• Nuclear Engineering and Technology
• /
• v.45 no.3
• /
• pp.323-334
• /
• 2013

During a hypothetical core-disruptive accident (CDA) in a sodium-cooled fast reactor (SFR), degraded core materials can form roughly conically-shaped debris beds over the core-support structure and/or in the lower inlet plenum of the reactor vessel from rapid quenching and fragmentation of the core material pool. However, coolant boiling may ultimately lead to leveling of the debris bed, which is crucial to the relocation of the molten core and heat-removal capability of the debris bed. To clarify the mechanisms underlying this self-leveling behavior, a large number of experiments were performed within a variety of conditions in recent years, under the constructive collaboration between the Japan Atomic Energy Agency (JAEA) and Kyushu University (Japan). The present contribution synthesizes and gives detailed comparative analyses of those experiments. Effects of various experimental parameters that may have potential influence on the leveling process, such as boiling mode, particle size, particle density, particle shape, bubbling rate, water depth and column geometry, were investigated, thus giving a large palette of favorable data for the better understanding of CDAs, and improved verifications of computer models developed in advanced fast reactor safety analysis codes.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.119-124
• /
• 2009

In this paper, AMR-WB+ audio coder is implemented, in real-time, using Intel 400MHz Xscale PXA250 with 32bit RISC processor ARM9E-J(R)core. The assembly code for ARM9E-J(R)core is developed through the serial process of C code optimization, cross compile, assembly code manual optimization and adjusting the optimized code to Embedded Visual C++ platform. C code is trimmed on Visual C++ platform. Cross compile and assembly code manual optimization are performed on CodeWarrior with ARM compiler. Through these stages the code for both ARM EVM board and PDA is implemented. The average complexities of the code are 160.75MHz on encoder and 33.05MHz on decoder. In case of static link library(SLL), the required memories are 65.21Kbyte, 32.01Kbyte and 279.81Kbyte on encoder, decoder and common sources, respectively. The implemented coder is evaluated using 16 test vectors given by 3GPP to verify the bit-exactness of the coder.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.185-196
• /
• 2010

Korea is presently the leading country in global desalination industry and has been investing a large amount of money and human resources in development of new core technologies to increase its' share of global market. In this paper, we reviewed world-wide trends of the advanced water industry and outlined various seawater desalination technologies developed so far. We also made some analysis on the directions and results of the government-lead R&D sponsorship in the field of seawater-freshening technology. Present studies showed that we need an institutional strategy to help domestic companies guarantee the credibility of the technologies developed by themselves based upon their experience of plant operation. Futhermore, strategic R&D programs to develope original technologies and localization of key components for desalination plants should be preceded in the near future.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.393-394
• /
• 2004

To get rid of cell assembly margin and have more process room of upper substrate, we developed truly COT (Color Filter On TFF Array) LCDs in that B/M (Black Matrix) as well as C/F (Color Filter) layer is located on TFT substrate. Novel B/M material is also developed for this COT structure. Difficulty in making contact hole through C/F layer was solved by making each C/F pattern isolated from others. We think this configuration will be core technology for prominent COT LCDs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• Steel and Composite Structures
• /
• v.24 no.2
• /
• pp.151-176
• /
• 2017

This paper deals with general equations of motion for free vibration analysis response of thick three-layer doubly curved sandwich panels (DCSP) under simply supported boundary conditions (BCs) using higher order shear deformation theory. In this model, the face sheets are orthotropic laminated composite that follow the first order shear deformation theory (FSDT) based on Rissners-Mindlin (RM) kinematics field. The core is made of orthotropic material and its in-plane transverse displacements are modeled using the third order of the Taylor's series extension. It provides the potentiality for considering both compressible and incompressible cores. To find these equations and boundary conditions, Hamilton's principle is used. Also, the effect of trapezoidal shape factor for cross-section of curved panel element ($1{\pm}z/R$) is considered. The natural frequency parameters of DCSP are obtained using Galerkin Method. Convergence studies are performed with the appropriate formulas in general form for three-layer sandwich plate, cylindrical and spherical shells (both deep and shallow). The influences of core stiffness, ratio of core to face sheets thickness and radii of curvatures are investigated. Finally, for the first time, an optimum range for the core to face sheet stiffness ratio by considering the existence of in-plane stress which significantly affects the natural frequencies of DCSP are presented.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.134-136
• /
• 2003

This paper proposes moving mechanism theory & magnetic core analysis regarding mini magnetic contactor and differential mechanism & bimetal analysis regarding mini thermal overload relay. In shortage of technique, we have experienced many difficulties in magnetic switch development. By this research, we developed core parts about mini magnetic switch and applied the results to optimum mini magnetic switch development

• Journal of Technology Innovation
• /
• v.15 no.1
• /
• pp.87-113
• /
• 2007

For the realization of the national self-defense, the trend of the defense R&D projects becomes global and diverse with the increase of their budget. Thus, for the effective execution of the budget and the successful performance of the projects, the importance of selection, management and evaluation of the R&D projects is emphasized. This study suggests the applicability of a meta-evaluation model for the realization of the successful defense R&D project evaluation system. This study focused on the development of the meta-evaluation model design which can be applicable to the national defense R&D projects. Using the proposed meta-evaluation model, we propose a technique to enhance the fairness and the reliability of the national defense R&D projects evaluation system.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.3
• /
• pp.373-390
• /
• 2003

With limited resources, proper allocation of the national R&D budget is very crucial matter for reinforcing the national competence, and the importance of selecting strategic R&D fields have been increasingly emphasized by technology policy-makers and CTOs. This paper deals with technology relevance/cluster analysis, which measures technological dependency and relevancy among technologies, and how it can be used for selecting the strategic R&D fields especially satisfying SMEs(small and medium enterprises)' specific needs. As a result of this study, technology-product tree composed of 7 major technology fields, 22 clusters, 41 groups, 335 core-need technologies and hundreds of related business items are produced that can be used for designing SMEs' R&D/business portfolio as well as R&D investment decision-making of the Ministry of Small and Medium Business Administration.

• Journal of Korean Clinical Nursing Research
• /
• v.21 no.1
• /
• pp.67-79
• /
• 2015

Purpose: The study was aimed to describe the relationships between ego-resilience, disaster experience, and core competencies among emergency room (ER) nurses. Methods: Data were collected from ER nurses in Incheon and Kyunggi province from May to June 2014. Data were analyzed with descriptive study, t-test, ANOVA, and Pearson's correlation coefficient using SPSS/WIN 18.0 version. Results: Male respondents showed significantly higher ego-resilience than female respondents (t=-2.04, p=.043), and education (F=4.96, p=.002) and position (F=7.70, p=.001) were statistically significant. The differences in disaster experience was found in gender (t=-2.29, p=.023), age (F=4.25, p=.006), marital status (t=-2.02, p=.045), education (F=6.34, p<.001), religion (F=3.69, p=.015), and position (F=3.55, p=.031). Regarding core competencies for disaster nursing, age (F=7.80, p<.001), marital status (t=-3.00, p=.001), education (F=16.53, p<.001), career (F=5.40, p<.001), position (F=12.52, p<.001) were significantly different. Positive associations were found between core competencies for disaster nursing and ego-resilience (r=.66, p<.001), disaster experience and core competencies for disaster nursing (r=.52, p<.001), and disaster experience and ego-resilience (r=.33, p<.001). Conclusion: Core competencies were higher among ER nurses when they have higher ego-resilience, and more disaster experience. This finding suggests the need for improving ego-resilience among ER nurses. In addition, disaster education needs to be considered as a part of core nursing curriculum in college and clinical settings.