• Corrosion Science and Technology
• /
• v.20 no.6
• /
• pp.361-366
• /
• 2021

Localized corrosion behavior of Ni-based Inconel 718 alloy was investigated by electrochemical anodic polarization techniques in NACE TM 0177 A solution of 5 wt% NaCl + 0.5 wt% acetic acid at room temperature. After the solution heat treated at 1080 ℃ for 2.5 h, Inconel 718 was age-hardened at 780 ℃ for 8 h. The microstructure of the alloy surface was investigated by optical microscopic or scanning electron microscopic technique. The austenitic phase with the presence of metal carbides was observed on the surface of Inconel 718. Metal-carbides such as Nb-Mo and Ti-carbide with diameters of approximately 10 and 3 ㎛, respectively, were formed in Inconel 718. Anodic polarization results revealed that localized corrosion was observed at the interface between austenitic phase of a substrate and metal carbides. Difference in electrochemical property between a metal carbide and an austenitic substrate could provide an initiation site for localized corrosion of Inconel 718 surface.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.404-406
• /
• 1998

Analysis for the imidazoline type cationic surfactants was performed by the gas chromatography(GC) and high performance liquid chromatography(HPLC). The composition of the alkyl chain distribution was investigated by GC after base/Acid hydrolysis of the imidazoline ring. The distribution of total alkyl chain was separated clearly by a Bondclone C18/NOVA-Pak C18 HPLC column using 50% acetonitrile in methanol containing 0.1M sodium perchlorate as a mobile phase. Alkyl chain distribution and average molecular weight of imidazoline type cationic surfactants were obtained based on these analytical methods. The agreement of results from GC and HPLC was good. The detection limit of imidazoline by HPLC method was 10ng without pretreatment.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.59-67
• /
• 2007

Recovery of acids from the waste etching solution of containing acetic, nitric and hydrofluoric acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. EHA(2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitric and hydrofluoric acid as a extraction agent was used to the experiment to obtain the process design data in separation procedure. From the experimental data and McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate each acid sequently from the mixed acids. The recovery yield was obtained above 90% for acetic acid from the acid mixtures, 90% for nitric acid from acetic acid extraction raffinate and then above 67% for hydrofluoric acid from final extraction raffinate.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.1
• /
• pp.18-23
• /
• 2005

Effect of cold rolling on microstructural changes has been investigated for a Zn-15%Al alloy to elucidate the reason for its work softening behavior. Fully annealed microstructure of the Zn-15%Al alloy is characterized by ${\eta}$ grains and (${\eta}+{\alpha}$) lamellar colonies, where ${\eta}$ and ${\alpha}$ are Zn-rich HCP and Al-rich FCC phases, respectively. The hardness decreases continuously with increasing cold rolling degree, exhibiting work softening behavior. It is revealed that during the cold rolling, (${\eta}+{\alpha}$) lamellar colonies gradually change into equiaxed ${\eta}$ and ${\alpha}$ grains due to dynamic recrystallization at room temperature, while pre-existing ${\eta}$ grains are only deformed without recrystallization. Furthermore, cold rolling causes the precipitation of dissolved Al solutes in ${\eta}$ grains. In view of these results, change of (${\eta}+{\alpha}$) phases from lamellar to equiaxed morphology, which results in structural softness and increase in equiaxed ${\eta}/{\alpha}$ grain boundaries with higher mobility, and deterioration of solution hardening by precipitation of Al solutes from ${\eta}$ grains, are thought to contribute to the work softening of Zn-15%Al alloy.

• Journal of Hydrogen and New Energy
• /
• v.20 no.1
• /
• pp.22-30
• /
• 2009

Energy environment has been changing rapidly such as the fluctuation of oil prices and the effect on UNFCCC. Oil price change affects Korea's economy heavily due to her poor natural resources and large dependence of consumed energy resources. Korea takes the 4th place of importing the crude oil and 9th place in $CO_2$ emissions with the 1st place of $CO_2$ emissions increasing rate. Considering the current statue of Korea including oil price change and UNFCCC, Korea will be expected to be the Annex I nation due to Korean energy environments and the quantity of $CO_2$ emission. Energy technology development is a crucial key to cope with Korea's national energy security and environments. In this study, we establish the framework, which allocates the relative weights of assessment criteria and sub-criteria, for assessing and selecting R&D programs of energy technologies strategically. We integrated fuzzy theory and analytic hierarchy process (AHP) approach since the fuzzy AHP approach reflects the vagueness of human thoughts and perception effectively as making pairwise comparisons of criteria and alternatives. The fundamental data of this research results will support R&D planning phase for policy-makers and the production of well focused R&D outcomes.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.114-119
• /
• 2006

High critical current density, high n value, multiple faults endurances, and fast recovery characteristics of YBCO thin films are very attractive characteristics for developing resistive type superconducting fault current limiters. But due to the limited current and voltage ratings of one YBCO module, it is needed to construct series and parallel module connections for high capacity electric networks. Especially for distribution network, more than 30 units should be connected in series to meet voltage level. So in order to construct distribution-level superconducting fault current limiter, simultaneous quench in one YBCO thin films should be realized, and furthermore, quench should be occurred in all fault current limiting units equally to avoid local heating and failures. In this paper, we proposed optimum design of YBCO thin films for fault current limiting module and technical method using shunt resistor to achieve simultaneous quench between multi current limiting units. From the analytical and the experimental results, optimal current path and thickness of shunt material was determined for YBCO thin films and shunt resistor between modules was developed. Finally, 14 kV one phase resistive fault current limiter using multi YBCO thin films was constructed and it was possible to get satisfactory test results.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2019

In this paper, we studied characteristics of stimulated Brillouin scattering (SBS) suppression in high-power fiber lasers by using apparatuses applying a temperature gradient (i.e. a step, a sine shape, and random temperature distribution) along the fiber. From the ytterbium-doped polarization-maintaining fiber master oscillator power amplifier built in house, we measured the back-reflection spectrum and power for each temperature gradient, showing that the step shape temperature distribution was the most effective way to suppress SBS. In addition, we investigated the interaction of pseudo-random binary sequence phase modulation conditions and temperature gradients for SBS suppression.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.187-194
• /
• 2021

This paper presents a study of laser output characteristics. We fabricated a MOPA (master oscillator power amplifier)-type high-power, narrowbandwidth fiber laser with a bidirectional pumping configuration in its main amplifier. As signal beams, light sources with bandwidths of 3 GHz and 10 GHz-phase-modulated through a PRBS (pseudo-random binary sequence)-were used interchangeably. Furthermore, the characteristics of the SBS (stimulated Brillouin scattering) were analyzed using a signal beam with 3 GHz bandwidth, by adjusting the forward to backward pumppower ratio. Moreover, the characteristics of the transverse mode instability were analyzed by adjusting the forward to backward pump-power ratio, using a signal beam with 10-GHz bandwidth. Finally, the output power from 10 GHz bandwidth was amplified to more than 1 kW using a forward to backward pump-power ratio of 1.6. The beam quality M² was measured to be approximately 1.36, and the optical-to-optical efficiency was 80% at maximum output power.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1807-1811
• /
• 2004

Supercritical fluid chromatography (SFC) was considered for separating racemic ibuprofen. The chromatographic column (3.9 ${\times}$ 150 mm) was packed with Kromasil$^{\circledR}$ CHI-TBB, and the mobile phase was supercritical carbon dioxide with modifier of IPA. The experimental variables were the content of IPA, and temperature and pressure of supercritical mobile phase. To determine the separation condition, the empirical equation of retention factor and resolution was proposed. In the case of retention factor, the empirical equation was in the form, $k\;=\;a{\rho}\;+b/F\;+\;c\;({\rho}/F)\;+\;d$. The empirical equation for resolution was proposed as a linear form, $R\;=\;a{\rho}\;+\;bF\;+\;c$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.726-729
• /
• 2000

Though L $a_{1+x}$S $r_{2-x}$M $n_2$ $O_{7}$ n=2 R-P phases have been well known to have CMR effect, it was generally believed that n=1 phase was insulating. But recently monolayered perovskite $Ca_{2-x}$L $n_{x}$Mn $O_4$phase has been reported to show magnetoresistance. In this study, layered perovskite $Ca_{2-x}$L $n_{x}$Mn $O_4$ (x=0, 0.5, Ln=Pr, Nd, Sm, Gd) phases were synthesized by solid state reaction and their structures were refined by Rietveld method. The space groups of $Ca_2$Mn $O_4$, N $d_{0.5}$C $a_{1.5}$Mn $O_4$phases were refined as C2cb and Fmmm, respectively.y.ely.y.y.y.y.y.y.