• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.91-91
• /
• 2004

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.436-436
• /
• 2004

• 대한물리의학회지
• /
• 제8권3호
• /
• pp.417-424
• /
• 2013

PURPOSE: We investigated the relationship between the segment of erector spinae during a core stability exercise according to visual control. METHODS: The subjects of this study were 20 healthy students. An 8-channel electromyograph was used to measure muscle activities of the erector spinae by segment(cervical, thoracic and lumbar) during a core stability exercise according to visual control. The collected data were analyzed using the independent t-test and Pearson-test. RESULTS: The activity of the erector spinae for all segment was higher without the vision than with. The activity of right cervical erector spinae was significantly increased by increasing the activity of the left thoracic erector spinae during a core stability exercise with vision (r= .555). The activity of left thoracic erector spinae was significantly increased by increasing the activity of the left lumbar erector spinae during a core stability exercise without vision (r= .472). CONCLUSION: There was a positive correlation between the cervical and thoracic segment of erector spinae during a core stability exercise with vision. There was a positive correlation between the thoracic and lumbar segment of erector spinae during a core stability exercise without vision.

• 한국응급구조학회지
• /
• 제21권3호
• /
• pp.35-48
• /
• 2017

Purpose: The purpose of the study was to investigate the core competency of disaster management of 119 paramedics. Methods: A self-reported questionnaire was completed by 242 paramedics in C area from April 28 to May 12, 2017. The study instrument included general characteristics of the subjects (4 items), disaster experience, recognition, and preparedness (20 items), and importance and performance of disaster management core competency (24 items) by Likert 5-point scale. Data were analyzed using t-test, ANOVA, Pearson's correlation coefficient using IBM SPSS 24.0. Results: The seriousness of personal disaster was 4.02 points and the importance of disaster-related education was 4.28 points. The importance to core competency of disaster management was 4.39 points and the ability to perform core competency was 3.58 points. The seriousness of personal disaster and the importance of disaster-related education were positively correlated (r=.600, p=.000). The importance and ability to perform core competency were positively correlated (r=.389, p=.000). Conclusion: It is necessary to strengthen core competency of disaster management in paramedics who are the first defense line of disaster.

• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.30-40
• /
• 2004

Purpose : The purpose of this study was aimed to compare the shear bond strength on dentin of three dentin bonding agents and two resin cements used in conjunction with self-cured composite resin core material. Material and method : Control group and six experimental groups were divided for this study. Control group was designated as specimens bonded with Tenure$ A&B^{(R)}$. Experimental groups were as follows : PB-BL group : specimens bonded with Prime&Bond $NT^{(R)}$, $BondLink^{(R)}$ SB-BL group : specimens bonded with $^{(R)}$, BondLink$SingleBond^{(R)}$ PB group : specimens bonded with Prime&Bond $NT^{(R)}$ SB group : specimens bonded with $SingleBond^{(R)}$ PF group : specimens bonded with $Panavia-F^{(R)}$ BI group specimens bonded with Bistite $II^{(R)}$ All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, followed by the shear bond strength was tested by universal testing machine. The data was analysed statistically by Mann-Whitney test. Results : 1. For Prime&Bond $NT^{(R)}$ and $SingleBonde^{(R)}$, the shear bond strength was 0.24 MPa and 7.19 MPa each by each, while Tenure $A&B^{(R)}$ group control was measured at 13.93 MPa (p<0.05). Especially for Prime&Bond $NT^{(R)}$ it did not get conjunction with dentin. 2. For Prime&Bond $NT^{(R)}$ and $SingleBond^{(R)}$ using $BondLink^{(R)}$, there was no significant difference as a result of 11.73 MPa and 14.00 MPa each by each (p<0.05). 3. For $Panavia-F^{(R)}$ and Bistite $II^{(R)}$, they showed the highest shear bond strength as measured by 18.24 MPa and 16.09 MPa each (p<0.05).

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.91-97
• /
• 2015

HTPB/AP/Al 계열의 혼합형 열경화 추진제를 적용한 로켓 연구개발에 있어서의 추진제 기계물성 규격을 정하는 일련의 과정을 고찰하고, 공정지수를 통하여 추진제 제조에서의 공정관리를 분석하였다. 이를 근간으로 기계물성간의 종속성을 분석하고 최적화 물성을 제시함으로서 불량률을 제거하는 공정 안전도 향상뿐만 아니라 추진제 그레인의 구조적 안전도 상승에도 기여할 것이다.

• 한국추진공학회지
• /
• 제20권1호
• /
• pp.58-68
• /
• 2016

고체 로켓 모타의 충전을 위한 추진제 믹서는 가장 중요한 장비 중 하나다. 추진제 믹서는 수출통제 품목으로 해외로부터 직접 구입하기 어렵다. 이에 당사에서는 해외 수출 통제(Export Licence) 품목으로 수입이 불가능한 어려운 상황에 대처하기 위해 국산화 개발을 진행하였다. 본 논문을 통해 일반적인 추진제용 믹서의 소개와 당사의 믹서 국산화 개발과정을 나타내었다. 또한, 블레이드-블레이드, 블레이드-보울 벽사이의 간극 측정 및 ADINA 해석을 통해 국산화 개발된 추진제 믹서의 설계를 검증하였으며 개발과제에 적용함을 기술하였다.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.170-172
• /
• 2008

Fe-6.5% Si alloys have good magnetic properties due to their high electrical resistivity, very low magneto-striction, and low crystalline anisotropy. Despite their strong potential, these alloys have seldom been used in magnetic applications because of the very poor ductility of Si-steel above 3.0 wt% Si [1-4]. It is difficult to achieve compressed Fe-6.5% Si powder cores with excellent properties because of the low density due to poor ductility. In compressed powder cores, high density is essential in order to obtain high magnetization and permeability. In this study, an attempt was made to produce Fe-3%Si powder cores because the Fe-3.0 wt% Si alloys have relatively good magnetic properties and room temperature ductility. Gas atomized Fe-3.0 wt% Si powder was compressed into toroid shape cores. By reducing the Si content to 3.0 wt%, the hysteresis loss could be greatly reduced and thus the total core loss could be minimized. The total core loss is 600 mW/$cm^3$ at 0.1 T and 50 kHz.

• Advances in aircraft and spacecraft science
• /
• 제6권2호
• /
• pp.169-187
• /
• 2019

This work presents a practical detailed finite element (FE) approach for the three-dimensional (3D) free-vibration analysis of actual aircraft and spacecraft-type lightweight and thin honeycomb sandwich panels. It consists of calling successively in $MATLAB^{(R)}$, via a developed user-friendly GUI, a detailed 3D meshing tool, a macrocommands language translator and a commercial FE solver($ABAQUS^{(R)}$ or $ANSYS^{(R)}$). In contrary to the common practice of meshing finely the faces and core cells, the proposed meshing tool represents each wall of the actual hexagonal core cells as a single two-dimensional (2D) 4 nodes quadrangularshell element or two 3 nodes triangular ones, while the faces meshes are obtained simply using the nodes at the core-faces interfaces. Moreover, as the same 2D FE interpolation type is used for meshing the core and faces, this leads to an automatic handling of their required FE compatibility relations. This proposed approach is applied to a sample made of very thin glass fiber reinforced polymer woven composite faces and a thin aluminum alloy hexagonal honeycomb core. The unknown or incomplete geometric and materials properties are first collected through direct measurements, reverse engineering techniques and experimental-FE modal analysis-based inverse identification. Then, the free-vibrations of the actual honeycomb sandwich panel are analyzed experimentally under different boundary conditions and numerically using different mesh basic cell shapes. It is found that this approach is accurate for the first few modes used for pre-design purpose.

• 한국통신학회논문지
• /
• 제31권3A호
• /
• pp.368-376
• /
• 2006

본 논문은 OFDM 변복조 모뎀 설계에 핵심 IP로 사용될 수 있는 파라메터화된 FFT/IFFT 코어 생성기 FCore_GenSim(Parameterized FFT Core Generation & Simulation Program)에 대해 기술한다. Fcore_GenSim은 FFT 코어의 Verilog-HDL 모델을 생성하는 parameterized 코어 생성기(PFFT_CoreGen)와 생성된 코어의 연산 정밀도를 분석해주는 fixed-point 시뮬레이터(FXP_FFTSim)로 구성된다. PFFT_CoreGen은 FFT 길이(64점 ~2048점 범위)와 입력/출력/중간결과/격자계수의 word-length(8-b~24-b 범위, 2-b 단위)를 지정하면, 지정된 사양을 갖는 FFT 코어의 Verilog-HDL 모델을 생성하며, 총 43,659 종류의 코어를 생성할 수 있다. 또한, 사용자의 필요에 따라 CBFP(Convergent Block Floating Point) 스케일링의 적용 여부를 지정할 수 있다. 생성되는 코어의 내부 구조는 FFT 길이에 따라 radix-2, radix-2/4, radix-2/4/8 알고리듬의 혼합구조가 적용되도록 하였으며, 또한 CBFP 스케일링의 적용 여부에 따라서도 R2SDF 단일구조 또는 R2SDF/R2SDC 복합구조가 적용되도록 함으로써 생성되는 코어의 회로 복잡도와 성능이 최적화되도록 하였다.