• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.366-369
• /
• 2001

In this study, the matrix Organic Electroluminescence (OEL) device, that was consisted of R,G,B pixels. We fabricated OEL devices by side by side methode and, used organic material Alq3 as green, DCM as red and Butyl PBD as blue ETL. We investigated the characteristic of brightness and current density for matrix OEL device. As the results, each color devices has minimum about 100 cd/㎡ brightness and maximum luminescence was 2500cd/㎡ in green OEL device

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.176-179
• /
• 2002

Angiogenesis는 존재하는 혈관으로부터 새로운 혈관이 생성되는 과정으로, 암의 성장과 전이에 있어서 필수적 요소이다. 특히, 신생혈관의 밀도는 암의 성장과 밀접한 상관관계를 가지고 있으므로 암의 진단과 예후 추정을 위한 판단근거로 사용되고 있다. 본 연구는 신생혈관의 밀도를 정확한 수치로 정량화 하기 위하여, 칼라 특성값을 이용하여 신생혈관을 분할하였다. 분류기 생성을 위한 학습집단은 신생혈관영역, 배경영역에서 각각 100개씩 픽셀을 추출하였다. 추출된 픽셀에서 9개의 칼라 특성값(R,G,B,H,S,I,I₁,I₂,I₃)을 계산하고, 다변량 판별분석을 이용하여 3개의 분류기를 생성하고 분할된 결과를 비교분석하였다. 분할된 결과를 비교하면 RGB와 I₁ I₂ I₃ 칼라 특성값을 이용하여 생성된 분류기에 의해 분할된 결과가 전문가 의견과 높은 상관관계를 나타내었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.305-307
• /
• 2009

본 논문에서는 기존의 퍼지 논리를 이용한 필터링 알고리즘의 문제점을 개선하는 동시에 컬러 영상에 적용할 수 있는 퍼지 필터 알고리즘을 제안한다. 제시된 퍼지 필터 알고리즘은 영상의 RGB 컬러 정보를 각각의 R, G, B 채널 영상으로 분리하고, 각 채널 영상에서 마스크가 위치한 기준 픽셀의 잡음 가능성 정도를 퍼지 논리에 적용하여 판단한다. 잡음 정도에 따라서 출력 영상의 화소값을 평균값 또는 중간값으로 결정한다. 제안된 방법을 잡음이 존재하는 칼라 영상에 적용한 결과, 단색 정보를 기준으로 처리하는 기존의 퍼지 필터 방법에 비해서 효과적인 것을 확인하였다.

• Food Science and Preservation
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2002

The effect of gamma irradiation was investigated on the microbiological and physicochemical qualities of boiled-dried anchovies (large- and smallsized) packed in PVC film (0.06 ㎜) during storage at 15$\pm$1$\^{C}$ for 6 months. On the other hand, thermoluminescence characteristics of minerals extracted from the sample were analyzed to evaluate its possibility in detecting the irradiated anchovies. The samples were contaminated by microbial levels of 104∼106 CFU/g in total aerobic bacterial counts and negative in coliforms, which were different depending on the sample sizes. Gamma irradiation at 3 kGy was effective for improving the hygienic quality of both samples for 6 months, keeping the microbial population less than 20 CFU/g. Besides it was not detrimental to the quality attributes, such as instrumental color parameters L, a, b, ΔE), browning, TBA value, volatile basic nitrogen, trimethylamine-N and sensory properties(appearance, color, odor, tape, overall acceptability). However, storage conditions (time, temperature, packing) showed a critical factor nfluencing the quality changes of dried anchovies. Thermoluminscence analysis was prove to distinguish irradiated from non-irradiated anchovies by comparing both temperature at which glow curves appear and the curve intensity, that was possible even after 6 months at - 20$\^{C}$.

• Journal of Environmental Science International
• /
• v.10 no.6
• /
• pp.431-436
• /
• 2001

Variations in phytoplankton concentrations result from changes of the ocean color caused by phytoplankton pigments. Thus, ocean spectral reflectance for low chlorophyll waters are blue and high chlorophyll waters tend to have green reflectance. In the Korea region, clear waters and the open sea in the Kuroshio regions of the East China Sea have low chlorophyll. As one moves even closer In the northwestern part of the East China Sea, the situation becomes much more optically complicated, with contributions not only from higher concentration of phytoplankton, but also from sediments and dissolved materials from terrestrial and sea bottom sources. The color often approaches yellow-brown in the turbidity waters (Case Ⅱ waters). To verify satellite ocean color retrievals, or to develop new algorithms for complex case Ⅱ regions requires ship-based studies. In this study, we compared the chlorophyll retrievals from NASA's SeaWiFS sensor with chlorophyll values determined with standard fluorometric methods during two cruises on Korean NFRDI ships. For the SeaWiFS data, we used the standard NASA SeaWiFS algorithm to estimate the chlorophyll_a distribution around the Korean waters using Orbview/ SeaWiFS satellite data acquired by our HPRT station at NFRDl. We studied In find out the relationship between the measured chlorophyll_a from the ship and the estimated chlorophyll_a from the SeaWiFs satellite data around the northern part of the East China Sea, in February, and May, 2000. The relationship between the measured chlorophyll_a and the SeaWiFS chlorophyll_a shows following the equations (1) In the northern part of the East China Sea. Chlorophyll_a =0.121Ln(X) + 0.504, R²= 0.73 (1) We also determined total suspended sediment mass (55) and compared it with SeaWiFS spectral band ratio. A suspended solid algorithm was composed of in-.situ data and the ratio (L/sub WN/(490 ㎚)L/sub WN/(555 ㎚) of the SeaWiFS wavelength bands. The relationship between the measured suspended solid and the SeaWiFS band ratio shows following the equation (2) in the northern part of the East China Sea. SS = -0.703 Ln(X) + 2.237, R²= 0.62 (2) In the near future, NFRDI will develop algorithms for quantifying the ocean color properties around the Korean waters, with the data from regular ocean observations using its own research vessels and from three satellites, KOMPSAT/OSMl, Terra/MODIS and Orbview/SeaWiFS.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.123-144
• /
• 2017

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.47.1-47.1
• /
• 2020

Multi-band photometry provides an advantage in being able to perform taxonomic classification analysis on a large number of asteroids in a much shorter period of time than spectroscopy. We observed main-belt asteroids using Korea Microlensing Telescope Network (KMTNet) in CTIO during the summer seasons in the southern hemisphere, mostly in December 2015, 2016 and 2017 with two visible photometric systems, SDSS (g, r, i, and z), and Johnson-Cousins (B, V, R, and I). Targets were selected for the asteroids which had already been classified based on Bus-Binzel taxonomy (Bus & Binzel, 2002) and DeMeo taxonomy (DeMeo et al. 2009). Not only the targets but also numerous serendipitously observed asteroids were identified. In summary, 6817 and 5456 known objects, including 307 and 233 already classified asteroids were observed with SDSS and Johnson-Cousins systems, respectively. Using principal component analysis, the three major asteroid complexes and a class, S-, C-, and X-complexes and V class are found to be well separated in the principal component plane (spectral slope and 1 micron absorption depth) with both filter systems. We will present and discuss the results of our newly proposed three-dimensional color taxonomy for asteroids using the whole dataset (Roh et al., to be submitted).

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.375-380
• /
• 2000

The preliminary screening of several cyanobacteria, using mice bioassay, reveale the production of a hepatotoxin by the cyanobacterium Scytonema sp. strain BT 23 isolated from soil. An intraperitoneal injection of the crude toxin (LD50 56 mg/kg body wt) from this strain caused the death of the mice within 40 min, and the anmals showed slinical signs of mice within 40 min, and the animals showed clinical signs of hepatotoxicity. The toxin was purified and partially characterized. The active fraction appears to be nonpolar in nature and shows absorption peaks at 240 and 285 nm. The purified toxin had an LD50 of TEX>$100<\mu\textrm{g}/kg$ body wt and the test mice died within 40 min of toxin administration. The toxin-treated mice showed a 1.65-fold increase in liver weight at 40 min and the liver color chnged to dark red due to intrahepatic hemorrhage and pooling of blood. Furthermore, the administration of the toxin to test mice induced a 2.58, 2.63, and 2.30-fold increse in the activity of the serum enzymes alanine aminotransferase, lactate dehydrogenase, and alkaline phosphatase, respectively. Further experiments with the 14C-labeled toxin revealed a maximum accumulation of the toxin in the liver. The clinical symptoms in the mice were similar to those produced by microcystin-L.R. These results suggest that hepatotoxins may also be produced in non bloom-forming planktonic cyanobacteria.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.154-165
• /
• 2020

To assign the functionality of the regenerated fiber from waste MDF(wMDF) made of pitch pine, we examined the dyeing characteristics of natural dyes, sappan wood as a polychromatic natural red series, monochromatic gardenia as a yellow series, and indigo blue series. For nonemordanting dye, the colors of regenerated fiber dyed by sappan wood and gardenia were reddish yellow (YR) and yellow (Y) series, respectively, and dyeing conditions were appropriate a 30 ~ 50 g/L of dyeing materials at 60 ℃ for 60minutes of dyeing time. We obtained regenerated woody dyed fibers (Re-WDF), YR to the red (R) series by premordanting with Al and Cu mordant for sappan wood and the purplish red (RP) series by Fe premordanting. In the case of gardenia, only Y series colors were developed in nonemordanting dye or all three mordants. Indigo dye produced Re-WDF with greenish yellow (GY) tone at 1%, green (G) tone at 3%, and blue (B) tone at 5% concentration or more. Re-WDF with indigo showed the best light fastness followed by sappan wood and gardenia. In particular, the light fastness of Re-WDF with gardenia was very poor. The light fastness was somewhat improved by premordanting(Fe>Cu>Al) both sappan wood and gardenia dyes.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.841-848
• /
• 2012

Response surface methodology was applied to the processing conditions to investigate the physicochemical properties of ramie porridge. In the processing conditions based on the central composite design with the addition of ramie leaf powder (0-4 g) and water (700-1100 g), the coefficients of determination (R2) of the models were above 0.9141 for the physicochemical properties, above 0.7627 for the Hunter color parameters, and above 0.8975 for the rheological properties. The soluble solid content, viscosity, and gumminess of the sample decreased significantly with an increase in the water added, whereas the spreadability and adhesiveness increased significantly. The Hunter color L value of the sample decreased significantly with an increase in the amount of ramie leaf powder added, whereas the Hunter b value increased significantly. The estimated maximum viscosity of the ramie porridge was shown to be 24,643 cp when 1.90 g ramie leaf powder and 700.24 g water were added; the estimated maximum lightness of the ramie porridge was shown to be 59.11 when 0.02 g ramie leaf powder and 869.30 g water were added; and the estimated maximum gumminess of the ramie porridge was shown to be 21.46 g when 2.12 g ramie leaf powder and 700.35 g water were added.