the dental unit water line management and wearing personal protective equipment in student clinical simulation laboratory will be needed to reduce bacterial contamination.

• Corrosion Science and Technology
• /
• v.8 no.4
• /
• pp.162-169
• /
• 2009

Pure titanium and its alloys are drastically used in implant materials due to their excellent mechanical properties, high corrosion resistance and good biocompatibility. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus than cortical bone. Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. For this reason, Ti-30Ta-xZr alloy systems have been studied in this study. The Ti-30Ta containing Zr(5, 10 and 15 wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24 hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and Ti coating and then coated with TiN, respectively, by using DC magnetron sputtering method. The analyses of coated surface were carried out by field emission scanning electron microscope(FE-SEM). The electrochemical characteristics were examined using potentiodynamic (- 1500 mV~+ 2000 mV) and AC impedance spectroscopy(100 kHz~10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The equiaxed structure was changed to needle-like structure with increasing Zr content. The surface defects and structures were covered with TiN/Ti coated layer. From the polarization behavior in 0.9% NaCl solution, The corrosion current density of Ti-30Ta-xZr alloys decreased as Zr content increased, whereas, the corrosion potential of Ti-30Ta-xZr alloys increased as Zr content increased. The corrosion resistance of TiN/Ti-coated Ti-30Ta-xZr alloys were higher than that of the TiN-coated Ti-30Ta-xZr alloys. From the AC impedance in 0.9% NaCl solution, polarization resistance($R_p$) value of TiN/Ti coated Ti-30Ta-xZr alloys showed higher than that of TiN-coated Ti-30Ta-xZr alloys.

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.752-759
• /
• 2016

The objective of this study was to describe the growth patterns of Staphylococcus aureus in combinations of NaCl and $NaNO_2$, using a probabilistic model. A mixture of S. aureus strains (NCCP10826, ATCC13565, ATCC14458, ATCC23235, and ATCC27664) was inoculated into nutrient broth plus NaCl (0, 0.25, 0.5, 0.75, 1, 1.25, 1.5, and 1.75%) and $NaNO_2$ (0, 15, 30, 45, 60, 75, 90, 105, and 120 ppm). The samples were then incubated at 4, 7, 10, 12 and $15^{\circ}C$ for up to 60 d under aerobic or vacuum conditions. Growth responses [growth (1) or no growth (0)] were then determined every 24 h by turbidity, and analyzed to select significant parameters (p<0.05) by a stepwise selection method, resulting in a probabilistic model. The developed models were then validated with observed growth responses. S. aureus growth was observed only under aerobic storage at $10-15^{\circ}C$. At $10-15^{\circ}C$, NaCl and $NaNO_2$ did not inhibit S. aureus growth at less than 1.25% NaCl. Concentration dependency was observed for NaCl at more than 1.25%, but not for $NaNO_2$. The concordance percentage between observed and predicted growth data was approximately 93.86%. This result indicates that S. aureus growth can be inhibited in vacuum packaging and even aerobic storage below $10^{\circ}C$. Furthermore, $NaNO_2$ does not effectively inhibit S. aureus growth.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.5
• /
• pp.331-338
• /
• 2006

A rapid, selective and sensitive reverse-phase HPLC methods for the determination of atenolol and chlorthalidone in human serum and whole blood were validated, and applied to the pharmacokinetic study of atenolol and chlorthalidone combination therapy. Atenolol and an internal standard, pindolol, were extracted from human serum by liquid-liquid extraction, and analyzed on a $\mu$-Bondapak C18 $10-{\mu}$ column in a mobile phase of methanol-0.01 M potassium dihydrogenphosphate(30:70, v/v, adjusted to pH 3.5) and fluorescence detection(emission: 300 nm, excitation: 224 nm). Chlorthalidone and an internal standard, probenecid, were extracted form human whole blood by liquid-liquid extraction, and analyzed on a Luna C18 $5-{\mu}$ column in a mobile phase of acetonitrile containing 77% 0.01 M sodium acetate and UV detection at 214 nm. These analysis were performed at three different laboratories using the same quality control(QC) samples. The chromatograms showed good resolution, sensitivity, and no interference by human serum and whole blood, respectively. The methods showed linear responses over a concentration range of 10-1,000 ng/mL for atenolol and 0.05-20 ${\mu}g/mL$ for chlorthalidone, with correlation coefficients of greater than 0.999 at all the three laboratories. Intra- and inter-day assay precision and accuracy fulfilled international requirements. Stability studies(freeze-thaw, short-, long-term, extracted sample and stock solution) showed that atenolol and chlorthalidone were stable. The lower limit of quantitation of atenolol and chlorthalidone were 10 ng/mL and 0.05 ${\mu}g/mL$, respectively, which was sensitive enough for pharmacokinetic studies. These methods were applied to the pharmacokinetic study of atenolol and chlorthalidone in human volunteers following a single oral administration of Hyundai $Tenoretic^{\circledR}$ tablet(atenolol 50 mg and chlorthalidone 12.5 mg) at three different laboratories.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2001

Objectives : To gather information about the factors which influence the interest and intention of admission into charging nursing hones for the elderly(CNH), as these homes represent an important method for resolving the problems related to the rapid population aging occurring in Korea. Methods : A face-to-face interview survey was carried out with 320(men 159, women 165) patients over 60 years old who were admitted at 2 university hospitals and 5 general hospitals in the Busan area between December 1998 and March 1999. Data were analyzed through t-test, ANOVA, correlation and multiple regression analysis. Results : The mean age and years of education of the study population was 67.0 and 7.7 years, and the types of chronic degenerative disease included musculoskeletal disorders(20.1%), cerebrovascular disease(17.1%), and diabetes(14.3%). The major forms of household living arrangement prior to admission were elderly alone(22.6%), and elderly couple(33.5%), while about half of them(55.5%) didn't want to live with their children id the future. Almost half were paying medication fees by themselves(46.6%). The level of actual intention of admission$(3.07{\pm}1.39)$ into a CNH was lower than that of interest$(3.22{\pm}1.33)$(p<0.01). Multiple analysis revealed that the intention of admission increased with decreasing number of future supportive persons$(\beta=-0.107)$, lower level of activity in daily life$(\beta=-0.447)$, and longer years of education$(\beta=-0.447)$ with 32.7% of $R^2$. As for the factors which determined the admission into a CNH, the fee and facilities were considered to be most important, and professional nursing and physician's care were the most desired services. In nomenclature, they preferred 'elderly hospital' or 'elderly health center' to CNH. Conclusions : Interest in CNH is increasing recently, but existing studies about patient experiences in CHN are still limited. This study may form a basis for future examinations of the needs and uses for CNH. Active financial support and public information are considered by the authors to be important factors for the induction of welfare services for the elderly, though CNH.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.125-131
• /
• 1983

Formal net charges, bond populations, atomic orbital coefficients, energy components and conformation of dimethyl-2,2-dichlorovinylphosphate have been studied theoretically by using the CNDO/2 molecular orbital calculation method in attempt to describe the reactivity and the stability of the molecule. From the analysis of rate equation, molecular orbital calculations and identification of the hydrolysis products, 2,2-dichloroacetaldehyde and dimethylphosphoric acid, a mechanism of the hydrolysis of dimethyl-2,2-dichlorovinylphosphate(DDVP) has been proposed. The hydrolysis of DDVP proceeds through the mechanism of nucleophilic addition, typical Micheal reaction in basic media. Therefore, it appears probable that the attack by strong nucleophile, hydroxide ion occurs at the increased positive charge $C_2({\alpha})$ atom of a staggered conformation due to the inductive effect (-)I>(+)R of 2,2-dichlorovinyl, electron-attracting group. And then, the hydrolytic scission involves the $C_2({\alpha})-O_3$, ${\pi}-anti-bonding\;orbital({\pi}^*)$ in the subsequent reaction in aqueous solution.

• Korean Journal of Materials Research
• /
• v.19 no.1
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.