This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.
본 연구에 사용한 시멘트는 보통 포틀랜드 시멘트이며, 공극 최소화를 위한 충전재는 미세석영을 사용하였고 고강도화에 따른 취성파괴 문제를 개선하기위해 강섬유를 사용하여 압축강도 300 MPa 이상의 초고강도 분체콘크리트를 개발 하고자 하였다. 콘크리트의 강도를 크게 향상시키기 위한 연구의 일환으로 계면영역의 부착강도를 향상시킬 수 있는 크기 0.6 mm 이하의 규사, 백운석, 보크사이트, 페로실리콘을 선정한 후 각각의 배합비, 양생조건을 달리하여 압축강도를 비교분석 하였다. 초고강도 분체콘크리트는 보통콘크리트와 달리 사용재료의 영향이 대단히 중요하다. 분체 콘크리트의 압축강도 측정 결과 페로실리콘 > 보크사이트 > 백운석 > 규사 순으로 골재의 강도가 압축강도에 큰 영향을 미치는 경향을 알 수 있었으며 페로실리콘의 경우 시멘트 중량 기준하여 혼입량 110%일 때 가장 큰 강도를 나타내었다. SEM 촬영 결과 C-S-H수화물이 비교적 많이 생성되었고, 고온고압양생으로 토버모라이트와 조놀라이트가 생성된 것을 확인 하였다. 또한 골재의 세립화, 분체의 치밀충전화 및 반응성 재료의 사용으로 인해 페이스트가 고강도화 되고, 강섬유를 사용하여 인성을 보강함으로써, 28일 압축강도 341 MPa의 초고강도 분체콘크리트를 성공적으로 개발 하였다.
Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.
2001년 황해 2차 탐사에서 채취된 89개 표층 퇴적물 시료에 대하여 고분해능 X선 회절분석기와 Siroquant v.3.0 프로그램을 이용하여 광물조성을 구하였다. 황해 표층 퇴적물은 주구성광물(석영 57.8%, 사장석 16.0%, 알카리 장석 10.0%), 점토광물 및 방해석 등으로 구성되어 있다. 점토광물 중에는 일라이트(8.7%)가 가장 많고, 녹니석(2.6%)이 두번째로 많으며, 카올리나이트(0.6%)는 매우 소량들어 있고, 스멕타이트는 존재하지 않는 것으로 밝혀졌다. 석영 함량은 황해의 가장자리에 많고, 산동 반도 남동쪽에서 제주도 남서쪽을 연결하는 북서-남동 방향을 따른 해역에서 매우 낮다. 이런 분포 경향은 조립질 퇴적물인 모래의 분포 경향과 일치한다. 이를 통하여 조립질 퇴적물은 많은 양의 석영으로 구성되어 있으며, 황해의 동쪽과 남서쪽으로 많은 양이 유입되었을 가능성이 크다고 추정할 수 있다. 일라이트의 분포는 석영과 반대되며, 세립질 퇴적물과 비슷한 경향을 나타낸다. 이것은 세립질 퇴적물의 상당한 양이 황해의 북서쪽으로부터 공급되었을 가능성을 보여준다. 이번 연구 결과만 가지고 황해 퇴적물의 근원지를 정확하게 규명하는 것은 힘들기 때문에, 이와 비슷한 일련의 연구가 계속되어야 할 것으로 판단된다.
To clarify influences of silicious raw materials on mineralogcal and petrological properties in clinkering process clay, shale, quartzite, sand and coal ash have been used as silicious raw materials. The tests on thermal properties, reactivity and burnability of raw mixtures which have different silicious raw materials respectively have been made by means of X-ray diffractometry, differential thermal analysis, optical microscopy and transmission electron microscopy. Limestone contains coarse crystalline grains which show 0.1-1.0mm and its decarbonation temperature is 86$0^{\circ}C$. Reaction temperatures among raw mixtures have been determined by X-ray diffractometry and their results are as follows; clay minerals under 1, 00$0^{\circ}C$, mica group, 100$0^{\circ}C$-110$0^{\circ}C$, feldspar group, 1, 10$0^{\circ}C$-1, 20$0^{\circ}C$ and quartz 1, 20$0^{\circ}C$-1, 30$0^{\circ}C$. Burnabilities of raw mixtures of different temperatures have been found that they mainly depend upon their mineral contents in silicious raw materials and their order is as follows; $clay\geq shale\gg quartzite \geq sand$.
Reactive Powder Concrete (RPC) is an ultra high strength and high ductility cement-based composite material and has shown some promise as a new generation concrete in construction field. It is characterized by a silica fume-cement mixture with very low water-binder (w/b) ratio and very dense microstructure, which is formed using various powders such as cement, silica fume and very fine quartz sand (0.15~0.4mm) instead of ordinary coarse aggregate. However, the unit weight of cement in RPC is as high as 900~1,000 kg/㎥ due to the use of very fine sand instead of coarse aggregate, and a large volume of relatively expensive silica fume as a high reactivity pozzolan is also used, which is not produced in Korea and thus must be imported. Since the density of RPC has a heavy weight at 2.5~3.0 g/㎤. In this study, the modified RPC was made by the combination of ternary pozzolanic materials such as blast furnace slag and fly ash, silica fume in order to economically and practically feasible for Korea's situation. The fire resistance and structural behavior of the modified RPC exposed to high temperature were investigated.
주문진사 및 석영사를 담체로 사용하여 코팅온도, 코팅시간, 및 초기 망간용액 주입농도를 변화시키면서 망간(IV)을 코팅시킨 모래흡착제($MnO_2$-Coated Sand, MCS)를 제조하였으며 As(III)의 산화효율을 비교하였다. MCS 제조의 최적조건은 코팅효율 및 As(III) 산화능으로 부터 선정하였다. 망간 코팅효율은 코팅시간에는 크게 영향을 받지 않았지만 코팅온도가 증가함에 따라 증가하였다. 반면 As(III)의 산화능은 코팅온도가 증가됨에 따라 크게 감소하여 나타났다. 이러한 결과들을 고려하여 MCS의 최적 코팅 조건을 $150^{\circ}C$ 온도조건과 1시간의 가열시간으로 선정할 수 있었다. Mn(II) 주입농도가 늘어남에 따라 망간 코팅효율은 뚜렷이 증가하였지만 As(III)의 산화능은 0.8 Mn(II) mol/kg sand 조건에서 최대값을 보여주었다. MCS로 부터의 망간의 용출은 pH가 감소함에 따라 크게 증가하여 나타났다. 최적 조건에서 제조한 MCS를 사용하여 As(III)의 산화반응 특성을 회분식 실험을 통하여 조사한 결과, MCS의 As(III) 산화특성은 MCS의 농도에 대하여 비례적인 반응속도를 보여주었으며 pH가 감소할수록 As(III)의 산화속도가 증가하였다.
본 연구에서는 제주특별자치도 강정항 인근 해역에서 채취한 해사의 기본특성을 분석하고, 실내 챔버시험으로부터 미고결 제주해사의 콘선단저항-상대밀도-연직구속압의 관계를 결정하였다. 또한 현장 표준관입시험, 콘관입시험, Suspension-PS 검층을 수행하여 제주인근 해역 퇴적층의 고결가능성을 평가하였다. 시험결과, 제주해사는 입자의 각진 정도가 크고 입자표면과 내부에 공극이 발달하여 최대, 최소간극비가 큰 탄산염 모래의 특성을 가지고 있었으며, 큰 압축성을 가진 규산염 모래와 유사한 콘선단저항 분포를 나타내었다. 그러나 미고결 제주해사의 $q_c-D_R-{\sigma}_v'$ 관계는 제주인근 해역 퇴적층의 상대밀도를 과대평가하였다. 관입시험(CPT, SPT) 결과와 Suspension-PS 시험에 의한 미소변형전단탄성계수를 비교한 결과, 제주인근 해역의 퇴적층은 고결 가능성이 매우 높은 것으로 확인되었다.
제주남방해역 표층퇴적물에 대해 입도분석, 경광물 및 점토광물, 그리고 미량원소 분석을 실시하였다. 본 연구해역의 퇴적물상은 남동부의 오조립질 분포역 과 남서부 조`세립질 분포지로 구분되며, 남서쪽 끝지역에는 소규모의 현생니질퇴적 물 분포대(mud zone)도 존재한다. 본 역에 분포하는 퇴적물은 분급이 불량하고 negative~positive skewed할뿐 아니라 platykurtic~leptokurtic한 특성을 나타냈으며, 조립질은 도약(saltation)에 의해, 세립질은 도약 및 부유(suspension)에 의해 운반된 것으로 보여 진다. 측정된 13종의 지화학적원소성분중 Co, Ni, Ca, Ag를 제외한 9 종은 남동부지역에서 남서부지역으로 향함에 따라 함량이 증가하는 경향을 보였고, Co와 Ni은 동`서부간에 유사한 함량분포를 나타냈으나 Ca와 Ag은 남동부지역에서 함량치가 높았다. 탄산염함량은 남동부의 조립질 분포역에서가 남서부보다 높게나 타난 반면 총 유기물함량은 이와는 상반된 경향을 보였다. 경광물은 석영, 암편, K- 장석, Na-Ca장석 순의 조성을 보였는데 제주도 주변 해역에서 외해쪽으로 향함에 따라 석영과 K-장석의 함량증가하고 Na-Ca장석과 암편은 감소하는 경향을 나타냈 다. 조사지역 남서쪽 끝 mud 지역의 점토광물로는 illite, chlorite, kaolinite, feldspar, calcite등인데, chlorite가 양적으로 많고 calcite peak가 현저하게 나타날 뿐만 아니라 Ca, Pb, Ni등의 지화학적원소성분의 함량도 황하기원퇴적물의 특성치 와 유사하여 이 지역세립질퇴적물 대부분은 황하기원인 것으로 사료된다.
전북 익산지역의 한우사육에 사용한 황토를 gravel, sand, silt, coarse clay, fine clay으로 입도분리하여 각 분리된 시료에 대해서 광물성분 및 화학적 특성 등을 검토하였다 광물성분의 분석 결과, gravel과 sand에는 석영과 장석이 주로 포함되고, clay와 silt떼는 카오린광물 및 일라이트 등의 점토광물이 우세하며, 산화철광물은 fine clay에서 주로 포함된다. 주성분원소에서는 입경이 작은 시료일수록 Al, Fe, $H_2O$의 함량이 증가하여 점토광물의 함량 증가와 잘 일치하였다. 미량성분원소에서는 Zn, Rb, Sr, Ba, Pb등이 입도에 따라 큰 함량 차이를 보였다. Ba, Sr은 장석이 많은 sand에 다량 함유되어 주로 장석에 존재하는 것으로 나타났다 본래 황토 시료에 상당량 함유된 Pb 및 Sm은 입도분리된 시료에는 적은 함량을 나타내어, 입도 분리 과정에서 제거되기 쉬운 형태로 존재하는 것으로 보인다. Nb, La, Th, Ce 등은 silt 시료에 가장 많은 함량을 보였다. 이들 이외의 거의 모든 원소에서 점토광물의 함량이 많이 함유된 작은 입도시료에서 미량원소의 함량이 증가하는 경향 나타나 이들 대부분이 점토광물내에 주로 존재하는 것으로 보인다. 교환성양이온 함량과 산 및 알카리에 의한 용탈 원소 함량 등은 입자가 작은 점토시료에서 높게 나타났다. 따라서 가축사료 등 황토의 활용에 있어서 천연상태의 황토를 그대로 사용하는 것보다는 입도 분리에 의한 정제를 행한 미립의 점토분을 주로 사용하는 것이 황토의 이온교환성, 원소 용탈성, 흡착성, 흡수성 등의 특성을 향상시킬 수 있을 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.