• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.5
• /
• pp.244-250
• /
• 2008

This study has investigated the surface phase change, hardness variation, surface precipitates, nitrogen content and corrosion resistance in STS 431 (17Cr-2Ni-0.2C-0.01Nb) martensitic stainless steel after high temperature gas nitriding (HTGN) treatment at the temperature range between $1050^{\circ}C$ and $1150^{\circ}C$. The HTGN-treated surface layer appeared $Cr_2N$ of rod type, carbo-nitride of round type and fine precipitates in the austenite matrix. On the other hand the interior region where the nitrogen was not permeated, exhibited martensite phase. The surface hardness showed 250~590 HV, depending on the HTGN treatment conditions, while the interior martensitic phase represented 520 HV. The permeation depth of nitrogen increased with increasing the HTGN-treated temperature. The nitrogen concentration of the surface layer appeared approximately ~0.17% at $1100^{\circ}C$. On comparing the corrosion resistance between solution-annealed and HTGN-treated steels, the corrosion resistance of HTGN-treated steel was superior to that of solution-annealed specimens.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.624-629
• /
• 2005

The purpose of this study is to investigate the performance of nitrogen removal using autotrophic microorganism in the Membrane-Attached Biofilm Reactor (MABR). The treatment system consists of an aerobic MABR (R1) for nitrification and an anaerobic MABR (R2) for hydrogenotrophic denitrification. Oxygen and hydrogen were supplied through the lumen of hollow-fiber membranes as electron acceptor and donor, respectively. In phase Ι, simultaneous organic carbon removal and nitrification were carried out successfully in R1. In phase II, to develop the biofilm on the hollow-fiber membrane surface and to acclimate the microbial community to autotrophic condition, R1 and R2 were operated independently. The MABRs, R1 and R2 were connected in series continuously in phase III and operated at HRT of 8 hr or 4 hr with $NH_4{^+}-N$ concentration of influent, from 150 to 200 mgN/L. The total nitrogen removal efficiency reached the maximum value of 99% at the volumetric nitrogen loading rate of $1.20kgN/m^3{\cdot}d$ in the combined MABR system with R1 and R2. The results in this study demonstrated that the combined MABR system could operate effectively for the removal of nitrogen in wastewater not containing organic materials and can be used stably as a high rate nitrogen removal technology.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.312-316
• /
• 2005

The single phase induction motor has been commonly applied to small-sized electrical appliances because of its low cost, but it has low efficiency and large torque ripple, and it is incapable of speed control. However, two-phase induction motors have small torque ripple, high efficiency and variable speed control, because they are inverter fed. In this paper, the dynamic characteristics of the two-phase induction motor, such as the torque ripple, current and speed, are analyzed by using the time-stepping finite element method, and compared with the cage-type single phase induction motor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.336-339
• /
• 2007

The enhanced control of OLED deposition processes by Organic Vapor Phase Deposition $(OVPD^{(R)})$ is discussed. $OVPD^{(R)}$ opens a wide space of process control parameters. It allows the accurate and individual control of deposition layer properties like morphology and precise mixing of multi component layers (co-deposition) in comparison to conventional deposition manufacturing processes like e. g. VTE (vacuum thermal evaporation).

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.93-103
• /
• 2024

In the present work, a phase-field model for dendritic solidification is applied to hot-dip ZnAlMg coatings to elucidate the morphology of zinc dendrites and the solute segregation leading to the formation of eutectics. These aspects define the microstructure that conditions the corrosion resistance and the mechanical behaviour of the coating. Along with modelling phase transformation and solute diffusion, the implemented model is partially coupled with the tracking of crystal orientation in solid grains, thus allowing the effects of surface tension anisotropy to be considered in multi-dendrite simulations. For this purpose, the composition of a hot-dip ZnAlMg coating is assimilated to a dilute pseudo-binary system. 1D and 2D simulations of isothermal solidification are performed in a finite element solver by introducing nuclei as initial conditions. The results are qualitatively consistent with existing analytical solutions for growth velocity and concentration profiles, but the spatial domain of the simulations is limited by the required mesh refinement.

• Journal of the Korean Magnetic Resonance Society
• /
• v.16 no.1
• /
• pp.34-45
• /
• 2012

Melanocortin-4 receptor (MC4R) subtype is associated with obese humans. Especially, in a patient with severe early-onset obesity, novel heterozygous mutation in the MC4R gene was detected, resulting in an exchange of aspartic acid to asparagine in $90^{th}$ amino acid residue located in the predicted second trans-membrane domain (TM2). Mutations in the melanocortin-4 receptor (MC4R) gene are the most frequent monogenic causes of severe obesity which have been described as heterozygous with loss of function. In order to compare structure difference between MC4R wild type (MC4R-TM2-wt) and mutant (MC4R-TM2-D90N), we designed both MC4R-TM2-wt and MC4R-TM2-D90N construct in pET 21b vector. In this study, we optimized high-yield purification procedure for recombinant TM2-D90N. Eluted recombinant protein was resolubilized under urea condition for thrombin cleavage reaction and we conducted the high-performance liquid chromatography (HPLC) with reverse phase column under 1% acetonitrile, 0.01% TFA buffer solution. The molecular size of purified target peptide was confirmed by Tricine-SDS page analysis. To characterize MC4R-TM2-D90N, we have performed $^{15}N$-isotope labeling of peptide using M9 media and purified labeled target peptide for hetero-nuclear NMR spectroscopy.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.309-316
• /
• 2017

In injection molding, the quality of an injection molded product varies greatly depending on the molding conditions. Many researche studies have been conducted on the quality analysis of molded parts according to the molding conditions such as injection pressure, injection temperature, and packing pressure. However, there have not been many studies on the V/P switchover timing. It is known that when a large pressure is applied to a cavity in the packing phase, the cavity pressure is most affected by the packing pressure. In addition, depending on the position (timing) of the packing pressure, it can have a direct influence on quality based on the shrinkage and dimensions of the molded parts. In this study, the change in pressure profile in the cavity according to the V/P switchover position is confirmed. A CAE analysis program (Moldflow) was used to simulate and analyze two models using the PC and PBT materials. In order to compare these results with the actual injection molding results, injection molding was performed for each V/P switchover position, and the correlation between simulation and experiment, especially for the shrinkage of molded parts, was evaluated.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.473-474
• /
• 2016

최근 신재생에너지의 보급 정책으로 인해 태양광 또는 풍력과 같은 신재생에너지가 전체 전력 계통에서 차지하는 비율이 증가되고 있는 실정이다. 그러나 신재생에너지는 변동 적이기 때문에 계통의 안정성을 저해하는 원인이 될 수 있다. 이에 따라 각 나라에서는 계통 안정성을 위한 기능들을 요구하고 있으며, 그 요구는 점차 강화되고 있다. 이와 같이 신재생에너지 비율의 증가로 인해 계통 안정성에 대한 문제가 강조되고 있지만, 태양광 분산 발전 시스템의 경우에는 일사량에 의존하여 운전하기 때문에 일사량이 낮거나 야간에는 계통 안정성을 위한 기능을 수행하지 못하는 단점이 있다. 본 논문에서는 일사량이 낮거나 야간에도 계통 안정화를 위해 무효전력 지원이 가능한 확장된 무효전력 운전(EF-RPO: Extended feed-in Reactive Power Operation)방법의 제어 전략을 제안하며, 제안한 방식은 1MVA 계통 연계형 인버터의 제작과 실험을 통해 검증하였다.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.27-34
• /
• 2009

This paper analyze technical review entry criteria and review process based on system property, and review checklist to conform technical review is also showed. The execution of review is determined according to the preparation of review item and identification for risk element. Risk level should be mitigated before technical review by appropriate plan. This paper described the entering condition of technical review for developmental phase, and tailoring consideration for technical review condition. Described technical review entry criteria, review process, and tailoring consideration is applied to development of test equipment for ground ant-air missile system. Applied system specific technical review process, tailored entry condition for test equipment for ground ant-air missile system and review check list is showed and the effectiveness of described system specific technical review process is presented.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.3
• /
• pp.11-16
• /
• 2008

The authors investigated an overhead shuttle (OHS) system for automatic transferring the liquid crystal display (LCD) panels. The constructed tracks of OHS system include the linear and curve regions and have been installed on the ceiling to transfer the cassette of LCD glass along the closed-loop and open-loop tracks. In this study, the OHS system was implemented by a proposed linear motor to solve encoder installation and the system cost problems of the long distance transfer system. In addition, we utilized a new algorithm of the position detection and a new control algorithm for driving linear motor. The newly developed control algorithm was demonstrated from both a computer simulation and an experimentation, indicating that the highly reliable and speedy transfer system can enhance the LCD panel productivity of commercial OHS system.