• Wind and Structures
• /
• v.1 no.4
• /
• pp.303-315
• /
• 1998

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1026-1037
• /
• 2016

3rd Generation Partnership Project (3GPP) is the progressing standardization of the narrowband IoT (NB-IoT) system to support massive devices for the Internet of Things (IoT) services. The NB-IoT system uses a coverage class technique to increase the performance of the NB-IoT system while serving massive devices in very wide coverage area. A moving device can change the coverage class according to the distance or the channel state between the base station and the moving device. However, in the conventional NB-IoT standard, the performance of the NB-IoT system degrades because the coverage class is changed based on the fixed criterion. This paper proposes the coverage class adaptation schemes to increase the performance of the NB-IoT system by dynamically change the coverage class according to the location or the channel state of the device. Simulation results show that the proposed coverage class adaptation scheme decreases both the signaling overhead and the PDCCH decoding error rate in comparison with the conventional coverage class adaptation scheme in the 3GPP standard.

• Cartoon and Animation Studies
• /
• s.9
• /
• pp.59-79
• /
• 2005

The paper concerns the role model of the local cultural industry agencies, which were established by the local government for the purpose of fostering the regional cultural industries. In this article, the term of the innovative milieu refers to the interaction and network system for the creation, diffusion and application of knowledge. In doing so, the case on the Gyeonggi Digital Content Agency(GDCA), which has managed the Digital Animation Academy and the cultural heritage based digital content development project will be examined in terms of the network between academic and industry. As a result of the case study, it is not certain that the activities and policy programs of the GDCA has affected the improvement of the knowledge and network environment in the field of cultural content industries. This demonstrates industries rather than the innovation system as a whole. In this respect, the paper develops the Cultural Content R & D Network Model for the improvement of the creative partnership among universities, companies and public sector organizations. In addition, the paper suggests that the Digital Animation Academy should be managed in terms of the improvement of the innovative environment of the regional cultural content cluster.

• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2019

Materials and Parts acts as the bridge in the manufacturing industry. In 2018, the materials and parts industry became the leading industry in Korea as its export reached $316.2 billion, accounting for 52.3 percent of the country's total exports. As such, it is the main industry of Korea leading the trade surplus, but when it comes to Japan, it is not. The trade deficit with Japan shrinks to $24 billion last year but the materials and parts industry still accounts for 60 percent of total deficit, which is about $15.1 billion. Today Japan has the top competitiveness in the high-tech materials and parts industry and the factors can be found in cooperation and symbiosis among companies, monotsukuri spirit, and long-term government policy. In order for Korean economy to pursue the Japan's high-tech materials and parts industry, the following change of perception is necessary. First, the material and parts industry requires win-win cooperation. In general, materials and parts are intermediate products. Therefore, it is important to understand the characterist that the transactions are all made up between companies not the with consumers. Second, expansion of joint technology development is absolutely necessary. South Korea is a leading country in the field of general-purpose materials and parts. However, the research shows that South Korea has structure which small and medium-sized companies could have difficulties in developing high-tech products as finding demand and developing market are hard due to low participation of large corporations at R&D stage. It is necessary for large corporations to participate in joint R&D and share opinions of customers from the beginning stage of R&D. Third, a long-term approach is needed. Structural vulnerabilities in the Korea's materials and parts industry, including the lack of advanced technologies is the main reason of solidification of Korea's trade deficit with Japan but there are also cultural differences about technology in the background. Even if it takes time, a long-term approach is absolutely necessary to build up technology and know-how in order to secure competitiveness in the high-tech materials and parts industry. This approach applies to act of corporation and government policy.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.60
• /
• pp.257-279
• /
• 2013

Nine FTA like Korea-Chile FTA, Korea-Singapore FTA, Korea-EFTA FTA, Korea-ASEAN FTA, Korea-India CEPA, Korea-EU FTA, Korea-U.S.A. FTA, Korea-Peru FTA and Korea-Turkey have been concluded and implemented in 46 countries as of May, 2013. In addition to these nine FTA, Korea has been negotiating FTA or CEPA(Comprehensive Economic Partnership Agreement) with China and Vietnam and Indonesia. Now Korean government is about to conclude FTA agreement with Indonesia which is one of crucial trading partners in Asian countries so the objective of this paper is to suggest how to design ROO schemes properly in such upcoming FTA agreement since more activation of trade and more utilization of FTA can be depend on the details of ROO schemes. As a result, this paper suggests well-design of ROO schemes as follows ; First, self-issuance origin proof system can be considered because authority-issuance origin proof system may reduce the utilization ratio of FTA. Second, combination of indirect and direct verification system in terms of origin verification system will be more preferable because this will be more fitting to Asian countries as considering trading environments and characteristics of Asian market. Third, criteria to determine origin can be based on wholly obtained plus substantial transformation system which contains CTC plus VC along with some percentage of de minimis. In addition to this, the number of products stipulated in PSR should be minimized and applied similar manner to avoid complexity of deciding origin.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.70-76
• /
• 2011

This paper presents the unified user equipment (UE) baseband modulation and demodulation (modem) hardware platform architecture to support multiple radio access technologies. In particular, this platform selectively supports two systems; one is HEDGE system, which is the combination of third generation partnership project (3GPP) Release 7 high speed packet access evolution (HSPA+) and global system for mobile communication (GSM)/general packet radio service (GPRS)/enhanced data rates for GSM evolution (EDGE), while the other is LEDGE system, which is the combination of 3GPP Release 8 long term evolution (LTE) and GSM/GPRS/EDGE. This is done by applying the flexible pin multiplexing scheme to a hardwired pin mapping process. On the other hand, to provide stable connection, high portability, and high debugging ability, the stacking structure is employed. Here, a layered board architecture grouped by functional classifications is applied instead of the conventional one flatten board. Based on this proposed configuration, we provide a framework for the verification step in wireless cellular communications. Also, modem function/scenario test and inter-operability test with various base station equipments are verified by system requirements and scenarios.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.192-206
• /
• 2021

The pharmaceutical industry is an industry that provides medicines related to the health and life of the people. The pharmaceutical industry is a traditional regulation industry with the characteristics of R&D(Research and Development), purchasing, manufacturing, distribution and consumption under strict government management. Until now, pharmaceutical companies have continued to make efforts to maintain competitiveness through patent management, new product development, and marketing. However, industries are rapidly changing, including rising costs for developing new products and expanding generic markets. As these changes and uncertainties in the management environment increase, efforts are required to improve the competitiveness of the pharmaceutical industry from a new perspective. In this study, we intend to examine the impact of SCM(Supply Chain Management) dynamic capability of pharmaceutical companies on corporate performance through partnerships to respond to market changes and uncertainties. It was determined that the agility, visibility and flexibility that constitutes the SCM dynamic capabilities would affect the performance of pharmaceutical companies. In this study, the importance of SCM dynamic capabilities and cooperative relationships was identified through surveys by SCM managers of pharmaceutical companies. Consequently, in the pharmaceutical industry, which is a regulatory industry, we have identified that SCM dynamic capabilities and cooperative relationships with partner companies have a significant impact on corporate performance.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2018

As the international Maritime Organization is tightening up the emission regulation vessel, many countries and companies are pushing ahead the LNG fuel as one of long term solution for emission problems of ship. as a study on the way to conduct business for LNG bunkering around the world, this study was analyzed in view-point of business models focused on major countries such as Japan, China, Singapore, Europe and United States. The results of this study are as follows. China first established a nation-centered LNG bunkering policy. And then, the state and the energy company have been cooperating and carrying on LNG bunkering business for LNG fueled ships. Some countries in Europe and United States are in the process of LNG bunkering business mainly with private company. To obtain cheaper LNG fuel than bunker-C, the private company has a business model of LNG bunkering on their own LNG fueled ships, while securing LNG with high price competitiveness through partnership with middle class operators such us LNG terminal and natural gas liquefaction plant. Also, the LNG bunkering business around the world is focused on private companies rather than public corporations, but it was going to be focused on large energy companies because the initial cost required to build LNG bunkering infrastructure. Three models (TOTE model, Shell model, ENGIE model) of LNG bun kering business are currently being developed. It has been found that the way in which LNG bunkering business is implemented by different countries is applied differently according to the enterprise and national policy.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.54-61
• /
• 2000

This paper presents the performance evaluation of channel estimation algorithm using RLS algorithm lot W-CDMA reverse link over Rayleigh fading channels. By obtaining BER(Bit Error Rate) performance through computer simulations, the RLS(Recursive Least Square) algorithm is compared with the existing WMSA(Weighted Averaging)(K=1,3) and constant gain algorithm. The channel structure, modulation and pilot patterns are applied to the ARIB (Association of Radio Industries and Business) and 3GPP (3rd Generation Partnership Project) ITU-R proposal for the IMT-2000. The BER performance of RLS algorithm with linear interpolation is similar to that of WMSA(K=1) and slightly superior to that of constant gain algorithm at low Doppler frequencies. Also, RLS algorithm performance is better than that of the WMSA(K=1,3) and constant gain algorithms about 4dB at BER=2.0$\times$$10^{-2}$ and Doppler frequencies $F_D$=320Hz. With increasing Doppler frequency, therefore, the BER performance of RLS algorithm with linear interpolation is superior to WMSA(K=L.3) and constant rain algorithms.

• Journal of the Economic Geographical Society of Korea
• /
• v.7 no.1
• /
• pp.45-63
• /
• 2004

The main purpose of this article is to suggest policy implications for building innovative cluster in Korea by investigating the operating system and role of the Kanagawa Science Park (KSP) located in Kanagawa prefecture, Japan as a central network agent. The KSP established mainly by private and government partnership has played a critical role for building innovative clusters as a way in which increase national competitiveness. But they also provide variety of real service from R&D to commercialization for local firms by facilitating and coordinating networks among regional economic actors such as firms, universities and public research institutes. The regional policy as a way in which increase national competitiveness in Korea is also the establishment of innovative clusters based on regional and industrial characteristics. However, the main problem with building the innovative cluster is the reduction of policy effectiveness due to duplicated supporting and coordinating institutes and institutions established by the each central administration and local governments, aimed at facilitating networks among regional economic actors. In this context, the article suggests that there is a need to build a regional central network agent by designing an organic operating system for the effective management of each network agent in accordance with the process from R&D to commercialization, i.e. an encompassed supporting system, on the basis of benchmarking the KSP operating system in Japan.