• Journal of Information Technology Services
• /
• v.7 no.3
• /
• pp.31-45
• /
• 2008

The number of national research and development(R&D) projects have been continually increased, and it is necessary that the efficiency of investment of R&D projects have been improved during the last two decades. also the government has improved national R&D process and supporting tools for the projects. However, it is not enough to develop a quality model to evaluate the projects systematically. Therefore, a quality model for national R&D projects need to be revised. The quality model for the projects should be based on the global standard(ISO/IEC 9126). In this paper, the authors proposed a quality model for national R&D projects and took a case study for verification of the quality model. The quality model is defined in terms of functionality, reliability, usability, efficiency, portability and maintainability. Also, the authors suggest metrics for measuring the quality of products or services. finally, The productivity and quality of national R&D projects will be improved by the quality model.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.7
• /
• pp.1285-1289
• /
• 2016

A split-column photobioreactor (SC-PBR), consisting of two bubble columns with different sizes, was developed to enhance the photon utilization efficiency in an astaxanthin production process from Haematococcus lacustris. Among the two columns, only the smaller column of SC-PBR was illuminated. Astaxanthin productivities and photon efficiencies of the SC-PBRs were compared with a standard bubble-column PBR (BC-PBR). Astaxanthin productivity of SC-PBR was improved by 28%, and the photon utilization efficiencies were 28-366% higher than the original BC-PBR. The results clearly show that the effective light regime of SC-PBR could enhance the production of astaxanthin.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.5-9
• /
• 2016

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.141-145
• /
• 2005

DME (Di-Methyl Ether) is a new clean fuel and an environmental-friendly energy resource, also is recently increasing with an alternative interest because of the industrial use. DME has been shown to have excellent properties as a diesel fuel giving emission level better than ULEV standard. So it has been attracting considerable as an alternative diesel fuel. In this study, we carried out simulation of separation and purification process of demo plant for 101on per day DME production, which cause the effect that is important in productivity, from operation results of pilot plant for 50kg per day DME production. The liquefied stream, which was separated by gas-liquid separator after DME reactor, includes $CO_2$, DME, Methanol and $H_2O$. We established three distillation columns for separation and purification of the stream. $CO_2$ was extracted from the stream by first distillation column, DME was extracted by second column and Methanol was extracted by third column. We investigated and analyzed the effect which the actual operation variables cause in efficiency of process and optimized process, finally we got the DME of purity $100\%$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.232-235
• /
• 2002

Recently developed liquid silicone rubber (LSR) can be cured by platinum catalyzed additional hydrosilylation mechanism and has the advantage of no byproduct compared to traditional millable peroxide curing silicone rubber. We investigated the characteristics of dielectric breakdown of silicone rubber and adhesion properties between semi-conductive LSR and insulating LSR for high voltage application of pre-molded joint (PMJ). In order to understand the dielectric breakdown characteristics, we used the sheet samples and the paired type rogowski insert electrode system. The breakdown strength and adhesion strength of LSR (E-3) were superior to those of several silicone rubbers. Adhesion strength could be improved by curing at high temperature without post-curing process or enhanced by post-curing process. When LSR (E-3) was cured at $(150^{\circ}C{\times}10min$ semi-conductive )${\times}$ ($175^{\circ}C{\times}10min$ insulation), it showed the high breakdown strength with low standard deviation, and good adhesion strength. In this results, we could apply this process to the fabrication of PMJ without post-curing.

• Journal of Animal Environmental Science
• /
• v.20 no.2
• /
• pp.69-76
• /
• 2014

This study was aimed at investigating a filtration bed system for the production of liquid fertilizer using wastewater generated after anaerobic digestion of animal manure. Slurry, Compost, & Biofiltration-Methane System, designed by Korean National Institute of Animal Science, is now a standard method to recycle anaerobic digestion wastewater. However, currently provided protocol to run the system needs continuous upgrades as the system is relatively new and can be more cost-effective if few adjustments are made. In this study, we tried to enhance the capability of the system to process anaerobic digestion wastewater by replacing the bed materials with the cheaper one, and determining the time point of operation from which filtrates can be utilized for fertilization.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.14
• /
• pp.5545-5550
• /
• 2014

Background: Human biological materials from cancer patients are linked directly with public health issues in medical science research as foundational resources so securing "human biological material" is truly important in bio-industry. However, because South Korea's national R and D project lacks a proper managing system for establishing a national standard for the outputs of certain processes, high-value added human biological material produced by the national R and D project could be lost or neglected. As a result, it is necessary to develop a managing process, which can be started by establishing operating guidelines to handle the output of human biological materials. Materials and Methods: The current law and regulations related to submitting research outcome resources was reviewed, and the process of data 'acquisition' and data 'distribution' from the point of view of big data and health 2.0 was examined in order to arrive at a method for switching paradigms to better utilize human biological materials. Results: For the deposit of biological research resources, the original process was modified and a standard process with relative forms was developed. With deposit forms, research information, researchers, and deposit type are submitted. The checklist's 26 items are provided for publishing. This is a checklist of items that should be addressed in deposit reports. Lastly, XML-based deposit procedure forms were designed and developed to collect data in a structured form, to help researchers distribute their data in an electronic way. Conclusions: Through guidelines included with the plan for profit sharing between depositor and user it is possible to manage the material effectively and safely, so high-quality human biological material can be supplied and utilized by researchers from universities, industry and institutes. Furthermore, this will improve national competitiveness by leading to development in the national bio-science industry.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.39-42
• /
• 2006

There are various analysis functions(including prediction of path loss, analyzing of capacity and coverage, etc.) of simulation tool to design and optimize the mobile communication network. Its reliability absolutely effects the performance of mobile communication network. Especially as the wireless network highly advancing focused on data service, it more needs to research and develop on the standard establishment of reliability of the simulation tool. Also it is important the systematic research how to improve the reliability of simulation tool. In this paper, to give the concrete process and skill about how to improve reliability, we define the kinds of reliability at first. And then we explain the comparison results between real field measurement data and theoretic simulation data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.854-862
• /
• 2018

The Government R&D budget for 2019 exceeded 20 trillion won in order to develop future growth market such as basic research investment and creation of growth engine. As such, the importance of R&D investment is increasing, and various schemes for enforcing efficient and transparent business expenses are being expanded. However, research expenses (Charge ratio) such as fraudulent execution of funds are continuously being generated, and a system of imposition of sanctions is being introduced. In this paper, the legal grounds of sanctions, comparative review of laws and regulations between the ministries, and the criteria of imposition (imputation) were analyzed. In addition, since the amendment of the standard for imposing the intergovernmental surcharges, a single standard has been applied, and the transition process of the surcharging system has been reviewed. As a result of the data analysis, it was found that they focused on micro - utility activities and suggested new policy measures corresponding to them. The Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.747-753
• /
• 1986

This paper describes the design and fabrication of a digital volume control integrated circuit which replaces a mechanical volume control. The integrated circuit can be controlled volume by up/down switch. It has been fabricated by SST bipolar standard process. Its chip size is 2.5x2.5 mm\ulcorner As a result, we succeeded in fabrication of integrated circuit which satisfied DC characteristics and proper operation of volume control.