• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1663-1670
• /
• 2012

The inhibitory effects of rose hip (Rosa canina L.) water extracts from two different manufactures on osteoarthritis was comparatively investigated in primary cultures of rat cartilage cells. To identify the effects of rose hip extracts against $H_2O_2$ (300 ${\mu}M$, 2 hr) treatment, cell survival was measured by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cell survival increased by rose hip extracts in the range of 100 to 600 ${\mu}g/mL$ of $H_2O_2$ treatment. To determine the anti-inflammatory effects of rose hip extracts, tumor necrosis factor alpha (TNF-${\alpha}$), nitric oxide (NO), and Cox-2 expression were measured after lipopolysaccharide (LPS) activation. TNF-${\alpha}$ level with rose hip extract treatment was decreased by 27.4% and 31.9% at 600 ${\mu}g/mL$ of $H_2O_2$ treatment. Nitric oxide was inhibited by rose hip extract at 100~600 ${\mu}g/mL$ of $H_2O_2$ treatment in a dose-dependent manner. In addition, Cox-2 protein expression was dose-dependently decreased while Cox-1 had no change in expression level. The severity of osteoarthritis is controlled by a balance between anabolic and catobolic factors in an articulation, therefore the expression of these factors plays a critical role in preventing osteoarthritis. In measuring anabolic factors, the genetic expression of collagen type I increased with rose hip treatment, while the genetic expression of collagen II did not change. In addition, the genetic expression of aggrecan (proteoglycan core protein) was significantly increased. while the genetic expression of matrix metalloproteinase (MMP) 3, 7 and 13, known catabolic factors, was significantly inhibited by treatment with rose hip extract. The expression of MMP13 was especially highly influenced. In conclusion, rose hip water extracts show inhibitory effects on cell death by $H_2O_2$ mediated oxidative stress, which is related to inhibitory effects on inflammation due to TNF-${\alpha}$, NO, and Cox-2. The ability of rose hip extracts to ameliorate inflammation in primary cultures of cartilage cells seems to associate with an increased genetic expression of specific anabolic factors, collagen type I and aggrecan, and a decreased expression of catabolic factors, MMPs (3, 7, and 13). However, there were no significant differences between rose hip extracts from the two manufacturers.

• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.463-471
• /
• 2016

A shear strength model for the high-shear ring anchor consisting of a steel ring and a rod was developed based on the shear tests on single high-shear ring anchors. The shear strength was found to be proportional to $f_{ck}{^{0.75}}$ which is a similar characteristic to the strength of shear connectors used in composite structures. The effects of the compressive strength of concrete, edge distance, and embedment length of rod are included in the proposed model. Comparison with 22 tests shows that the average and the coefficient of variation of test-to-prediction ratios are 1.01 and 7.57%, respectively. Push tests on the specimens having four high-shear ring anchors at each face were conducted and the measured shear strengths were compared with the predictions by the proposed model. For the specimen with an edge distance of 100 mm, a splitting failure occurred and for the specimens with an edge distance of 150 mm, a failure mode mixed with splitting and bearing occurred, which were very similar to the failures of shear tests on single high-shear ring anchors. In case of a splitting failure, the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 400 mm which is four times of the edge distance. In case of a bearing failure, the failure area is less than 150 mm from the center of the anchor and therefore the overlap of failure surfaces could be prevented by providing the longitudinal spacing of 200 mm. The average of the test-to-prediction ratios of Push tests is 98%, which means that the proposed mode can be applied to predict the shear strength of the multiple high-shear rings.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.2
• /
• pp.201-219
• /
• 2014

The Republic of Korea in the real economy to a knowledge economy, and a center of creativity and imagination in the creative economy is changing the paradigm. As the core of creating economic, creative industries with the technology and information play an important role in the industry individuals. In order to solve the problem of the polarization of the economy and high youth unemployment rate of Korea, to recognize the role of the creative industries, as objection part, dimensions pan-national and one creative companies in industries of Mobile Apps various policies that support has been promoted. Support these policies to be able to contribute to the establishment of the success of mobile apps one-person creating company, we performed this study targeting one-person company that creates mobile apps area, we conducted a demonstration study of success factors, and thus more effective and efficient in an attempt to seek out support measures. In this study, we derive a research 4 hypothesis about the success factors of one creative enterprise through literature discussion, a study was made on the basis of empirical data of one-person company that creates mobile apps. The results of the analysis, first, if the development rate of the mobile application technology is fast and a new competition associated product is appeared, it was possible to find a tendency to be higher at the performance quantitative companies. Second, if the founder is a founding for the benefit and rewarding work and come to terms with the risk, it was possible to discover tends to be higher achievement quantitative. Third, if one-person company select a target market with capture intensively, it was possible to find a tendency for higher qualitative results. Fourth, it could be found that the reliability of the contact frequency of the network related performance business environment these characteristics enterprise management strategy and act as a significant modulatory effect. Provision of information relating to management and entrepreneurship education to be one creative enterprise is required, these results suggest that there is a provision continuing need for the opportunity to be able to meet and network and reliable variety have. In this study, to take advantage to promote the elimination measures that can increase the likelihood of success of the company of institutions to support one company that creates knowledge-based, such as in the field of mobile application.

• Journal of Life Science
• /
• v.20 no.8
• /
• pp.1235-1240
• /
• 2010

Natural compounds have been studied to substitute synthetic antioxidants. In this study, the anti-oxidant activity of 70% acetone extracts from the Vaccinium oldhami fruit was investigated for utilization as ingredients for the cosmetic and bio-industries. Anti-oxidant activity was determined by determining total polyphenolic content, electron donating ability, nitric oxide (NO) radical scavenging activity, $ABTS{\cdot}^+$ cation radical scavenging activity and hydrogen peroxide scavenging activity. The polyphenolic content of 70% acetone extracts of the Vaccinium oldhami fruit was 55.972 mg TAE/g. In electron donating activity, 70% acetone extracts of the Vaccinium oldhami fruit showed an effect of 93.9%, which was similar to BHA effect at a concentration of 500 ${\mu}g/ml$. In the NO radical scavenging ability, 70% acetone extracts of the Vaccinium oldhami fruit showed 60% at 500 ${\mu}g/ml$. $ABTS{\cdot}^+$ cation radical scavenging activity of the Vaccinium oldhami fruit at a concentration of 1000 ${\mu}g/ml$ was 75.7%. Also, hydrogen peroxide scavenging activity of 70% acetone extracts showed 80.8% at 100 ${\mu}g/ml$, whichwas higher than BHA. In the natural compound market, the most important factors are the ability to obtain high effects of a material in low concentrations and a long-lasting supply. The Vaccinium oldhami fruit can be harvested every year - this fulfills one of the requirements. From these results, we can confirm that the Vaccinium oldhami fruit has anti-oxidant abilities and has potential as a natural anti-oxidant agent to be utilized in the cosmeceutical and bio-industries.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.113-145
• /
• 2009

Recently, due to the globalization of the IT(Information Technology) market, devices and systems designed in one country are used in other countries as well. This phenomenon is becoming the key factor for increased interest on cross-cultural, or cross-national, research within the IT area. However, as the IT market is becoming bigger and more globalized, a great number of IT practitioners are having difficulty in designing and developing devices or systems which can provide optimal experience. This is because not only tangible factors such as language and a country's economic or industrial power affect the user experience of a certain device or system but also invisible and intangible factors as well. Among such invisible and intangible factors, the cultural characteristics of users from different countries may affect the user experience of certain devices or systems because cultural characteristics affect how they understand and interpret the devices or systems. In other words, when users evaluate the quality of overall user experience, the cultural characteristics of each user act as a perceptual lens that leads the user to focus on a certain elements of experience. Therefore, there is a need within the IT field to consider cultural characteristics when designing or developing certain devices or systems and plan a strategy for localization. In such an environment, existing IS studies identify the culture with the country, emphasize the importance of culture in a national level perspective, and hypothesize that users within the same country have same cultural characteristics. Under such assumptions, these studies focus on the moderating effects of cultural characteristics on a national level within a certain theoretical framework. This has already been suggested by cross-cultural studies conducted by scholars such as Hofstede(1980) in providing numerical research results and measurement items for cultural characteristics and using such results or items as they increase the efficiency of studies. However, such national level culture has its limitations in forecasting and explaining individual-level behaviors such as voluntary device or system usage. This is because individual cultural characteristics are the outcome of not only the national culture but also the culture of a race, company, local area, family, and other groups that are formulated through interaction within the group. Therefore, national or nationally dominant cultural characteristics may have its limitations in forecasting and explaining the cultural characteristics of an individual. Moreover, past studies in psychology suggest a possibility that there exist different cultural characteristics within a single individual depending on the subject being measured or its context. For example, in relation to individual vs. collective characteristics, which is one of the major cultural characteristics, an individual may show collectivistic characteristics when he or she is with family or friends but show individualistic characteristics in his or her workplace. Therefore, this study acknowledged such limitations of past studies and conducted a research within the framework of 'theoretically integrated model of user satisfaction and emotional attachment', which was developed through a former study, on how the effects of different experience elements on emotional attachment or user satisfaction are differentiated depending on the individual cultural characteristics related to a system or device usage. In order to do this, this study hypothesized the moderating effects of four cultural dimensions (uncertainty avoidance, individualism vs, collectivism, masculinity vs. femininity, and power distance) as suggested by Hofstede(1980) within the theoretically integrated model of emotional attachment and user satisfaction. Statistical tests were then implemented on these moderating effects through conducting surveys with users of four digital devices (mobile phone, MP3 player, LCD TV, and refrigerator) in three countries (US, Germany, and Russia). In order to explain and forecast the behavior of personal device or system users, individual cultural characteristics must be measured, and depending on the target device or system, measurements must be measured independently. Through this suggestion, this study hopes to provide new and useful perspectives for future IS research.

• Pediatric Infection and Vaccine
• /
• v.7 no.1
• /
• pp.129-135
• /
• 2000

Purpose : We previously reported the short-term immunogenecity and safety of 47 passaged Oka strain live attenuated varicella vaccine in healthy children in 1997. Now, we conducted this two-year follow-up study to confirm the maintenance of immunity, the occurrence of natural varicella infection and the activation of vaccine induced latent infection on the same vaccine. Methods : 99 children who had been immunized by 47 passaged Oka strain live attenuated varicella vaccine in 1997 were followed up by questionnaire, and 46 children out of study group were followed up serologically. They were asked to report any instance of varicella or herpes zoster since they had been immunized. If there was any evidence of varicella or herpes zoster, they should be clinically or serologically confirmed by doctor. Also, those patients' parents were asked to report any instance of varicella or herpes zoster in their family, playmate, kindergarten, school, or other settings. The immunity to VZV was confirmed by EIA and FAMA test. Results : 6 recipients developed breakthrough varicella after exposure to VZV in family, kindergarten and school during follow-up period. However, clinical features of those patients were very mild and self limited without therapy. And none of the recipients developed herpes zoster during this observation period. The results of EIA test showed that study subjects were all seropositive except one, and the antibody titers and GMT of FAMA test were seropositively maintained in all subjects. Statistically, the antibody titers of EIA and FAMA test confirmed two years after vaccination were higher than those results confirmed one month after vaccination. Conclusion : Our study results suggest that the immunity of 47 passaged Oka strain live attenuated varicella is well maintained until 2 years later after vaccination, and mild natural infection after exposure to VZV can be occurred with low rate. There were not developing zoster in study vaccine after vaccination for two-years.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.144-153
• /
• 2006

The effects on deacidification of citrus fruits produced at early harvesting season for juice products were examined by heating treatment of raw fruits and electrodialysis of juice. Weight and total acidities were decreased by heating treatment for 40 hr at $25^{\circ}C,\;30^{\circ}C,\;35^{\circ}C\;and\;40^{\circ}C$, but $^{\circ}Brix$ and pH increased Sugar to acid ratio also increased. Total acidities were decreased from 1.25 (Oct30, 2004), 1.24 (Nov.5, 2004), 0.99 (Nov.13, 2004) and 0.98% (Nov.19, 2004) to 0.48 (Oct30, 2004), 0.51 (Nov.05, 2004), 0.37 (Nov.13, 2004) and 0.42% (Nov.19, 2004) by electrodialysis for 100 min respectively, and $^{\circ}Brix$ also slightly decreased, but solid to acid ratio was increased as a result. However pH and color remained almost unchanged by electodialysis. Also, free sugar contents of citrus juice little were changed, but organic acid content were decreased fairly. Narirutin and hesperidin content among flavonoids were slightly decreased by electrodialysis, but they were not significantly different. $K^+,\;PO_4^{2-},\;SO_4^{2-}\;and\;Cl^-$ content were decreased by electrodialysis, and $K^+$ contents decreased by more than 80% However, $Na^+$ consent was increased by about 2 times. Total polyphenol contents and electron donating abilities were decreased a little by electrodialysis but nitrite scavenging abilities were little changed. By acceptability test citrus juice prepared by electrodialysis for 100 min was superior to original citrus juice.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.349-354
• /
• 2011

Our objective in this study is to assess the safety of docosahexaenoic acid (DHA) fortified milk of dairy cows fed feeds containing protected fish oil treated with formaldehyde by analyzing formaldehyde concentration in commercial milk and DHA fortified milk of dairy cows fed formaldehyde treated feed. There are 3 milk samples in this study: Commercial milk (CM), DHA fortified milk for Kid (DHA-K) and DHA fortified milk for Baby (DHA-B). We confirm the fresh quality of these three samples by physicochemical tests. In fat content result, three groups are significantly different at the p < 0.05 by Duncan's multiple range test, but fat content of group DHA-K is about half the level of the other two groups. Protein content of group DHA-K is 1 % higher than other two groups. According to the analysis result of DHA content of DHA fortified milk, DHA content of DHA-B is two-fold higher than DHA-K. Similar pattern was seen in the intake based on age. According to HPLC analysis result of formaldehyde concentration in milk, commercial milk and DHA fortified milk are between 0.013 ppm and 0.057 ppm which is formaldehyde standard level in fresh milk settled in WHO (World Health Organization). Three groups have no significantly differences at the p < 0.05 by Duncan's multiple range test. For this reason, it can be concluded that there is no transition of formaldehyde from dairy cows fed formaldehyde treated feeds to its produced milk. Safety about formaldehyde of DHA fortified milk of dairy cows fed formaldehyde treated feeds is considered similar to commercial milk.