• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.100-105
• /
• 2003

With the recent development of machining technology, high speed machining process is widely used for-the mold and difficult-to -cut-materials machining since it allows achieving high productivity and surface quality. However, during the high speed machining process, high cutting speed and feed rate can cause abrupt tool life decrease due to rapid rising of the cutting tool temperature. Such situation may cause increase of machining cost. Thus, in this study, developed optimization algorithm is applied to determine optimal machining variables for multiple high speed machining. The R-T characteristic curve for machining economics problems with a linear-lorarithmic tool life model is determined by applying sensitivity analysis. finally, a series of high speed machining experiments are performed to determine the desired optimal machining variables, and the results are analyzed.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.127-133
• /
• 2007

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. It is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases a phenomenon of the tunneling and shear lip by the side groove.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.435-436
• /
• 2007

In this paper, we have been developed the software in order to ostinato for spill over for TV broadcasting signals between Korea and Japan and analyzed those signals using APD curve. In Busan, we have been measured channel of Japan TV broadcasting signals during 9 months from February 2006 to October 2006. That system has been controled and translated the measured data to remote-control place. Finally it has computation and compared in the APD curve using ITU-R P.1546.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.792-798
• /
• 2014

In spatial databases, R-tree is one of the most widely used indexing structures and many variants have been proposed for its performance improvement. Among these variants, Hilbert R-tree is a representative method using Hilbert curve to process large amounts of data without high cost split techniques to construct the R-tree. This Hilbert R-tree, however, is hardly applicable to large-scale applications in practice mainly due to high pre-processing costs and slow bulk-load time. To overcome the limitations of Hilbert R-tree, we propose a novel approach for parallelizing Hilbert mapping and thus accelerating bulk-loading of Hilbert R-tree on GPU memory. Hilbert R-tree based on GPU improves bulk-loading performance by applying the inversed-cell method and exploiting parallelism for packing the R-tree structure. Our experimental results show that the proposed scheme is up to 45 times faster compared to the traditional CPU-based bulk-loading schemes.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.321-327
• /
• 2013

Purpose: To investigate a correlation between vertical fixation disparity and stereopsis by analyzing distribution of types of vertical fixation disparity. Methods: In this study, RANDOT(R) stereotest partly using random dot was used in stereopsis tests. The vertical fixation disparity in close proximity categorized fixation disparity slope into six types on the basis of the result of measurement in when two thin lines, one for one eye looks, become overlapped as a line by adding into prism with Wesson fixation disparity card while maintaining a distance of 25 cm from patients. Results: In the types of near vertical fixation disparity curve, targeting 43 people, the first type 55.82% was the most distributed, the second type is the least 23.25%, the third type of 4.65%, the fourth type of 4.65%, the fifth type of 6.98%, the sixths types of 4.65% were distributed. The result of a correlation analysis, which shows the degree of linear correlation between two variables, represented that stereopsis is not correlated with Y-intercept (r = -0.07) which show vertical fixation disparity, associated phoria (r = -0.03) and dissociated phoria (r = -0.00), but it was not statistically significant (p>0.05). Fixation disparity slope of vertical fixation disparity (r = 0.36) was shown to have a positive correlation with stereopsis. It has a low positive correlation and a meaningful statistics (p<0.05). The Y-intercept which indicates vertical fixation disparity was also not associated with stereopsis (r = -0.07) and dissociated phoria (r = -0.03), and this was not statistically significant (p>0.05), while it had a high correlation as well as a statistically significant with associated phoria (r = 0.89). There was a negative correlation between Y-intercept and fixation disparity slope of vertical fixation disparity (r = -0.33). It showed a low relationship but statistically valuable (p>0.05). As a result of regression analysis, the stereopsis was changed as 7.631" if vertical fixation disparity changes 1' and the vertical fixation disparity changed as 0.017' if stereopsis changes 1', and the change was statistically significant (p<0.05). Conclusions: The study shows that there is a low correlation between stereopsis and vertical fixation disparity, and it is difficult to determine stereopsis only using vertical fixation disparity. Therefore, it suggests other factors above vertical fixation disparity have greater influence on stereopsis.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.597-603
• /
• 2009

In this study, Based on the optimization developed in Um et al. (2009), optimum design method of the alignment when building new lines and renewing existing ones is presented. The object function used for optimization is passenger comfort ($P_{CT}$) which was proposed in BSI (2006). Other aspects of track/vehicle interaction will be treated in boundary conditions. And track/vehicle interaction analysis is peformed using KTX-II model. From the analysis results, it was found that the optimum alignments are affected by the angle (I) between adjacent straight lines and $R-L_t$ combinations. Also the dynamic analysis confirms well the results from the simplified analysis. However, In the most cases, the $P_{CT}$ values in the dynamic analysis are higher than the simplified $P_{CT}$ values. If both methods are used when optimizing the alignment, it will be possible to design the alignments more rapidly and reliably.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.43-51
• /
• 2017

In this study, new design fire curves were suggested for the utilization in fire simulations. Numerical simulations with the Fire Dynamics Simulator (FDS) were performed for the n-octane and n-heptane pool fires in the ISO 9705 compartment to evaluate the prediction performance of the previous quadratic, exponential design fire curves and newly suggested ones. The numerical results were compared with the experimental temperature and concentrations of $O_2$ and $CO_2$. The numerical results with the previous quadratic and exponential curves showed slow increase and decrease trend than experiments. However, the numerical results with the newly suggested 2 design fire curves showed more similar variation trend in temperature, $O_2$ and $CO_2$ concentrations than the quadratic and exponential curves. It was found that the newly suggested design fire curves can be possibly used in the numerical simulation of fires in a practical respect.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.115-118
• /
• 1995

We predict the magnetization curves with strains in thin films. It is possible to predict the magretoelastic ani¬sotropy erergy which generates the changes of the M-H curves in thin films. We show the prediction of M-H curves in case of isotropic films such as polycrystalline am amorphous thin films as well as single crystal cubic films.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.55.1-55.1
• /
• 2010

대마젤란 은하에 속한 식쌍성의 시선속도 곡선을 완성하기 위하여 2009년 11월 칠레에 위치한 Cerro Tololo Inter-American Observatory (CTIO)의 1.5m 망원경과 R-C Spectrograph를 사용하여 중 분산 분광관측을 수행하였다. 분광관측은 380nm - 540nm 영역에서 $H_8,\;H_{\varepsilon},\;H_{\delta},\;H_{\Gamma},\;H_{\beta}$ 등의 흡수선을 관측하였다. 중분산으로 관측된 식쌍성의 각 구성원별에서 나오는 흡수선들은 구별되지 않으므로 이를 구별하기 위하여 구성원들의 Flux 비와 함께 gauss curves fitting 방법으로 각 흡수선들을 2개의 성분으로 분해하여 시선속도를 측정하고, 시선속도곡선을 완성하였다. 완성된 이중 시선속도 곡선은 Wilson & Devinney 차등 보정법으로 분석하여, 궤도 장반경, 질량비, 계의 시선속도 등을 구하였다. 또한 각 식쌍성들의 광도곡선을 분석하여 측광학적인 해를 구하고, 최종적으로 분광 및 측광관측의 해를 혼합하여 대마젤란은하 식쌍성들의 절대량을 구하였다. 이후 이를 바탕으로 거리를 구하여 기존에 발표된 마젤란은하의 거리와 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1251-1256
• /
• 2004

본 연구는 토양도 및 Landsat 위성영상을 GIS 및 R/S기법으로 토지이용의 공간적 분포를 분석하여 토지피복의 경년적 변화에 따른 유출곡선지수를 산정하고 유출곡선지수의 변화에 따른 유출상태의 변화를 분석하는데 그 목적이 있다. 이른 위하여 개략토양도의 토양분류에 대한 기존분류방법과 토지이용에 따른 CN분류법을 조사 검토한 후 CN을 산정하였으며, 향후 보다 정확한 산정기법이 제시될 수 있을 것으로 판단된다. 본 연구를 위하여 활용한 기초자료는 건설교통부와 한국수자원공사에서 시행하고 있는 전국유역조사의 자료로서 연구 분석에 이용하였다.