• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.523-526
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quailty alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70t/y and the pi lot plant of 360 t/v had been developed. Main research contents in this step were the process performance test of pilot plant ot 360ton/year and the development of demonstration plant of 3 000 t/y which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/v showed components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• 한국항행학회논문지
• /
• 제21권6호
• /
• pp.579-584
• /
• 2017

SBAS는 위성기반 항법보정시스템으로 지상국에서의 GNSS신호 분석을 기반으로 정지궤도위성을 통해 GNSS신호의 보정정보와 무결성정보를 제공하는 시스템이다. 한국형 SBAS인 KASS는 2022년 APV-1급 SoL서비스를 목표로 하고 있다. SoL서비스를 제공하기 위해서는 충분한 각종 지상 및 비행시험이 사전에 수행되어야 한다. 그러나 국내에서는 아직 한국형 SBAS인 KASS가 증축되지 않은 관계로 구체적 세부 평가항목이 제시되어 있지 않다. KASS와 호환성이 가장 높을 것이라 예상되고 현재 개발 후 서비스되어 지고 있는 EGNOS는 평가항목이 이미 제시되어있다. 본 논문에서는 EGNOS 구축에 적용된 규정서를 분석하여 비행시험시 요구되는 지상 및 비행시험 평가항목들의 기준을 분석하였고 이는 향후, 국가가 수행하는 비행점검 과정에 참고 될 수 있을 것으로 기대된다.

• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.49-57
• /
• 2021

In the production power transmitting of a floating production system like a wind offshore floating, the power cable should be connected from the surface system into the subsea system. The connection between the surface and the subsea system will make the power cable get a dynamic load like current and wave forces. Based on this condition, a dynamic power cable is required to endure external physical force and vibration in the long-term condition. It needs more requirements than static power cable for mechanical fatigue properties to prevent failures during operations in marine environments where the external and internal loads work continuously. As a process to verify, the durability test of dynamic power cables under the marine operation environment condition was carried out by using domestic technology development.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.504-510
• /
• 2019

본 연구에서는 동력수상레저기구 조종면허의 기존 수기채점방식을 전자채점방식으로 전환할 수 있도록 실기시험항목을 분석하여 현재의 실기시험 시스템의 개념을 해치지 않는 범위 내에서 디지털화할 수 있는 방안을 모색하고, LiDAR센서와 WAVE통신을 통한 전자채점 시스템을 개발했다. 연구를 통해 얻은 결과는 다음과 같다. 첫째, 시험선에서는 LiDAR 및 시험관 평가입력장치를 통해 입력된 채점 데이터가 통합처리장치에서 WAVE통신을 통해 육상 관제센터로 전송되어 응시자의 데이터를 저장/관리할 수 있는 시스템을 구축 및 검증했다. 둘째, 사행 과제를 평가함에 있어서 기존에 목시관측 또는 막대기를 사용한 것을 대신하여 LiDAR를 이용함으로써 정확한 거리측정이 가능해졌고, 정확한 거리정보를 시험선 통합처리장치를 통해 시험관 평가입력장치에 신속하게 표출했다. 셋째, 시험선에서 취득한 평가점수 데이터를 육상 관제센터로 유실없이 고속으로 전송하기 위해 활용한 WAVE통신에서 원활한 전송 및 처리가 가능함을 확인했다.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.170-175
• /
• 2013

For this study, the domestically developed bootstrap reservoir of the aircraft is set up in accordance with the temperature and humidity conditions depicted on the qualification test, and the variation in the internal pressure of the bootstrap reservoir of the aircraft is examined. The study shows that the bootstrap reservoir has less variation in the internal pressure at room temperature than at low temperature($-40^{\circ}C$). As a result, the internal pressure can be maintained stably when the temperature of working fluid in the bootstrap reservoir and the atmosphere environment is over room temperature($25^{\circ}C$). Therefore the keeping of temperature above room temperature is very important to operate the bootstrap reservoir of the aircraft properly.

• 멤브레인
• /
• 제19권3호
• /
• pp.173-182
• /
• 2009

심층형여과 카트리지필터는 반도체 등 전자재료, 식음료, 각종 안료, 페인트, 잉크 등의 공정용 카트리지 필터로서 널리 사용되고 있는 필터이다. 이러한 공정용 카트리지 필터의 여과특성과 심층형여과 카트리지 필터의 종류, 제조업체 및 전세계 시장동향을 살펴보고, 심층형여과 카트리지 필터의 고장사례현황 및 원인규명과 함께, 신뢰성평가 방법에 대하여 고찰하였다.

• 경영과정보연구
• /
• 제22권
• /
• pp.1-23
• /
• 2007

This paper investigates the relationships between exports, firm size, and firm dynamics. It is based on a longitudinal data covering listed firms in the Korean manufacturing industry. We found the stylized fact that the probability that a firm is exporter increases with firm size. A regression model for the determinant of export/sales ratio including dynamic adjustment process is tested on a cross-section sample for the year 2001. Empirical findings suggest that there is a positive and inversely U-shaped relationship between firm size and export/sales ratio, just for basic material and capital good industry. Except for firm size, the hypotheses concerning human capital intensity, physical capital intensity, R&D intensity, and patent are rejected. Using Granger causality test, we found that the rate of growth of total sales influences the change of the export/sales ratio with time lag for medium-sized firms. Finally, some policy implications are presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.179-182
• /
• 2007

In recent, recycling of plastic material has became a major issue due to the landfills and environmental problem. This study investigated fluidity of thermoplastic vulcanizate(TPV), which is for automobile component parts such as weather strip in order to replace ethylene propylene rubber (EPDM). So, using the spiral flow test mold and panel cover mold, we conducted an experiment on fluidity of TPV with injection molding. As results of injection molding experiment, the recycled TPV's flow length was a little bit longer than virgin TPV and a case of panel cover, the filled weight was almost same quantity.

• 소성∙가공
• /
• 제16권4호
• /
• pp.271-275
• /
• 2007

These days, recycling of plastic material has become a major issue due to the landfills and environmental problem. This study investigates the fluidity of thermoplastic vulcanizate(TPV), which can be used for an automobile part such as a weather strip, in order to replace ethylene propylene rubber(EPDM). Injection molding experiments with the spiral flow test mold and panel cover mold are conducted to examine the fluidity of TPV during injection molding. It is found out that the recycled TPV's flow length is a little bit longer than the virgin TPV. However, the filling weight for a panel cover parts by a recycled TPV is almost the same as that by a virgin TPV.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.85-90
• /
• 2014

In this paper, the transient thermal and residual stress analysis of the welding of 9% Ni steel plates using the FEA software ABAQUS are presented. The 9% Ni steel plates are welded manually with welding consumables of 70% Ni based Inconel type super-alloys (YAWATA WELD B (M)), producing a multi-pass/multi-layer butt weld. For these materials, temperature dependant mechanical and thermal material properties are used in the analysis. The back gouging is considered in welding process simulation. The FE thermal results are validated by comparing the real fusion profile and heat affected zone (HAZ). In addition, the continuous indentation test was conducted to measure the strength of base metal, HAZ and weld metal.