• Tribology and Lubricants
• /
• v.24 no.4
• /
• pp.196-204
• /
• 2008

In this study, the pressure distributions on the oil film of piston pin bearings are found by two-dimensional lubrication analysis in order to help the optimum design of the bearings of piston pin. The lubrication analysis is carried out together with an equation related with the oil pressure-viscosity index. The oil film pressure distribution is used as an input data for pressure boundary conditions at the piston pin-boss surface. Finally, the piston pin-boss stress distribution coupled with the thermal stress is calculated, and then compared with the results of the stress analysis which is not counted with the oil film pressure boundary condition.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.68-68
• /
• 2017

Measurements of solar wind speed near the Sun (< 0.1 AU) are important for understanding acceleration mechanism of solar wind as well as space weather predictions, but hard to directly measure them. For the first time, we provide 2D solar wind speed maps in the LASCO field of view using three consecutive days data. By applying the Fourier convolution and inverse Fourier transform, we decompose the 3D intensity data (r, PA, t) into the 4D one (r, PA, t, v). Then, we take the weighted mean along speed to determine the solar wind speeds that gives V(r, PA, t) in every 30 min. The estimated radial speeds are consistent with those given by an artificial flow and plasma blobs. We find that the estimated speeds are moderately correlated with those from slow CMEs and those from IPS observations. A comparison of yearly solar wind speed maps in 2000 and 2009 shows that they have very remarkable differences: azimuthally uniform distribution in 2000 and bi-modal distribution (high speed near the poles and low speed near the equator) in 2009.

• Journal of Distribution Science
• /
• v.17 no.1
• /
• pp.89-94
• /
• 2019

Purpose - In recent digital information society, the most important factor of to increase the firm value of the distribution company is not the activity to increase the sales through the general advertisement of the unspecified majority by purchasing the finished product, but to grasp the needs of the consumers and to develop a new distribution platform that connects producers and consumers directly through consumer-tailored advertisements centering on e-commerce. Therefore each company in the distribution industry is spending a lot on research and development investment to innovate the distribution technology and distribution system, and the research and development investment expenditures can affect firm value. The purpose of this study is to analyze the impact of research and development investment expenditures in the distribution industry on market value of the firm. Research design, data, and methodology - As a research method, the sample firms are those which are listed on korea stock exchange market from 2011 to 2017 and the research model is Ohlson(1995) model, which is a representative valuation model using accounting information. This study analyzes the effect of distribution company's research and development investment expenditures and advertising expenditures on market value of the firm Results - The results of empirical analysis show that research and development investment expenditures for developing new distribution technology and advertising expenditures for promoting sales in the distribution company are all positively related to the market value of firm. Therefore, in describing market value of the distribution company, it is shown that the research and development investment expenditures and advertising expenditures together with the net asset and net profit are the important accounting information that explains the market value of firm. This result show that investment expenditures on research and development for the innovation of distribution technology of distribution company creates intangible intellectual assets and increases market value of the firm. Conclusions - The result of this study shows that research and development investment expenditures for the new distribution technology as well as the spending for the advertisement in the future is a very important investment expenditures that can increase the market value of the distribution company.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.209-217
• /
• 2002

Stability deterioration of AKD emulsion was studied with respect of the physical change of emulsion particles and the chemical change of AKD itself. Four kinds of commercial emulsions were kept at RT, 40, 50, and $60^{\circ}C$ water bath, respectively. Viscosity, particle size distribution, and solid contents of the emulsions were measured with storage time. At the same time, by performing NMR and IR spectroscopy analysis of the solvent-extracted AKD from the emulsions, the qualitative and quantitative information about the deformation of the AKD itself were obtained. AKD was gradually hydrolyzed to become dialkylketone and higher storage temperature accelerated destabilization of the AKD emulsions.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.145-146
• /
• 2008

중국, 인도의 경제 발전 등의 요인으로 인해 고유가 시대가 계속될 것으로 전망되고 있으며, 기후 환경 문제로 인해 신재생 에너지 사업이 큰 부가가치를 지닌 사업으로 부각할 것이다. 이에 분산전원에 대한 관심도는 커지고 있으나, 분산전원이 계통에 연계되기 위해서는 해결해야 할 문제가 너무 많다. 이를 해결할 수 있는 방안으로 마이크로 그리드에 대한 관심이 지속되고 있으며 많은 연구가 진행되고 있다. 본 논문에서는 기존의 배전계통 계획 기법에 대해 분석하고, 마이크로그리드가 도입되기 위해서 배전계통 계획 시 고려해야 할 점에 대해 논하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.5
• /
• pp.573-580
• /
• 2014

The electrical reliability of the power generation and distribution system of Floating Liquefied Natural Gas vessels has been analyzed according to the operating modes using Electrical Transient Analysis Program in this paper. Electricity is used for the topside processes, cargo pumps for off-loading, thrusters for heading control and marine equipment. It is very important to improve the safety, efficiency, and stability of the electrical power system for successful operation. The voltage variation of the high and the low voltage bus shall be within the primitive limitation range at normal operation loads both in steady state and in the transient state. The power system was simulated and compared with class rule for design verification.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.943-945
• /
• 2000

In this paper described that study on the distribution and characteristics of axial magnetic field by mathematical analysis and experiment for axial magnetic field type vacuum interrupter that important part on vacuum circuit breaker. And, it was shown that inspected results of arc shape at breaking the current by typical axial magnetic field type model and new axial magnetic field type model.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.1006-1010
• /
• 1995

This paper describes Sexual Reproduction Genetic Algorithm(SRGA) for function optimization. In SRGA, each individual utilize a diploid chromosome structure. Sex cells(gametes) are produced through artificial meiosis in which crossover and mutation occur. The proposed method has two selection operators, one, individual selection which selects the individual to fertilize, and the other, gamete selection which makes zygote for offspring production. We consider the effects of multi-selection and diploidy on search performance. SRGA improves local and global search(exploitation and exploration) and show optimum tracking performance in nonstationary environments. Gray coding is incorporated to transforming the search space and Genic uniform distribution method is proposed to alleviate the problem of premature convergence.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.338-344
• /
• 1996

This study was an investigation of plasma-induced damages on silicon substrate in the semiconductor manufacturing technology. The plasma-induced damage level on silicon substrate was analyzed and compared in various plasma etching systems. The analysis methods were therma wave, life-time recovery, SCA (Surface Charge Analyzer) and TRXF (Total Reflection X-ray Fluorescence) measurements, and the measured values were compared for each systems. In the comparison of the values which were obtained by a system that had low life-time recovery, there was not any differences in DC parameters. However, the reflesh time distribution of device of that system had decreased about 10 to 20m sec compared to a system which had high life-time recovery.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1053-1055
• /
• 2005

At the moment, the operation methods for pad switch are different due to the differences of the manufacturer and the types or ratings of pad switches; accordingly, various types of the operation tools are required for the operation of pad switch. Sometimes, the operator uses conductive tool made of metal, or there is no sufficient space around the pad switch for operation and these kinds of problems are related with the potential safety accidents of the operators. Therefore, to solve these problems, new universal operation tool for pad switch, which only needs the change of operation head for various types of pad switches, has been developed. With this new tool, durability and safety of the operator can be achieve.