• Macromolecular Research
• /
• v.17 no.3
• /
• pp.168-173
• /
• 2009

This study reports the preparation and characterization of nanohydrogels by using sodium alginate as a model material. Alginate nanohydrogels (ANH) were prepared by emulsification-diffusion method in a w/o system with 1,2-diacyl-sn-glycero- 3-phosphocholin as the lipophilic surfactant. The effects of the alginate to surfactant ratio and the remaining water contents on the mean particle size and swellability of ANHs were investigated in terms of the concentration, agitation speed, and agitation time. The feasibility of using nanohydrogels and their controllability were proved by the water the absorbency of ANHs during a 7-day evaluation by dynamic light scattering. In this work, the mean particle sizes of ANHs could be controlled from 49.2 nm (measured in ethanol phase) to $1.9{\mu}m$ (measured in water phase, after 7 days of water absorption).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.754-757
• /
• 2008

R&D의 경제성장 기여도에 대한 인식이 높아짐에 따라 매년 국가연구개발사업의 투자규모는 큰 폭으로 증가하였으나 연구개발의 생산성은 저조하다는 비판이 제기되고 있다. 본 연구는 연구성과 평가시스템 중 논문의 자료 수집 검증 평가에 대한 범위에서 그동안의 양적위주의 평가에서 탈피하여 연구성과에 대한 체계적이고 심층적인 분석을 통하여 논문의 질적평가의 반영을 목적으로 현재 연구성과 평가기스템의 문제점 분석을 통한 개선 방안에 대해 연구하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.707-710
• /
• 2007

모바일 단말이 이종네트워크 환경에서 멀티미디어 데이터를 스트리밍 수신 받으며 이동하는 경우, 특성이 다른 링크로 옮겨감에 따라 링크의 적정 대역폭에 맞지 않은 스트림 전송률 때문에 전송 성능이 떨어진다. 본 논문은 Mobile IPv6 에서의 링크 특성 정보 전달방법을 이용하여 스트리밍 전송 성능을 높일 수 있음을 보인다. 이를 위해서 실제로 링크 특성 정보 전달 방법이 적용된 Mobile IPv6 테스트 베드를 설계하여 MN 에 링크 특성 추출 기능을 구현하였고, CN 에 데이터 전송율을 조절할 수 있는 UDP 스트리밍 서버 기능을 구현하였다. 스트리밍 데이터를 수신하는 MN 이이종 네트워크 환경간을 핸드오버할 때에 전송 성능이 향상됨을 실험을 통하여 보인다.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.293-299
• /
• 2005

Automatic reclosing is a typical protection method in power distribution systems for the clearing of temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces repetitive voltage sags. In this paper, we explored the repetitive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were carried out for obtaining the susceptibility of voltage sags. The final results of the tests yielded power acceptability curves of voltage sag, and the curves transformed the 3-dimensional CBEMA (Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of repetitive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of repetitive voltage sags.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.236-242
• /
• 2021

In this paper, we report the fabrication of the tip-on-gate of a field-effect-transistor (ToGoFET) probe using a standard complementary metal-oxide-semiconductor (CMOS) process and the performance evaluation of the fabricated probe. After the CMOS process, I-V characteristic measurement was performed on the reference MOSFET. We confirmed that the ToGoFET probe could be operated at a gate voltage of 0 V due to channel ion implantation. The transconductance at the operating point (Vg = 0 V, Vd = 2 V) was 360 ㎂/V. After the fabrication process was completed, calibration was performed using a pure metal sample. For sensitivity calibration, the relationship between the input voltage of the sample and the output current of the probe was determined and the result was consistent with the measurement result of the reference MOSFET. An oxide sample measurement was performed as an example of an application of the new ToGoFET probe. According to the measurement, the ToGoFET probe could spatially resolve a hundred nanometers with a height of a few nanometers in both the topographic image and the ToGoFET image.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.113-121
• /
• 2013

The structural steel produced in domestic is classified into 5 grades. For economic structural design, the structural engineers need to choose optimal steel grades for structural member types, but the related data is not sufficient. Recently, high strength steel with yield strength in 650MPa was developed in domestic. It provides structural engineers with the wider range of structural steel strength, which leads to the larger difference in economic evaluation. In this paper, the economic evaluation of high-strength steel in building structures is investigated, by applying structural steel with 235MPa, 325MPa and 650MPa in yield strength to various types of structural members, and can be used as basic data for economic structural design.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.19-27
• /
• 2015

Purpose: A system to measure the visibility of agricultural tractor operators was designed and evaluated according to ISO standards, and a blind area diagram around the tested tractor was created based on the manual method recommended by the National Institute for Occupational Safety and Health (NIOSH). Methods: A visibility measurement system was designed and evaluated based on the ISO 5006 and ISO 5721-1 standards. Two bulbs used to simulate the operator's eyes were mounted on a bar with a supporting frame. A wooden frame was used to determine the seat index point position. The 12-m visibility test circle was divided into six sectors of vision, and the test tractor was placed at the center of the circle. Artificial light was supplied in the darkened environment, and shadow or masking effects were measured manually around the 12-m circle. Results: When the bulbs were placed at the operator's eye level, front visibility was good; no masking was found in the "A" vision sector, but larger masking widths were found in the "B" and "C" vision sectors. Since the masking width exceeded 700 mm, additional tests, such as movement of the light sources to both sides of the operator's eye level, were performed. Less than six masking effects were found in the semi-circle of vision to the front, and more than one masking was found in the "B" and "C" visual fields. The minimum distance between the centers of two masking effects exceeded 2500 mm when measured as a chord on the semi-circle of vision. A blind area diagram was created to define the exact nature of the blind spots and mirror visibility. Conclusions: Visibility evaluation is an effective way to enable proper and safe operation for agricultural tractor operators. Inclusion of this visibility evaluation test in the general testing process might aid tractor manufacturers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.780-785
• /
• 2016

Heavy oil used as ship propulsion has a serious issue regarding exhaust emission of global warming. Recently, among large-scale merchant ships are using LNG as green ships so called ech-ships. In this study, an vaporizer and pipes under cryogenic and high pressure load were considered to evaluate structural integrity according to codes. Structural analysis of the vaporizer and pipes was performed using the commercial code, ANSYS. Integrity evaluation of the vaporizer based on von Mises stress was performed in accordance with allowable stress specified in ASME Boiler & Pressure Vesssel Section VIII Division 2. To assess structural integrity of the pipes, stress components were combined and compared with ASME B31.3. The calculated stresses for all load cases are lower than allowable stresses, therefore the structural integrity of equipments are verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.77-83
• /
• 2008

In terms of saving costs, energy and materials, the weight of cars has been gradually reduced by optimizing design of structure, which also gives us good performance. In compliance with this, it should satisfy the lifetime of cars for 25 years under the operation. The purpose of this study is to evaluate the strength of fatigue using date from strain gauges attached carbody and bogie frame. This dynamic stress can be evaluated using S-N curve based on stress amplitude. Modified S-N curve by CORTON-DOLAN is used for more conservative and substantial evaluation. In addition, !he loadings itself of carbody and bogie frame are considered by calculating the rate of the differences which are occurred between empty car and fuiiy occupied car with passengers. Rainflow cycle counting method is applied to arrange the stress data for the modified S-N curve to predict lifetime of the materials. Conclusively the cumulative damages are not only calculated by Miner's Rule, but the safety factors are also determined by Goodman diagram.

• Journal of Korean Academy of Nursing
• /
• v.36 no.8
• /
• pp.1324-1330
• /
• 2006

Purpose. This study developed a web-based wound care course for undergraduate nursing students and evaluated the course's content, system, and student-satisfaction. Methods. This study was done in three stages, the development of the web-based wound care course, the implementation and evaluation of the course. The course was developed based on the ARCS model. 80 under-graduate nursing students to Y University in Korea used the web-based wound care program during four weeks. After that, they completed questionnaires, evaluating the contents, system, and their satisfaction. Results. Eighteen learning objectives were used to create the web-based wound care course and the course was developed with 7 chapters and 20 subsections. The analysis of the questionnaires showed a mean score for content and system-related items of 3.04 each, out of a possible 4 points. Student satisfaction items had a mean score of 2.89. Conclusions. The web-based course allowed students access to the course anytime and anywhere, and according to their own learning abilities. However this advantage would only be possible when nurse educators develop qualitative web-based course to meet the demand of a complex health care system as well as the needs of the students and the effectively incorporate it into traditional lectures.