• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.3-10
• /
• 1999

The unknown amount of thiolane retained on different soil matrix was characterized by employing an uniquely designed glass vessel, which was forced to purge the prepared slurry sample so that thiolane may diffuse into Tenax/charcoal tube. Thiolane can be recovered ranging from approximately 89 % at 1 ppm regardless of soil types, which was not consequently affected by potential biodegradation during sample preparation. For 5 ppm. thiolane is more recoverable up to 92 % for sand, whereas it was poorly recovered as low as 85 % for clay. It strongly suggests that controls should be considered when soil types varied in a concerned area. The technique was eventually capable of determination of thiolane for the samples taken from the site which led to be taken into consideration for proper site remediation.

• Structural Engineering and Mechanics
• /
• v.13 no.5
• /
• pp.491-504
• /
• 2002

Recently we formulated a 2D hybrid stress element from the 3D Hellinger-Reissner principle for the analysis of thick bodies that are symmetric to the thickness direction. Polynomials have typically been used for all the displacement and stress fields. Although the element predicted the dominant stress and all displacement fields accurately, its prediction of the out-of-plane shear stresses was affected by the very high order terms used in the polynomials. This paper describes an improved formulation of the 2D element using Fourier series expansion for the out-of-plane displacement and stress fields. Numerical results illustrate that its predictions have markedly improved.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.41-41
• /
• 2004

At the University of Queensland (UQ), research into the performance of high-speed (in excess of 7000km/hr) air-breathing engines in the form of supersonic combustion ramjets (or scramjets) has been made for almost 20 years. This has been possible because the T3 and T4 shock tunnels, located at the ANU and UQ, respectively can simulate these conditions. However, like all facilities, there are differences between the flow generated in these facilities and that, which occurs in flight. The correlation between the two has not been determined for these facilities, or indeed for any shock tunnel performing supersonic combustion experiments. The aim of the HyShot flight program is to obtain this correlation by undertaking a sounding rocket program based at Woomera in South Australia. The seminar will discuss new approach taken by the UQ researches in developing this cost effective flight program, as well as the triumphs and disappointments which have been encountered so far in completing this somewhat ambitious program.

• Structural Engineering and Mechanics
• /
• v.17 no.1
• /
• pp.87-97
• /
• 2004

In gradient-dependent plasticity theory, the yield strength depends on the Laplacian of an equivalent plastic strain measure (hardening parameter), and the consistency condition results in a differential equation with respect to the plastic multiplier. The plastic multiplier is then discretized in addition to the usual discretization of the displacements, and the consistency condition is solved simultaneously with the equilibrium equations. The disadvantage is that the plastic multiplier requires a Hermitian interpolation that has four degrees of freedom at each node. Instead of using a Hermitian interpolation, in this article, a 3-node incompatible (trigonometric) interpolation is proposed for the plastic multiplier. This incompatible interpolation uses only the function values of each node, but it is continuous across element boundaries and its second-order derivatives exist within the elements. It greatly reduces the degrees of freedom for a problem, and is shown through a numerical example on localization to yield good results.

• Structural Engineering and Mechanics
• /
• v.3 no.2
• /
• pp.185-192
• /
• 1995

A numerical algorithm for plane stress and shell elasto-plasticity is presented in this paper. The proposed strain decomposition (SD) algorithm is an elastic predictor/plastic corrector algorithm, and in the context of operator splitting, is a return mapping algorithm. However, it differs significantly from other return mapping algorithms in that only the necessary response functions are used without invoking their gradients, and the stress increment is updated only at the end of the time step. This makes the proposed SD algorithm more suitable for materials with complex yield surfaces and will guard against error accumulation during the time step. Comparative analyses of structural systems using the proposed strain decomposition (SD) algorithm and the iterative radial return (IRR) algorithm are presented. The results demonstrate the accuracy and usefulness of the proposed algorithm.

• Industrial Engineering and Management Systems
• /
• v.11 no.1
• /
• pp.94-102
• /
• 2012

In this paper, an interactive planning and scheduling framework are proposed for optimising operations from pits to crushers in ore mining industry. Series of theoretical and practical operations research techniques are investigated to improve the overall efficiency of mining systems due to the facts that mining managers need to tackle optimisation problems within different horizons and with different levels of detail. Under this framework, mine design planning, mine production sequencing and mine transportation scheduling models are integrated and interacted within a whole optimisation system. The proposed integrated framework could be used by mining industry for reducing equipment costs, improving the production efficiency and maximising the net present value.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.254-256
• /
• 2003

A total of one hundred and twenty three goldbearing mineral deposits in the Charters Towers area west of Townswille, Queensland, Australia were initially classified into four named and unnamed separate vein styles, with different trends and alteration patterns, a breccia-style deposit and placer gold deposits. The area has vein deposits in Ordovician and Silurian granitoids and breccia-style in the Carboniferous volcanics. In this paper a modeling of these deposits is described using geological mapping, landscape analysis and digital imagery (Landsat TM and geophysics) to improve the classification and identification of possible new target for exploration.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.79-83
• /
• 1998

This study was conducted to delineate plume occurred in hazardous waste disposal site. At first, CPT (Cone Penetrometer Test) rig and HydroPunch were used to collect depth-discrete groundwater samples in concerned area. However, it was not capable of sampling the groundwater due to the cone refusal where the residual clay are layered at nominal depth through the aquifer. Alternatively, a number of temporary wells were installed after each of locations was penetrated using a modified steel cone functioned by CPT rig. The samples taken from those of wells were characterized by GCMS and GCFID, which revealed that sulfolane and thiolane were mainly presented. Subsequent analyses performed for the samples taken from permanent nest piezometers consistently demonstrated that possible plume boundary can be presented in the study area where contaminants were found as low as detection limit or levels of not-detectable.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.153-158
• /
• 2006

최근 임상용 LVAD의 계속된 발전으로 인해 환자들의 삶이 연장되었다. 그러나 LVAD가 환자의 삶을 연장하였지만, 우심실 심부전증을 야기 시켰고, 결론적으로 환자들은 RVAD가 필요하게 되었다. 이러한 이유로 장시간 사용할 수 있는 BVAD의 도입이 요구 되어졌다. 최근 BVAD에 관련된 연구들을 보면 장시간 사용을 위한 원심 BVAD의 디자인과 BVAD에서의 누수 정도를 파악하는데 목적을 두고 있다. 따라서 본 논문에서는 BVAD의 누수를 파악하기 위한 속도 데이터와 용적당 흐름 비율의 계산을 CFD를 사용하여 해석적으로 조사하고자 하였다. CFD의 해석 결과 틈새부위의 회전수가 증가 할수록 혈액의 흐름을 방해하는 역류가 증가하고 유량도 줄어들어, 틈새부위의 누수량이 회전속도의 변화에 의존된다는 것을 확인 할 수 있었다.

• International Journal of Reliability and Applications
• /
• v.5 no.2
• /
• pp.47-57
• /
• 2004

The market for used products is becoming more competitive and dealers of used products use warranty to promote sales as well as to provide assurance to customers. Offering warranty results in additional costs associated with warranty servicing. This cost can be reduced through actions such as overhaul and upgrade that improves the reliability of the item. This is worthwhile only if the cost of improvement is less than the reduction in the warranty servicing cost. This paper deals with two models to decide on the reliability improvement strategies for used items sold with FRW policy.