• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제28회 학술발표회 초록집
• /
• pp.118-118
• /
• 2005

• 한국세라믹학회지
• /
• 제38권4호
• /
• pp.307-307
• /
• 2001

Combustion process with citrate was used to produce the LiMn$_2$O$_4$powder. Precursors are pre-ignited in open air followed by post-heating in the range from $600^{\circ}C$ to 80$0^{\circ}C$ for 4h. With varying the molar ratio (R) of ethylene glycol (EG) to citric acid (CA) from 0 to 4, the effect of EG content on powder characteristics is evaluated. Vacuum drying promote the auto-ignition at room temperature. With small addition of EG metal ion was selectively segregated with organic substances and undesired lithium evaporation occurred during post-heating. LiMn$_2$O$_4$phase which is produced by combustion reaction was decomposed back to Mn$_3$O$_4$because the reaction temperature was higher than 95$0^{\circ}C$. With increasing EG content, the homogeneity of LiMn$_2$O$_4$powder increased and specific surface area increased. And lithium evaporation during vacuum drying and/or ignition also increased.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.133-133
• /
• 1999

We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-T$_c$ superconducting (HTS) YBa$_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height t/h. The spread of step-edge junction parameters was measured from each13 junctions with t/h=l/3, l/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K..

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.31-35
• /
• 1999

We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-$T_c$ superconducting (HTS) $YBa_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed on the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height, t/h. The spread of step-edge junction parameters was measured from each 13 junctions with t/h=1/3, 1/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.78-86
• /
• 2014

Since cellulose nanofibrils (CNF) has large specific surface area and high water holding capacity, it is very difficult task to remove water from the CNF suspension. However, dewatering of CNF suspension is a prerequisite of following processes such as mat forming and drying for the application of CNF. In this study, we evaluated the drainage of cellulose fibers suspension under vacuum and pressure conditions depending on the number of grinding passes. Also, the effect of the addition of cationic polyelectrolyte on dewatering ability of CNF suspension was investigated. Regardless of dewatering condition, the total drained water amount as well as the drainage rate were decreased with an increase in the number of grinding passes. Pressure dewatering equipment enables us to prepare wet CNF mat with relatively higher grammage. The cationic polyelectrolytes improved the dewatering ability of CNF suspension by controlling the zeta potential of CNF. The fast drainage was obtained when CNF suspension had around neutral zeta potential.

• 한국주조공학회지
• /
• 제32권6호
• /
• pp.261-268
• /
• 2012

The effects of thickness, base element and additive to inoculant on the number of eutectic cells and chill depth of thin-section gray cast iron were investigated. Meanwhile the number of eutectic cells increased by inoculation, chill depth decreased. The former decreased and the latter increased by holding the melt at the temperature range between 1,450 and $1,500^{\circ}C$. The former was more for the thinner casting with the thickness of 5 mm than the other. The result of thermal analysis coincided well with the change of macrostructure. The former increased and the latter decreased with the increased contents of carbon, silicon and the silicon content by inoculation. The former decreased and the latter increased with increased manganese content. The number of eutectic cells decreased as the amounts of rare earth and the bismuth added to this inoculant increased. With the addition of sulfur of 0.10 wt% of the weight of this inoculant, the maximum number of eutectic cells was obtained.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.9-17
• /
• 2001

The floc characteristics of base paper stock for coating by the retention aid system consisting of polyacrylamide (high molecular weight low charge density, HMLC) and PEI without and with anionic inorganic oxide (IO) were investigated under various shear conditions of MDDA (modified dynamic drainage analyzer). The floc size was increased with cationic electrolytes dosage whatever inorganic oxide is applied or not. The effect of inorganic oxide on the floc size showed the different result between PAM and PEI. The smaller floc was obtained by PAM without inorganic oxide, but larger floc was obtained by PAM with inorganic oxide. However, the effect of shear force was not observed. Floc formation index was decreased by the addition of cationic electrolytes with or without inorganic oxide. Floc formation index had better correlation format formation index than floc size. The relationships between wet web permeability and mat air permeability showed the significant linear correlation ($R^2$=0.97~0.98) for HML PAM and PEI. Floc formation index gave more useful information than the retention measurement when the performance of retention aids is evaluated at the laboratory before applying at the paper mill.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.3875-3891
• /
• 2021

In this study, a Velostat pressure sensor was manufactured to develop a plantar pressure measurement system and a C#-based application was developed to monitor and collect plantar pressure data in real time. In order to evaluate the characteristics of the proposed plantar pressure measurement system, the accuracy of plantar pressure index and personal classification was verified by comparing with MatScan, a commercial plantar pressure measurement system. As a result, the output characteristics according to the weight of the Velostat pressure sensor were evaluated and a trend line with the reliability of r² = 0.98 was detected. The Root Mean Square Error(RMSE) of the weighted area was 11.315 cm², the RMSE of the x coordinate of Center of Pressure(CoP_x) was 1.036 cm and the RMSE of the y coordinate of Center of Pressure(CoP_y) was 0.936 cm. Finally, inaccuracy of personal classification, the proposed system was 99.47% and MatScan was 96.86%. Based on the advantage of being simple to implement and capable of manufacturing at low cost, it is considered that it can be applied to various fields of measuring vital signs such as sitting posture and breathing in addition to the plantar pressure measurement system.

• 아시안잔디학회지
• /
• 제24권2호
• /
• pp.165-169
• /
• 2010

Fusarium circinatum은 소나무류에 푸사리움 가지마름병을 유발하는 병원균으로 알려져 있다. 본 연구에서는 골프장의 리기다소나무로부터 병원균을 분리하였으며, 이들의 형태적인 특성을 관찰하고 분자생물학적인 방법을 이용하여 동정한 결과 F. circinatum 임을 확인하였다. 특히 histone H3 유전자와 IGS rDNA의 염기서열을 분석한 결과 분리된 균들의 염기서열은 동일하였으며, 유성생식(mating)에 관여하는 유전자를 분석한 결과 모두 MAT1-1 유형임을 확인하였다. 또한 푸사리움 가지마름병에 대한 감수성 수종인 리기다소나무를 비롯하여 저항성 수종인 잣나무와 소나무의 메탄올 추출물을 만들어 이들의 병원균에 대한 항균력을 검정하였다. 그 결과 저항성 수종인 잣나무와 소나무의 추출물에서 리기다소나무 보다 높은 항균력을 확인 하였다.

• 정보과학회 논문지
• /
• 제43권8호
• /
• pp.910-918
• /
• 2016

많은 종류의 데이터들은 텐서로 표현될 수 있다. 텐서란 다차원 배열을 의미하며, 그 예로 (사용자, 사용자, 시간)으로 이루어진 소셜 네트워크 데이터가 있다. 이러한 다차원 데이터 분석에 있어서 텐서 생성기는 시뮬레이션, 다차원 데이터 모델링 및 이해, 샘플링/외삽법 등 다양한 응용이 가능하다. 하지만, 존재하는 텐서 생성기들은 실제 세계의 텐서처럼 멱 법칙을 따르는 특성과 희박성을 갖는 텐서를 생성할 수 없다. 또한, 처리가능한 텐서 크기에 한계가 존재하고, 분산시스템에서 추가 분석을 하려면 텐서를 분산시스템에 업로드 하는 추가비용이 든다. 본 논문은 분산 테라스케일 텐서 생성기(TeT)를 제안함으로써 이러한 문제를 해결하고자 한다. TeT는 희박성을 갖는 랜덤 텐서와 희박성과 멱 법칙을 따르는 특성을 갖는 Recursive-MATrix 텐서, 크로네커 텐서를 크기 제한없이 생성할 수 있다. 또한, TeT에서 생성된 텐서는 같은 분산 시스템에서 추가적인 텐서분석이 가능하다. TeT는 효율적인 설계로 인해 거의 선형적인 머신확장성을 보인다.