• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.123-129
• /
• 2008

The final objective of this study is to establish the research and development (R&D) encouragement strategy in construction area. For this, this study deals with the survey of current status of Korean construction industry. The result of this study is as follow; First, it is necessary for strengthen the R&D infrastructure to establish R&D cooperation system between industry, university, government and public institute. Second, private sector's should do its role as one of the four performing sectors in R&D network, not just assisting role. We will apply the result for establshing the national strategy as basic data.

• 대한예방한의학회지
• /
• 제13권1호
• /
• pp.1-11
• /
• 2009

To strengthen the R&D capability and the competitiveness of the Korean oriental medicine industry, an adequate supply of qualified R&D personnel including medical doctors of Korean oriental medicine is an important precondition. This study analyze current and future R&D manpower requirements including medical doctors in the Korean oriental medicine research area. Our analyses can be utilized for developing the government R&D manpower planning including the adequate supply of medical doctors for the Korean oriental medicine research. For the study, we conducted and analyzed a delphi survey of the experts, the principal investigators, with expertise in Korean oriental medicine research areas. The results of this study can be summarized as follows; First, in 2007 the Korean oriental medicine R&D personnel is currently under-supplied as many as 302 people including 111 medical doctors of Korean oriental medicine. The rate of under-supplied is 28.2%. Second, in 2017 the forecast shows that the R&D personnel in this area will be more severely under-supplied as many as 539 people including 185 medical doctor of Korean oriental medicine. The rate of under-supplied will be 32.6%. As a result, the confrontation of demand and supply forecasts shows that, in general, severe shortages of R&D manpower in the areas of Korean oriental medicine will result if there are not adequate manpower policy adjustment.

• 대한예방한의학회지
• /
• 제6권1호
• /
• pp.36-50
• /
• 2002

Health industry, a knowledge based high value-added industry, is being considered as a strategic area for the 21C and many advanced countries are making every endeavors for the promotion of health industry along with information technology, new materials, and mechatronics. Korean health industry, however, has been excluded from the governmental supports as well as bound by strict regulation so far, and there is a significant gap in technology compared with advanced countries. In 21C, technology is the main factor of national competitiveness and that is why the role of R&D institutes are so important in the high level of competition to cope with the technology protection policies of advanced countries. In this article, with Directory of Korean R&D Institutes published by Korea Industry Technology Association, I reviewed the trends of R&D institute of health industry. Main findings of the research can be summarized as follows. The portion of health industry R&D institute is 3.6% of total R&D institute but the amount of R&D investment is over than 5% This means health industry are knowledge based and R&D intensified industry, meanwhile the variations of same industry R&D institutes of health industry is huge in R&D investments and other activities. Regional distributions of health industry institutes show some kind of different patterns in each industry areas. Medical devices and Medical informatics's preference of metropolitan region are distinguished with other industry areas. Many of the institutes are located in same site of it's company rather than operating separate building for R&D specific uses. It is better for transforming ideas to products and close cooperation of research body with product lines, but it is a handicap for networking and communicating with other research institutions too. It takes 18.4yrs for bearing R&D institute on the average. For a long times 'copy products' or 'me too products' policies were easy way to maintain business entities. But recently, it is recognized that research activities are essential component of sustaining it's own business firms. This means technology itself is leading power of corporation itself in the high level of competition.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.475-481
• /
• 2019

The paradigm of convergence R&D is shifting from the convergence of technologies to the convergence of solutions to solve the complex problems of scientific and social development. On the other hand, it is prevalent that there is a lack of convergence in our research field. Although Korea has invested heavily in fusion research and development, Korea has mainly focused on the application and development of technology, so failed to plan convergence R&D in line with the new paradigm. Therefore, in this study, we searched for convergence R&D area that is being done to solve social problems, and tried to make use of data-driven objective methods. For this purpose, we used the investment information of global R&D projects that had no retrospective properties and derived the convergence R&D area related to coastal flooding.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• 디지털융복합연구
• /
• 제9권6호
• /
• pp.231-242
• /
• 2011

본 연구는 문화콘텐츠산업 중 캐릭터산업의 권역별 경쟁력을 권역별 산업체수, 종업원 수, 매출액에 기초한 LQ 입지계수로 분석하였다. 또한 세부적으로는 캐릭터산업의 R&D 역량 측면의 권역별 경쟁력을 파악하기 위해 기술, 인력, 인프라, 네트워크 역량을 기준으로 권역별 강점과 약점을 분석하여, 비교 우위의 경쟁력을 제시하였다. 권역별 입지분석 평균지수를 살펴보면 수도권이 포함된 경우 기업 매출에 있어 모든 권역이 LQ지수 1이상의 경쟁력을 보임에 따 라 평균적으로 모든 권역이 경쟁력을 보였다. 수도권을 제외한 경우는 제주권, 동남권이 경쟁력이 있는 것으로 나타났다. 권역별 캐릭터산업의 R&D 성과를 분석하기 위한 기술, 인력, 인프라, 네트워크 역량에서는 서울 및 수도권 권역이고 경쟁력으로 분석되었다. 종합적으로 분석해 볼 때 권역별 캐릭터 산업의 경쟁력은 수도권, 제주권, 동남권이 비교우위에 있는 것으로 분석되었다.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.683-691
• /
• 2020

In the era of super-aged societies, research and development (R&D) projects related to aging are very important agenda for establishing the direction of future R&D planning and technological competitiveness in the country. In order to respond promptly to this agenda, it is essential to establish a national-level convergence R&D policy. In this study, we utilized the global R&D funding project data from major nations (US, Europe, Japan), and then standardized them with the same fields. To analyze the current status of global R&D related to aging, we performed cluster analysis based on the co-occurrence matrix to explore convergence R&D areas in the US, Europe, and Japan related to aging. In addition, comparative analysis by country suggested that different points on the interdisciplinary area and the convergence of aging-related R&D by each country. These results provide fundamental understandings for the status of convergence in aging-related global R&D, the current technology trends, and establish the direction and strategy of R&D policy.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.281-285
• /
• 1990

Our N.C. sewing machine is a device that acts sewing automatically in reference to N.C. data made by data input device. Our N.C. sewing mechine is composed of induction motor that has electric clutch and brake, step motor that drives x-y table. Sewing area of our machine is 170 mm * 100 mm, maximum sewing speed is about 2000 spm, maximum stitch length 6.2 mm. In actual sewing, synchronization between motion of needle up-down and motion of x-y table is a critical factor. In this paper, technology about synchronization will be profoundly discussed.

• 한국융합학회논문지
• /
• 제8권7호
• /
• pp.265-272
• /
• 2017

서울시와 미래창조과학부는 4 차산업을 이끌어갈 미래성장동력의 거점으로 양재지역에 "R&CD 클러스터" 조성을 추진하고 있다. 양재지역은 대기업 연구소 및 ICT중소기업이 다수 밀집되어 있고 서울의 남쪽에 위치하여 교통, 교육, 여가생활 등의 지리적 이점을 갖고 있다. 양재지역의 성공적인 클러스터 조성을 위한 초기연구로 정량적 분석으로 "한국 SMTp 2017 DVD ROM"의 한국 기업정보 DB 및 콘텐츠를 활용하여 양재지역의 ICT 중소기업의 현황을 파악하였고 정성적 분석으로 2016년 12월 8일부터 2017년 1월 7일 동안 설문을 실시하여 ICT기업의 R&D활동을 조사하였다. 마지막으로 양재지역 ICT기업의 R&D역량 강화를 위한 시사점을 도출하였다.

• 디지털산업정보학회논문지
• /
• 제14권3호
• /
• pp.115-125
• /
• 2018

In order to examine the ways to improve the efficiency of R&D investment, this paper presents analysis on both quantitative and qualitative efficiency of R&D projects. As Korea's R&D investment has significantly increased in recent years, the efficiency of R&D investment has attracted attention. In this paper, a Data Envelopment Analysis(DEA) method is used to construct models for quantitative efficiency and qualitative efficiency analysis. Based on a cases of agricultural R&D projects of Korea, the efficiency of national R&D projects were analyzed and their quantitative and qualitative efficiencies are compared. As a result, statistically significant difference between quantitative and qualitative efficiency was found. Also, characteristics of Decision Making Units(DMUs) which can influence both quantitative and qualitative efficiency were identified. In particular, the stage of a R&D project has significant impact on R&D efficiency. This study suggests that in order to enhance R&D efficiency both quantitative and qualitative nature of outputs should be considered when measuring R&D efficiency.