• YAKHAK HOEJI
• /
• v.24 no.3_4
• /
• pp.159-165
• /
• 1980

Tetrathiocyanatocobaltate[II] forms complexes with tertiary amine salts or quarternary ammonium salts which were extractable from aqueous solution by organic solvent. In order to study composition of the complex, the colored crystalline complexes produced were evaluated with elemental analysis, infrared and mass spectra. And also a novel spectrophotometric method for the determination of tertiary amine salt or quarternary ammonium salt with tetrathiocyanatocobaltate[II] was established by organic solvent extraction within coefficient of variation of 1.06-1.35%.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• Journal of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.351-354
• /
• 1975

Some quaternary ammonium salts were synthesized from 2-phenylethyl tosylate with pyridine and N,N-dimethyl p-toluidine, which were identified by NMR and IR spectrometry and the comparison of their physico-chemical constant has been made. It is found that the yield of the salts synthesized were significantly improved in acetonitrile rather than in acetone.

• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.112-116
• /
• 2015

Extraction of quaternary ammonium compounds (choline and betaine) from plant samples (spinach) using ion exchange resin (AG1, OH⁻ form) is a very simple and inexpensive approach. However, it is very hard to determine amounts of choline and betaine simultaneously using high-performance liquid chromatography-ultraviolet (HPLC-UV) detection. Unlike choline, betaine has low molar absorptivity in UV-visible (UV-Vis) region, which makes it difficult to carry out UV-Vis detection of betaine. The mixture of quaternary ammonium compounds (choline and betaine) was derivatized using 2-bromo acetophenone as a derivatizing agent. As a result, choline did not react with the derivatizing agent, whereas betaine formed a betaine derivative. This betaine derivative exhibited detectable UV absorption with baseline separation between choline and the betaine derivative. Thus, with this method, choline and betaine can be determined simultaneously by using the HPLCUV method through one-step derivatization, which is an easy, sensitive, and reliable method.

• Journal of Institute of Convergence Technology
• /
• v.5 no.2
• /
• pp.43-48
• /
• 2015

Deep eutectic solvents (DESs) are now broadly understood as a new kind of ionic liquid (IL) because they exhibit many characteristics and properties similar with ILs. The DESs made of quaternary ammonium salt blended with one of hydrogen bonding donor (HBD) compounds behave as ILs even at very low temperature. In this study, properties such as density, viscosity, surface tension, conductivity, and electrochemical behavior of DESs were reported and their applications were reviewed. Study on DESs has been drawn attention on application in metal finishing, but these solvents can be used in a variety of synthesis, and their potentials have been demonstrated in various areas. DESs are expected to offer applicability by extending the types of salts and hydrogen bond donor mixtures.

• Korean Journal of Pharmacognosy
• /
• v.19 no.4
• /
• pp.217-227
• /
• 1988

An alternative to the well known reversed-phase separations on chemically-boned phases has been developed. The approach is based on a dynamic modification of bare silica with long chain quaternary ammonium ions. The influence of the concentration and type of quaternary ammonium ion, the pH value and the ionic strength of the eluent on the selectivity towards test solutes has been investigated. The large number of parameters that can be attained. Once established, a high degree of reproducibility of the selectivity between solutes is obtained even when using different brands of silica; this is in contrast to the situation when using chemically-bonded phases, such as for example, different brands of octadecylsilyl-bonded silica materials. Examples of the use of system in pharmaceutical analysis and drug metabolism studies are given.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.603-607
• /
• 1998

Cellulose was reacted with ethylene oxide to get hydroxyethylcellulose. Quaternary ammonium salt was produced by reaction of epichlorohydrin and trialkylamine. The epoxide ring was opened by acid addition to 3-chloro-2-hydroxypropyltrialkylammonium chloride. Previously unreported two compounds, hydroxyethylcellulose-2-hydroxypropylammonium chloride ether and hydroxyethylcellulose-2-hydroxypropyltriethylammonium chloride ether were synthesized by substitution reaction of hydroxyethylcellulose with glycidyltrialkylammonium chloride or 3-chloro-2-hydroxypropyl-glycidyltrialkylammonium trialkylammonium chloride. All of the compounds including starting materials and reaction intermediates were characterized by $^1H$-NMR and FT-IR spectroscopy.

• YAKHAK HOEJI
• /
• v.18 no.3
• /
• pp.183-189
• /
• 1974

Distribution coefficients between nitrobanzene solution and deionized water, show a straight line when the number of alkyl radicals against the logarithm of distribution coefficient of the salts was plotted. After extracting salts of the indicator and the cationic surfactants with organic solvents, and employing the colorimetric method was used. A calculation method of distribution coefficients of the salts in the organic solvent has been suggested and it could be used for the extraction equilibrium of the primary amine, $CH_{3}(CH_2)_{n}NH_3^+$ secondary amine, $CH_{3}(CH_2)_{n}NH_{2}(CH_3)^+$, tertiary amine $CH_{3}(CH_2)_{n}NH(CH_3)_2^+$ and quaternary ammonium, $CH_{3}(CH_2)_{n}N(CH_3)_3^+$MO$^-$salts, (n=3,5,7,11).

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.829-834
• /
• 2010

Ligand variation was carried out on a cobalt(III) complex of Salen-type ligand comprised of 1,2-cyclohexenediamine and salicylaldehyde bearing a methyl substituent on 3-position and -[$CMe(CH_2CH_2CH_2N^+Bu_3)_2$] on 5-position, which is a highly active catalyst for $CO_2$/propylene oxide copolymerization. Replacement of the methyl substituent with bulky isopropyl group resulted in alteration of the binding mode, consequently lowering turnover frequency significantly. Replacement with an ethyl group preserved binding mode and activity. Replacement of the tributylammonium unit with trihexylammonium or trioctylammonium, or replacement of 1,2-cyclohexenediamino unit with -$NC(Me)_2CH_2N$- decreased activity, even though the binding mode was unaltered.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.144-148
• /
• 2009

Poly(1-oxo-2-phenyltrimethylene) was synthesized by palladium-catalyzed copolymerization of styrene and carbon monoxide in quaternary ammonium ionic liquids. The $[Pd(bipy)_2][PF_6]_2$ compound had relatively more catalytic activity than $[Pd(bipy)_2][BF_4]_2$ in ionic liquids. The catalytic activity of palladium (II) composite catalyst was superior to the catalyst formed in situ from palladium acetate, 2,2-bipyridyl, and $X^-$ ($X^-=PF_6^-$, $BF_4^-$) in ionic liquids. The effects of the volume of ionic liquids, reaction time and benzoquinone content on the copolymerization were also described.