• The Korea Journal of Herbology
• /
• v.38 no.6
• /
• pp.61-71
• /
• 2023

Objectives : This study aimed to find out the future direction of accreditation system of Extramural herbal dispensaries (EHD) by comparing the current criteria of EHD and the existing Korea good manufacturing practice (GMP) regulations. Methods : Among the accreditation criteria of EHD, criteria of general herbal medicine was compared with the pharmaceutical GMP of Korea. The regulations of the accreditation of EHD and the regulations of KGMP were compared and organized with similar things based on the index of KGMP. All criteria from both were extracted for each element, classified into key-words and evaluated by dividing them into the same, similar one and no-matching. Results : Among the 189 criteria of KGMP, 77 criteria were consistent with the accreditation of EHD, and 15 criteria were similar. Based on the accreditation of EHD, 70.4% of the criteria were consistent or similar to KGMP. There were a total of 27 key-words only in the GMP criteria and not in the EHD one. Hence, a total of 25 key-words only in the EHD criteria and not in the GMP one. There were 12 similar key-words, and among them, there were 4 key-words in which accreditation of EHD was more specific than the KGMP. Conclusions : The criteria of general herbal medicine in EHD showed a similar or equivalent level of accreditation criteria compared to that of pharmaceutical GMP in Korea, and it ts believed that it should be considered at the current level to reflect the characteristics of herbal medicine.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.74-74
• /
• 2022

본 연구는 붉나무의 기능성 성분의 산업화 활용을 위한 고품질의 붉나무 1년생 용기묘 대량생산을 위해 실시되었다. 붉나무 1년생 용기묘의 묘목품질의 향상을 위해 다양한 농도의 시비처리하여 우량묘 생산에 적합한 시비수준을 구명하고자 하였다. 시비실험은 무시비구 포함하여 수용성 복합비료 (N:P:K=20:20:20, v/v)를 1,000mg·L^-1, 2,000mg·L^-1, 3,000mg·L^-1 수준으로 실시하였다. 시비처리는 붉나무 용기묘의 간장과 근원경 생장은 1,000mg·L^-1 시비처리구에서 생장이 가장 좋게 나타났으며 시비수준이 증가할수록 감소하는 경향을 보였다. 뿌리형태 특성분석에서도 전체뿌리길이, 투영단면적, 표면적 및 뿌리부피가 간장과 근원경 생장과 동일한 경향을 보이는 것으로 조사되었다. 건물 생산량은 부위별 잎, 줄기, 뿌리 및 전체가 모두 1,000mg·L^-1 시비처리구에서 가장 높았으며, 그 이상의 시비수준에서는 점점 감소하는 경향을 보였다. H/D(Hight/Root collar diameter)율은 전체가 3.82(무시비구) ~ 4.90, T/R(Top/Root)율은 전체가 0.56(1,000mg·L^-1 시비처리구) ~ 0.82로 조사되었다. 시비처리 에 의한 붉나무의 LWR(Leaf dry weight ratio)은 무시비구, SWR(Shoot dry weight ratio)은 3,000mg·L^-1 시비처리구, 그리고 RWR(Root dry weight ratio)은 1,000mg·L^-1 시비처리구에서 유의적 차이를 보이며 높게 나타났다. 묘목품질지수(QI)의 경우 1,000mg·L^-1 시비처리구에서 12.13으로 다른 시비수준들보다 월등히 높았다. 본 실험의 결과를 종합하면, 뿌리발달이 좋은 우량한 붉나무 생산에 적절한 시비수준은 1,000mg·L^-1 정도인 것으로 판단된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.182-199
• /
• 2023

Since 2021, government departments have been promoting Automated Driving Technology Development and Innovation Project as national research and development(R&D) project. The automated vehicles and service technologies developed as part of these projects are planned to be subsequently provided to the public at the selected Living Lab City. Therefore, it is important to determine a spatial area and operation section that enables safe and stable automated driving, depending on the purpose and characteristics of the target service. In this study, the static Operational Design Domain(ODD) elements for Level 4 automated driving services were reclassified by reviewing previously published papers and related literature surveys and investigating field data. Spatial analysis techniques were used to consider the reclassified ODD elements for level 4 in the real area of level 3 automated driving services because it is important to reflect the spatial factors affecting safety related to real automated driving technologies and services. Consequently, a total of six driving mode changes(disengagement) were derived through spatial information analysis techniques, and the factors affecting the safety of automated driving were crosswalk, traffic light, intersection, bicycle road, pocket lane, caution sign, and median strip. This spatial factor analysis method is expected to be useful for determining special areas for the automated driving service.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.159-167
• /
• 2023

Due to the convergence of digital technology and the rapidly changing characteristics of the digital industry, the development projects in each technology field that have been carried out so far have blurred the boundaries of the business, dispersed business effects, and reached the limit in fostering a flexible industry that accommodates technological development. It appears that Therefore, the goal is to support the policy of the digital content development project by suggesting a plan to reorganize the structure and improve the management system of the digital content industry development project to effectively respond to the changing direction of the future digital content industry. Through structural analysis and diagnosis of government supported projects, it was proposed to reorganize the existing 19 key projects and 49 detailed projects into 7 key projects projects and 17 detailed projects. As a plan to improve the project management system, there are too many project implementation agencies and the absence of a general agency for detailed project support management, which limits the promotion of large-scale projects for organic linkage between projects and market creation. To improve this, a general agency that oversees the project management function was selected, and it was suggested that there was a need to unify project management into a general organization to manage the project efficiently.

• Clean Technology
• /
• v.29 no.4
• /
• pp.244-248
• /
• 2023

Recently, displays play an important role in quickly delivering a lot of information. Research is underway to reproduce various colors close to natural colors. In particular, research is being conducted on the light emitting structure of displays as a method of expressing accurate and rich colors. Due to the advancement of technology and the miniaturization of devices, the need for small but high visibility displays with high efficiency in energy consumption continues to increase. Efforts are being made in various ways to improve OLED efficiency, such as improving carrier injection, structuring devices that can efficiently recombine electrons and holes in a numerical balance, and developing materials with high luminous efficiency. In this study, the electrical and optical properties of the seven-layer stacked structure rear-light emitting blue OLED device were analyzed. 4,4'-Bis(carazol-9-yl)biphenyl:Ir(difppy)2(pic), a blue light emitting material that is easy to manufacture and can be highly efficient and brightened, was used. OLED device manufacturing was performed via the in-situ method in a high vacuum state of 5×10-8 Torr or less using a Sunicel Plus 200 system. The experiment was conducted with a seven-layer structure in which an electron or hole blocking layer (EBL or HBL) was added to a five-layer structure in which an electron or hole injection layer (EIL or HIL) or an electron or hole transport layer (ETL or HTL) was added. Analysis of the electrical and optical properties showed that the device that prevented color diffusion by inserting an EBL layer and a HBL layer showed excellent color purity. The results of this study are expected to greatly contribute to the R&D foundation and practical use of blue OLED display devices.

• Clean Technology
• /
• v.29 no.4
• /
• pp.262-271
• /
• 2023

Globally, the amount of waste plastics has been occurring to environmental problems. As a result, it is necessary to research methods that utilize waste plastic pyrolysis oil (WPPO) produced by pyrolysis. One such method being studied is utilizing WPPO as a naphtha feedstock. In this study, five types of WPPO were analyzed to determine whether they can be used as raw materials for naphtha. Because of their wide boiling point range, the WPPOs were fractionated into light and heavy fractions through vacuum distillation, and the separation and purification techniques were analyzed using GC-VUV to determine the content of paraffin, olefin, and other compounds. All WPPOs showed high olefin content regardless of the source and fraction. Aromatic and paraffin content varied depending on the source, and oxygen and other compounds also varied significantly by source and fraction. In addition, the light fraction showed a carbon distribution similar to that of naphtha, whereas the heavy fraction showed a carbon distribution of C₁₁ ~ C₁₄. In conclusion, additional processes and raw material selection are required to utilize waste plastic pyrolysis oil as a raw material for naphtha.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.27-33
• /
• 2023

Recently, water shortages have occurred due to climate change, and the need for water management of agricultural water has increased due to the occurrence of algal blooms in reservoirs. Existing algae prevention is operated by putting many people on site and misses the optimal spraying time due to movement through boats. In order to solve this problem, it is necessary to block contamination in advance and move within time to uniformly spray complex microorganisms uniformly. Control drones are used for pesticide spraying and can be applied to algae prevention work by utilizing control drones. In this paper, basic research for the establishment of a marine control system was conducted for application to the reservoir environment, and as one of the results, the characteristics of a drone nozzle, a core technology that can be used for control drones, were calculated. In particular, it was found that the existing agricultural control drones had a disadvantage that the concentration was non-uniform within the suggested spraying interval, and to compensate for this, nozzle positioning and nozzle spraying uniformity were calculated. Based on the experimental results, we develop a core algorithm for establishing an algal bloom monitoring system in the reservoir environment and propose a precision control technology that can be used for marine control work in the future.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.41-58
• /
• 2023

As naval warfare changes to composite warfare that includes simultaneous engagements against surface, underwater, and air enemies, performance and tactical analysis are required to respond to naval warfare. In particular, for practical analysis of composite warfare, it is necessary to study engagement simulations that can appropriately utilize the limited performance resources of the detection system. This paper proposes a DEVS (Discrete Event Systems Specifications)-based simulation model for composite warfare analysis. The proposed model contains generalized models of combat platforms and armed objects to simulate various complex warfare situations. In addition, we propose a detection performance allocation algorithm that can be applied to a detection system model, considering the characteristics of composite warfare in which missions must be performed using limited detection resources. We experimented with the effectiveness of composite warfare according to the strength of the detection system's resource allocation, the enemy force's size, and the friendly force's departure location. The simulation results showed the effect of the resource allocation function on engagement time and success. Our model will be used as an engineering basis for analyzing the tactics of warships in various complex warfare situations in the future.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.483-490
• /
• 2022

Floating LiDAR is a system that provides a new paradigm for wind condition observation, which is essential when creating an offshore wind farm. As it can save time and money, minimize environmental impact, and even reduce backlash from local communities, it is emerging as the industry standard. However, the design and verification of a stable platform is very important, as disturbance factors caused by fluctuations of the buoy affect the reliability of observation data. In Korea, due to the nation's late entry into the technology, a number of foreign equipment manufacturers are dominating the domestic market. The west coast of Korea is a shallow sea environment with a very large tidal difference, so strong currents repeatedly appear depending on the region, and waves of strong energy that differ by season are formed. This paper conducted a study examining buoys suitable for LiDAR operation in the waters of Korea, which have such complex environmental characteristics. In this paper, we will introduce examples of optimized design and verification of ship-type buoys, which were applied first, and derive important concepts that will serve as the basis for the development of various platforms in the future.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.408-419
• /
• 2024

Currently, the airport is expected to improve flight punctuality and operational efficiency after establishing A-CDM, which provides a foundation for mutual cooperation based on an information sharing system among stakeholders. An important element of the A-CDM is to share time information generated by each stakeholder from the arrival of an aircraft to ground operations and departure of the aircraft, thereby supporting timely arrival and departure of aircraft and improving the efficiency and punctuality of airport operations. In the UAM system, a vertiport that plays a role similar to an airport also needs to establish a system to share time information generated by each stakeholder for efficient operation of limited resources. In this regard, a method is needed to identify time information that needs to be shared by each stakeholder and apply technology to share it. In this paper, we propose an application method for system technology that classifies and mutually shares time information generated by stakeholders related to Vertiport operation according to data characteristics.