• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.769-776
• /
• 2012

The damage analysis method in this paper needs a material property and failure criteria. The material properties and the failure criteria could be easily obtained from the results of notched bar tensile tests carried out on other materials studied previously. However, for the cast stainless steel (CF8M) material in this paper, because of the variance in the results from notched bar tensile tests under the same conditions, the material property and the failure criteria could be obtained differently, depending on the analyzer. Therefore, a proper procedure that can confirm the material property and failure criteria are needed. In this work, the averaged material property was obtained from the notched bar with a 16-mm notch radius, and three failure criteria for CF8M material by finite element analysis were obtained. Applying the material property and the failure criteria, FE damage analysis for the J-R fracture toughness test was conducted. For validation, the simulated results were compared with the experimental results.

• Bulletin of the Korean Mathematical Society
• /
• v.31 no.2
• /
• pp.187-192
• /
• 1994

The author extended the small properties of topological semilattices to that of regular semigroups [3]. In this paper, it could be shown that a semigroup S is almost regular if and only if over bar RL = over bar R.cap.L for every right ideal R and every left ideal L of S. Moreover, it has shown that the Bohr compactification of an almost regular semigroup is regular. Throughout, a semigroup will mean a topological semigroup which is a Hausdorff space together with a continuous associative multiplication. For a semigroup S, we denote E(S) by the set of all idempotents of S. An element x of a semigroup S is called regular if and only if x .mem. xSx. A semigroup S is termed regular if every element of S is regular. If x .mem. S is regular, then there exists an element y .mem S such that x xyx and y = yxy (y is called an inverse of x) If y is an inverse of x, then xy and yx are both idempotents but are not always equal. A semigroup S is termed recurrent( or almost pointwise periodic) at x .mem. S if and only if for any open set U about x, there is an integer p > 1 such that x$^{p}$ .mem.U.S is said to be recurrent (or almost periodic) if and only if S is recurrent at every x .mem. S. It is known that if x .mem. S is recurrent and .GAMMA.(x)=over bar {x,x$^{2}$,..,} is compact, then .GAMMA.(x) is a subgroup of S and hence x is a regular element of S.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.141-149
• /
• 2009

The objective of this study was to propose a development length equation for bottom and top GFRP bars. Including the bottom and top GRPP bars, a total of 104 modified pullout tests were completed. The test variables were embedment length (15, 30, 45db), net cover thickness (0.5~2.0db), different GFRP bar types, and bar diameters (10, 13, 16mm). The average bond stresses were determined based on the modified pullout test results. Two variable linear regression analyses were performed on the results of the average bond stresses. Utilizing the 5% fractile concept, a conservative development length design equation was derived. The design equation of the development length for bottom and top GFRP bars was proposed and the design equation derived in this study was compared to the ACI 440.1R-06 committee equation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.55-58
• /
• 1999

Plant water status during growth is directly and indirectly associated with seed yield. The objective of the present study was to determine the genotypic differences in leaf water characteristics at an early growth stage of soybean [Glycine max (L.) Merrill] plants through the pressure-bomb technique. Measurements of water potential as well as relative water content (RWC) were made at the third leaf from the fully-expanded top leaf of eight different soybean genotypes grown for 31 to 35 days after field emergence. On the basis of the modified exponential model, pressure-volume (PV) curves were fitted well ($R^2$=0.92＊＊ to 0.99＊＊ for the curvi-linear region and R=0.67＊＊ to 0.96＊＊ for the linear region), indicating that a segmented model using PROC NLIN of SAS could be used effectively to estimate the leaf water characteristics. The regression analysis for the pressure-volume (PV) curve revealed genotypic variation in the solute potential at saturation (Ψ$_{s,sat}$ :-10.7 to -14.8 bar), solute potential at incipient plasmolysis (Ψ$_{s,ip}$ : -14.3 to -18.3 bar), RWC at incipient plasmolysis (RW $C_{ip}$ : 83.3 to 91.7%), high integrated turgor pressure from saturation to plasmolysis ( $_1$$^{b}$ : 0.39 to 0.81), and maximum volumetric modulus of elasticity ($\varepsilon$$_{max}$ : 150 to 445 bar).).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.236-240
• /
• 2007

In order to control the microstructure of amorphous/crystalline composites, gas atomized $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ metallic glass powders wrapped in a crystalline brass were extruded repeatedly. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.386-390
• /
• 2007

In order to, simultaneously, synthesize and control the size of microstructure of amorphous/crystalline composites, a repeated extrusion process was performed using the gas atomized $Cu_{54}Ni_6Zr_{22}Ti_{18}$ metallic glass powders and the crystalline brasses. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.24-26
• /
• 1995

The Development of A.C. Induction Motor for Railway Rolling Stock. The traction motor is designed as 4-pole induction motor with self ventilation. The winding insulation is throughout of materials of class C. The rotor is designed as a squrrel rotor with copper bar and casting. The rotor speed is detected by means of a pulse generator. The newer tection motor have no casting(frame). Punched-in holes make up the air duct and transfer the heat losses in complete. Maximim motor rpm is higher due to rotor construction. New is the entry of water-cooled traction motors in urban, However the water cooling design in - unfortunately - not applicable in traction motor.

• Journal of the Chungcheong Mathematical Society
• /
• v.27 no.4
• /
• pp.697-705
• /
• 2014

For a complex measure ${\mu}$ on B and $f{\in}L^2_a(B)$, the Toeplitz operator $T_{\mu}$ on $L^2_a(B,dv)$ with symbol ${\mu}$ is formally defined by $T_{\mu}(f)(w)=\int_{B}f(w)\bar{K(z,w)}d{\mu}(w)$. We will investigate properties of the Toeplitz operator $T_{\mu}$ with symbol ${\mu}$. We define the Toeplitz type operator $T^r_{\psi}$ with symbol ${\psi}$, $$T^r_{\psi}f(z)=c_r\int_{B}\frac{(1-{\parallel}w{\parallel}^2)^r}{(1-{\langle}z,w{\rangle})^{n+r+1}}{\psi}(w)f(w)d{\nu}(w)$$. We will also investigate properties of the Toeplitz type operator with symbol ${\psi}$.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.889-891
• /
• 1993

In order to perform the group control of motor drive systems in such as steel process line, high performance communication system is indispensible. In this paper, we introduce newly developed communication system which is suitable for these group control application. Using HDLC protocol, this system can transfer data to a long distance(up to 1km) at high speed(1Mbps) with reliability and efficiency. The performance of this communication system was proven through the application to the group control of DAEKYOUNG Bar Mill Line.

• Korean Journal of Microbiology
• /
• v.27 no.3
• /
• pp.194-200
• /
• 1989

The nucleotide sequence of inducible chloramphenicol acetyl-transferase(CAT) gene isolated from a small plasmid pSBK203 of Staphylococcus aureus was determined. The base sequence shows that structural gene of pSBK203-CAT encodes a protein of 213 amino acids and has a leader region which encodes a short polypeptide of 9 amino-acids in its upstream. vertical bar /sup 35/S vertical bar-Methionine labelled CAT gene product in minicell showed almost same mobility with pC194-CAT of which molecular weight is 24Kdal on polyacrylamide gel electrophoresis. Predicted amino acid sequence of pSBK203-CAT has revealed a high degree of homology with the CATs of pC194 and pC221 than those of cat-86, Tn9 and proteus mirabilis PM13.