• 대한토목학회논문집
• /
• 제3권3호
• /
• pp.71-86
• /
• 1983

현재(現在) WSD로 설계(設計)되고 있는 우리 나라 철근(鐵筋)콘크리트 옹벽구조물(擁壁構造物)에 있어서 가장 보편적으로 사용되고 있는 캔틸레버 옹벽(擁壁)의 안정해석(安定解析) 및 각부설계(各部設計)를 보다 합리적(合理的)이며 확률적(確率的)인 신뢰성(信賴性) 이론(理論)을 도입하여 신뢰성(信賴性) 모델에 따른 안정해석(安定解析) 및 각부설계(各部設計)에 대한 신뢰성(信賴性) 설계규준(設計規準)을 LRFD에 의거하여 제안(提案)하고, 또 안정해석(安定解析)의 공칭안전율(公稱安全率)에 대한 이론적(理論的)인 근거를 제시(提示)하는 것이 본(本) 연구(硏究)의 주요내용(主要內容)이다. 신뢰성(信賴性) 이론(理論)에 의해 안정해석(安定解析) 및 각부설계(各部設計)에 대한 한계상태방정식(限界狀態方程式)을 유도하고, Coulomb의 주동토압계수(主動土壓係數), Hansen의 지지력공식(支持力公式)을 사용하여 Cornell의 MFOSM에 의해 불확실량(不確實量) 산정(算定)의 알고리즘을 유도하였으며 그에 따른 불확실량수준(不確實量水準)은 우리 나라의 현실(現實)을 고려한 적절한 값으로 제안(提案)하였다. 현행(現行) R.C. 옹벽설계규준(擁壁設計規準)에 따라 Calibration 하므로서 목표신뢰성지수(目標信賴性指數)${\beta}_0$를 다음과 같이 선택하고(전도(轉倒): ${\beta}_0$=4.0, 골동(滑動): ${\beta}_0$=3.5, 지지력(支持力): ${\beta}_0$=3.0, 휨: ${\beta}_0$=3.0, 전단(剪斷): ${\beta}_0$=3.2), 이 ${\beta}_0$에 대응하는 하중(荷重) 및 저항계수(抵抗係數)를 산정(算定)하였으며, 안정해석(安定解析)에 대한 현행(現行) 철근(鐵筋)콘크리트 표준시방서(標準示方書)의 안전율(安全率)을 검토한 결과 다음과 같은 값이 적절하다는 것을 알았다(전도(轉倒): 1.8, 골동(滑動): 1.9, 지지력(支持力): 3.6). 또한 현행(現行) WSD R.C. 옹벽(擁壁)의 설계규준(設計規準)을 위해 신뢰성(信賴性)에 의한 공칭안전율(公稱安全率)과 허용응력(許容應力)을 제안(提案)하였다. 그리고 본(本) 연구(硏究)에서 제안(提案)하는 R.C. 옹벽(擁壁)의 LRFD 신뢰성(信賴性) 설계규준(設計規準)을 현행(現行) R.C. 표준시방서(標準示方書)의 설계규준(設計規準)에 대응(對應)하는 설계규준(設計規準)으로 도입함이 바람직하다는 사실을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제29권2호
• /
• pp.170-176
• /
• 2004

목적 : 본 연구에서는 '전단접착강도 시험법에서 cohesive failure를 줄일 수 있는 것으로 소개된 metal iris를 사용하면, 실제의 1급 와동에서보다 복합 레진과 와동벽의 결합이 없어서 C-factol 적게 작용하고 계면에 발생하는 수축 응력이 감소됨으로써, 임상에서보다 높은 결합력 값이 보고될 것이다.'라는 가설을 검증하기 위하여 dentin ilia를 사용하여 전단접착강도를 측정하였다. 방법 : 64개의 대구치를 4군으로 구분하여 metal iris와 dentin iris군으로 구분하고, 그 각각을 ONE-STEP과 ALL-BOND 2의 두 군으로 나누었다. bonding agent를 적용하고. iris를 고정한 후, 복합 레진을 충전하여 시편을 완성하였다. 이 때 dentin iris의 경우 내면에도 bonding agent를 적용하여 와동벽과의 결합이 발생하게 하였다. 전단접착강도는 24시간 후 측정하였고, 파절의 양상은 주사전자현미경과 입체광학현미경을 이용하여 결정하였다. 결과 : 전단접착강도 측정법에서 iris 법을 이용함으로써 cohesive failure를 줄일 수 있다. 전단접착강도 측정법은 adhesive 두께가 얇은 경우에 와동벽의 영향을 받는다.

• 한국지진공학회논문집
• /
• 제14권6호
• /
• pp.23-31
• /
• 2010

우리나라 공동주택의 대부분을 이루는 철근콘크리트(RC) 벽식 구조의 지진에 대한 거동을 예측하기 위해 신뢰성이 있으며 사용하기 간편한 해석모델의 수립이 필요하다. 본 논문은 기 수행된 RC 전단벽 부분구조의 횡 하중 반전주기 실험결과를 기준으로 하여 PERFORM 3D에서 가용한 RC벽 요소 및 보 기둥 요소 해석모델을 응용하여 최대한 실험결과와 근접한 결과를 주는 모델을 수립하였다. 전체 및 국부거동에 있어서 이 해석결과를 실험결과와 비교함으로써 해석의 신뢰성과 한계성을 확인함과 동시에, 실험에서 파악하기 어려운 내부 저항력의 구성, 전체 구조물의 저항 메카니즘에 대한 정량적인 분석을 제시한다.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.223-238
• /
• 2019

This study investigated the ultimate lateral load capacity of shear walls constructed with several types of structural foam sheathing. Sixteen tests were conducted and the results were compared to the published design values commutated by the manufactures for each test series. The sheathing products included 12.7 mm (1/2 in) SI-Strong, 25.4 mm (1 in) SI-Strong, 12.7 mm (1/2 in) R-Max Thermasheath, and 2 mm (0.078 in) ThermoPly Green. The structural foam sheathing was attached per the manufacturers' specification to one side of the wood frame for each wall tested. Standard 12.7 mm (1/2 in) gypsum wallboard was screwed to the opposite side of the frame. Simpson HDQ8 tie-down anchors were screwed to the terminal studs at each end of the wall and anchored to the base of the testing apparatus. Both monotonic and cyclic testing following ASTM E564 and ASTM E2126, respectively, were considered. Results from the monotonic tests showed an 11 to 27 percent smaller capacity when compared to the published design values. Likewise, the test results from the cyclic tests showed a 24 to 45 percent smaller capacity than the published design values and did not meet the seismic performance design criteria computation.

• 한국공간구조학회논문집
• /
• 제24권2호
• /
• pp.83-90
• /
• 2024

Machine learning is widely applied to various engineering fields. In structural engineering area, machine learning is generally used to predict structural responses of building structures. The aging deterioration of reinforced concrete structure affects its structural behavior. Therefore, the aging deterioration of R.C. structure should be consider to exactly predict seismic responses of the structure. In this study, the machine learning based seismic response prediction model was developed. To this end, four machine learning algorithms were employed and prediction performance of each algorithm was compared. A 3-story coupled shear wall structure was selected as an example structure for numerical simulation. Artificial ground motions were generated based on domestic site characteristics. Elastic modulus, damping ratio and density were changed to considering concrete degradation due to chloride penetration and carbonation, etc. Various intensity measures were used input parameters of the training database. Performance evaluation was performed using metrics like root mean square error, mean square error, mean absolute error, and coefficient of determination. The optimization of hyperparameters was achieved through k-fold cross-validation and grid search techniques. The analysis results show that neural networks and extreme gradient boosting algorithms present good prediction performance.

• 한국지진공학회논문집
• /
• 제14권6호
• /
• pp.55-65
• /
• 2010

본 실험 연구의 목적은 횡방향 정적가력을 통하여 2층 R.C 전단벽식 구조의 내진성능을 평가하는 것이다. 본 연구의 실험체는 대상 건물의 개구부를 가지는 T자형 벽체 1층과 2층의 일부분을 대상으로 실물크기의 3/5 크기정도로 축소하였고, 인방보의 유 무를 실험변수로한 2개의 실험체를 제작하여 횡방향의 정적가력 실험을 수행하였다. 인방보 유무에 따른 벽체의 구조적 성능 및 거동의 차이를 비교한 결과, 인방보가 있는 실험체가 인방보가 없는 실험체보다 최대내력과 연성능력 등의 내진성능이 우수한 것으로 판단되었다.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.227-240
• /
• 2016

An analytical study was conducted to investigate the effect of the shape and spacing of modified inclined studs used as shear connector between concrete and steel plate on the cyclic behavior of steel plate concrete (SC) shear wall. 9 different analysis cases were adopted to determine the optimized shape and spacing of stud. As the results, the skeleton curves were obtained from the load-displacement hysteresis curves, and the ultimate and yielding strengths were increased as the spacing of studs decrease. In addition, the strength of inclined studs is shown to be bigger compared to that of conventional studs. The damping ratios increased as the decrease of stiffness ratio. Finally, with decreasing the spacing distance of studs, the cumulative dissipated energy was increased and the seismic performance was improved.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.55-60
• /
• 1990

The objective of this study is to predict the nonlinear behavior of reinforced concrete shear walls, with the reinforcement uniformly distributed, under reversed cyclic loads. This study introduces joint Element Model which formulates the pulling out of rebars, slipping and intrusion of junction planes. The applicability of this study was experimental verfied by specimens SW1, SW2 and SW3 tested by authors, Wall1 by Paulay, SW16 and SW19 by Sheu. In almost specimen, the ratio of analytical to experimental maximum shear stress is within approximately 5%. In case of energy dissipation and maximum drift, the analytical results fully coincide with those of experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.429-432
• /
• 2004

This paper discussed finite element method(FEM) models of the reinforced concrete rectangular shear walls with opening configuration and analysed under constant axial and monotonic lateral load using ABAQUS. The research comprises constitutive models to represent behavior of the materials that compose a wall on the basis of experimental data, development of techniques that are appropriate for analysis of reinforced concrete structures, verification, and calibration of the global model for reinforced concrete shear walls of increasing complexity. Results from the analyses of these FEM models offers significant insight into the flexural behavior of benchmark data.

• Wind and Structures
• /
• 제38권1호
• /
• pp.15-42
• /
• 2024

A flexible-base coupled-two-beam (CTB) discrete model with equivalent tuned mass dampers is used to assess the effect of soil-structure interaction (SSI) and different types of lateral resisting systems on the design of passive dynamic absorbers (PDAs) under the action of along-wind and across-wind loads due to vortex shedding. A total of five different PDAs are considered in this study: (1) tuned mass damper (TMD), (2) circular tuned sloshing damper (C-TSD), (3) rectangular tuned sloshing damper (R-TSD), (4) two-way liquid damper (TWLD) and (5) pendulum tuned mass damper (PTMD). By modifying the non-dimensional lateral stiffness ratio, the CTB model can consider lateral deformations varying from those of a flexural cantilever beam to those of a shear cantilever beam. The Monte Carlo simulation method was used to generate along-wind and across-wind loads correlated along the height of a real shear wall-frame building, which has similar fundamental periods of vibration and different modes of lateral deformation in the xz and yz planes, respectively. Ambient vibration tests were conducted on the building to identify its real lateral behavior and thus choose the most suitable parameters for the CTB model. Both alongwind and across-wind responses of the 144-meter-tall building were computed considering four soil types (hard rock, dense soil, stiff soil and soft soil) and a single PDA on its top, that is, 96 time-history analyses were carried out to assess the effect of SSI and lateral resisting system on the PDAs design. Based on the parametric analyses, the response significantly increases as the soil flexibility increases for both type of lateral wind loads, particularly for flexural-type deformations. The results show a great effectiveness of PDAs in controlling across-wind peak displacements and both along-wind and across-wind RMS accelerations, on the contrary, PDAs were ineffective in controlling along-wind peak displacements on all soil types and different kind of lateral deformation. Generally speaking, the maximum possible value of the PDA mass efficiency index increases as the soil flexibility increases, on the contrary, it decreases as the non-dimensional lateral stiffness ratio of the building increases; therefore, there is a significant increase of the vibration control effectiveness of PDAs for lateral flexural-type deformations on soft soils.