• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.74-85
• /
• 2020

Darangnon in Gachon Village, Namhae-gun, Gyeongsangnam-do, is the first designated environment among Korea's industrial-based historical and cultural sites and is still the only one that involves agricultural activities. Although the stonework, which is the infrastructure environment here, has limitations that inevitably lead to natural and artificial deformation due to its nature, there has been no research to consider the situation so far. As of the end of May 2020, this study investigated and analyzed the damage in the sub-area of the survey, which is approximately 30% of the scope of the designation of the scenic spot, from a quantitative and qualitative perspective. As a result of the study, the state of loss, which reveals the physical damage of the arctic rice paddy stone retaining wall in the environment under investigation, was particularly serious around the coast, in the northern area with high slopes, and near tourist information centers and parking lots. On the other hand, the qualitative aspect of the damage to the stonework was noticeable in the repair of heterogeneous materials on the stone retaining wall adjacent to the village and parking lot, and the landscape damage caused by the cladding of plants was found in an environment far away from the residence. In addition, natural environmental factors such as slopes, elevations, and soil showed a close relationship with the degree of physical damage of the stone retaining wall, the higher the slope, the higher the elevation, and the better the soil drainage, the greater the impact. These results suggest that humanities environmental factors such as cultivation activities and management entities have important factors in the physical damage and management of stone retaining wall. Therefore, it is deemed essential to find management measures with local residents along with improving the agricultural environment, such as securing agricultural water and soil improvement, for the preservation of tuna paddies and stone retaining wall in the future.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.567-574
• /
• 2022

Coronary artery disease (CAD) and atrial fibrillation (AF) are known to share many risk factors. In particular, in the case of acute coronary syndrome, it may be difficult to clearly determine the diameter of the vessel due to complete occlusion of the vessel and thrombus. Thus, the relationship between the diameter of the coronary arteries was evaluated to be used as a reference data before the treatment of coronary arteries and drug selection in patients with AF. From January 2020 to August 2022, images of coronary angiography (CAG) with AF and normal sinus rhythm (NSR) on electrocardiography were target. In both subjects, images of normal coronary artery without lesions as a result of CAG were used. For all vessels, the diameters of the vessels were measured by dividing them into proximal, middle, and distal parts, and the measured diameters were divided by the average for evaluation. As a result of analyzing the left anterior descending artery diameter, the vessel diameter of the AF patient was 2.24±0.26 mm, which was smaller than that of the NSR patient, 2.86±0.38 mm, and was statistically significant. (p<0.001) As a result of analyzing the left circumflex artery diameter, the vessel diameter of the AF patient was 2.34±0.28 mm, which was smaller than the vessel diameter of the NSR patient, 2.87±0.29 mm, and was statistically significant. (p<0.001) As a result of analyzing the diameter of the right coronary artery, the vessel diameter of the AF patient was 2.68±0.5 mm, which was smaller than the vessel diameter of the NSR patient, 3.35±0.4 mm, and was statistically significant. (p<0.001) Considering that the coronary artery size of AF patients is significantly smaller than the coronary vessel size of NSR patients, it is considered as a useful study to be used as a reference for evaluating coronary artery diameter when the arrhythmia is AF. In particular, it is considered to be a study that can be helpful in diagnosing lesions, using drugs before and after surgery, and choosing to use auxiliary devices such as intravascular ultrasound.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.241-253
• /
• 2021

Manganese nodules have been found in the shallow water depth of the Arctic Ocean as well as in the abyssal plains of the Pacific and Indian Oceans, but detailed study for them were rarely investigated. Manganese nodules, collected from the East Siberian Sea through the Arctic Expedition using Araon ice braking vessel, have a high potential for Mn mineral resources because they have high Mn content with high Mn/Fe ratio. This study investigated the external form, size and weight, internal texture for the non-spherical manganese nodule, which has about 7 % of total nodule from the East Siberian Sea. This study also researched the relative Mn-oxide mineral composition using the peak area ratio of X-ray diffraction pattern and their chemical composition. All data obtained from non-spherical nodules were compared with the spherical ones. Ellipsoidal, platy and irregular types are common among 5 groups of non-spherical manganese nodule based on the external form, and major axis and weight have positive relationship. All non-spherical manganese nodules have core mainly composed of mud sediments. The average Mn oxide mineral contents in nodules are birnessite, buserite and todorokite in descending order. Although mineral composition does not show any correlation with the external form, kind of core or internal structure, todorokite and buserite contents tend to increase and birnessite content decrease from the surface to the core in the nodule. Non-spherical manganese nodules have higher Mn content and Mn/Fe ratio than those from the shallow water depth of the Arctic Sea and even in the deep-sea of the Pacific and Indian Ocean. Although non-spherical nodule is larger and heavier, and has lower Mn content and Mn/Fe ratio than spherical nodule, there are not any differences in mineral composition and internal structure between them. Almost all manganese nodules collected from the East Siberian Sea are attributed to diagenetic process, because they are higher than 5 in Mn/Fe ratio.

• Analyses & Alternatives
• /
• v.7 no.1
• /
• pp.115-145
• /
• 2023

The 20th National Congress of the Chinese Communist Party (hereafter referred to as "the 20th National Congress") was under the global spotlight long before it was held for seven days from 16 to 22 October 2022. People wondered whether Xi Jinping would secure a third term as China's leader or whether he would lay the foundations to be in power forever during the third term. In Korea, the press and media questioned whether the event would become the "crowning of Emperor Xi (Xi Huangdi)," whose power rivaled that of the first emperor in China, Shi Hunagdi, and featured the scene where Hu Jintao was forced to leave the venue during the Congress. On the other hand, many Korean academics focused more on how Xi would organize the Politburo and its Standing Committee and whether the outline of his heirs would appear during the event. This tendency in academia in turn worsened the media's concerns. This paper presents a quantitative analysis of the 20th National Congress Report, as opposed to an analysis of Xi's political intentions at the event. The National Congress Report outlines the Party's visions, goals, and strategies for the next five years in politics, economy, society, culture, foreign affairs, and relationship with Taiwan. The authoritative document is rich in narrative and logic and deserves academic study. This research analyzes the 18th, 19th, and 20th Reports by identifying their keywords and regular expressions and checking their frequency and percentage through text-mining methods. This approach enables the quantification and visualization of the significant changes in the Party's sovereign vision over the fifteen years of Xi's rule from 2013 to 2027.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.1
• /
• pp.42-55
• /
• 2023

A methodology to predict the carbon performance of newly created urban greening plans is required as policies based on quantifying carbon performance are rapidly being introduced in the face of the climate crisis caused by global warming. This study developed a tree carbon calculator that can be used for carbon reduction designs in landscaping and attempted to verify its effectiveness in landscape design. For practical operability, MS Excel was selected as a format, and carbon absorption and storage by tree type and size were extracted from 93 representative species to reflect plant design characteristics. The database, including tree unit prices, was established to reflect cost limitations. A plantation experimental design to verify the performance of the tree carbon calculator was conducted by simulating the design of parks in the central region for four landscape design, and the causal relationship was analyzed by conducting semi-structured interviews before and after. As a result, carbon absorption and carbon storage in the design using the tree carbon calculator were about 17-82% and about 14-85% higher, respectively, compared to not using it. It was confirmed that the reason for the increase in carbon performance efficiency was that additional planting was actively carried out within a given budget, along with the replacement of excellent carbon performance species. Pre-interviews revealed that designers distrusted data and the burdens caused by new programs before using the arboreal carbon calculator but tended to change positively because of its usefulness and ease of use. In order to implement carbon reduction design in the landscaping field, it is necessary to develop it into a carbon calculator for trees and landscaping performance. This study is expected to present a useful direction for ntroducing carbon reduction designs based on quantitative data in landscape design.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.363-373
• /
• 2022

On April 29, 2021 (1st), June 2 (2nd), and August 17 (3rd), we surveyed benthic macroinvertebrates fauna at Muljangori-oreum wetland in Bonggae-dong, Jeju Island, Korea. Muljangori-oreum wetland was divided into four areas. The survey was conducted in three accessible areas (areas 1-3). As a result of habitat environment analysis, the average monthly temperature from 2017 to 2021 was the highest in July and August and the lowest in December and February. This pattern was repeated. As a result of analyzing changes in vegetation and water surface area through satellite images, normalized difference vegetation index (NDVI) increased from February to July and decreased after July. Normalized difference water index (NDWI) was analyzed to show an inverse relationship. A total of 21 species from 13 families were identified in the qualitative survey and a total of 412 individuals of 24 species from 15 families were identified in the quantitative survey. A total of 26 species from 17 families, 8 orders, 3 classes, and 2 phyla of benthic macroinvertebrates were identified. The dominant species was Chronomidae spp. with 132 individuals (32.04%). Noterus japonicus was a subdominant species with 71 individuals (17.23%). As a result of comparative analysis of species identified in this study and the literature, it was confirmed that species diversity was high for Coleoptera and Odonata. Main functional feeding groups (FFGs) were found to be predators. Habitat orientation groups (HOGs) were found to be swimmers. In OHC (Odonata, Hemiptera, and Coleoptera) group, 17 species (73.91%) in 2021, 23 species (79.31%) in 2016, 26 species (86.67%) in 2018, and 19 species (79.17%) in 2019 were identified. Cybister japonicus, an endangered species II, was confirmed to inhabit Muljangori-oreum wetland in the literature. Ten individuals (2.43%) were also confirmed to inhabit Muljangori-oreum wetland in 2021. Therefore, continuous management and habitat protection are required to maintain the habitat environment of C. japonicus in Muljangori-oreum wetland.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.119-133
• /
• 2024

As a result of significant investments by the government in promoting public technology commercialization and fostering a venture startup ecosystem, there have been quantitative achievements, such as the registration of over 1,600 Innopolis Start-ups since 2006, generating a total revenue of 1.1 trillion won as of 2021. However, these achievements have been overshadowed by critical qualitative challenges, including a continuous decline in average revenue per Innopolis Start-up. This led to a focus on whether managers' technological and market orientations affect business performance. This study aims to provide insights into improving the qualitative growth of Innopolis Start-ups by analyzing the effects of technological and market orientations on business performance, as well as the moderating effects of adjusting marketing and research and development (R&D) costs on this relationship. Through prior research and empirical analysis, this study derives three main findings. First, technological excellence and innovation significantly influence the business performance of Innopolis Start-ups, while technological intensity does not. Second, customer orientation and competitive orientation significantly impact business performance, whereas entry barriers as a single factor do not. Third, adjusting marketing and R&D costs, as controlled variables obtained through general situations, has no direct impact on other variables. However, it interacts with entry barriers, influencing financial business performance, with R&D costs exhibiting a negative buffering effect and marketing costs showing a positive enhancing effect. This study confirms that both technological and market orientations directly influence the business performance of Innopolis Start-ups, thus being crucial factors affecting their growth. Moreover, it establishes that investments in marketing and R&D play significant roles in alleviating initial entry barriers and enhancing financial performance. Consequently, it underscores the importance of reinforcing technological and market orientations tailored to the characteristics of Innopolis Start-ups. Additionally, it proposes five theoretical contributions: strengthening institutional support systems for technology commercialization and innovation, improving qualitative evaluation criteria during the selection process of Innopolis Start-ups, conducting comprehensive analyses of technological and market aspects during startup selection, enhancing support for marketing education and consulting for smooth market entry, and supporting expenditure strategies and milestone setting tailored to the industrial characteristics of individual Innopolis Start-ups.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.67-88
• /
• 2018

Until recently, as we recognize the significance of sustainable growth and competitiveness of small-and-medium sized enterprises (SMEs), governmental support for tangible resources such as R&D, manpower, funds, etc. has been mainly provided. However, it is also true that the inefficiency of support systems such as underestimated or redundant support has been raised because there exist conflicting policies in terms of appropriateness, effectiveness and efficiency of business support. From the perspective of the government or a company, we believe that due to limited resources of SMEs technology development and capacity enhancement through collaboration with external sources is the basis for creating competitive advantage for companies, and also emphasize value creation activities for it. This is why value chain network analysis is necessary in order to analyze inter-company deal relationships from a series of value chains and visualize results through establishing knowledge ecosystems at the corporate level. There exist Technology Opportunity Discovery (TOD) system that provides information on relevant products or technology status of companies with patents through retrievals over patent, product, or company name, CRETOP and KISLINE which both allow to view company (financial) information and credit information, but there exists no online system that provides a list of similar (competitive) companies based on the analysis of value chain network or information on potential clients or demanders that can have business deals in future. Therefore, we focus on the "Value Chain Network System (VCNS)", a support partner for planning the corporate business strategy developed and managed by KISTI, and investigate the types of embedded network-based analysis modules, databases (D/Bs) to support them, and how to utilize the system efficiently. Further we explore the function of network visualization in intelligent value chain analysis system which becomes the core information to understand industrial structure ystem and to develop a company's new product development. In order for a company to have the competitive superiority over other companies, it is necessary to identify who are the competitors with patents or products currently being produced, and searching for similar companies or competitors by each type of industry is the key to securing competitiveness in the commercialization of the target company. In addition, transaction information, which becomes business activity between companies, plays an important role in providing information regarding potential customers when both parties enter similar fields together. Identifying a competitor at the enterprise or industry level by using a network map based on such inter-company sales information can be implemented as a core module of value chain analysis. The Value Chain Network System (VCNS) combines the concepts of value chain and industrial structure analysis with corporate information simply collected to date, so that it can grasp not only the market competition situation of individual companies but also the value chain relationship of a specific industry. Especially, it can be useful as an information analysis tool at the corporate level such as identification of industry structure, identification of competitor trends, analysis of competitors, locating suppliers (sellers) and demanders (buyers), industry trends by item, finding promising items, finding new entrants, finding core companies and items by value chain, and recognizing the patents with corresponding companies, etc. In addition, based on the objectivity and reliability of the analysis results from transaction deals information and financial data, it is expected that value chain network system will be utilized for various purposes such as information support for business evaluation, R&D decision support and mid-term or short-term demand forecasting, in particular to more than 15,000 member companies in Korea, employees in R&D service sectors government-funded research institutes and public organizations. In order to strengthen business competitiveness of companies, technology, patent and market information have been provided so far mainly by government agencies and private research-and-development service companies. This service has been presented in frames of patent analysis (mainly for rating, quantitative analysis) or market analysis (for market prediction and demand forecasting based on market reports). However, there was a limitation to solving the lack of information, which is one of the difficulties that firms in Korea often face in the stage of commercialization. In particular, it is much more difficult to obtain information about competitors and potential candidates. In this study, the real-time value chain analysis and visualization service module based on the proposed network map and the data in hands is compared with the expected market share, estimated sales volume, contact information (which implies potential suppliers for raw material / parts, and potential demanders for complete products / modules). In future research, we intend to carry out the in-depth research for further investigating the indices of competitive factors through participation of research subjects and newly developing competitive indices for competitors or substitute items, and to additively promoting with data mining techniques and algorithms for improving the performance of VCNS.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.1-31
• /
• 1981

Rootability of the hardwood cuttings of mulberry was related not only histological characteristics but dependent on biochemical properties. In this connection, the characteristics of the hardwood cuttings were histologically observed and the growth substances produced by the cuttings were also identified by means of mung bean bioassay. Amino acid, carbohydrate, nucleic acid contents, and the C/N ratio were also analysed. The results are summarized as follows. 1. There were differences in rootability of cuttings between mulberry species and varieties Among the three mulberry species tested, Morus Lhou Koidz. showed the highest rootability while M. bombycis showed the lowest one. In varietal differences in rootability, it was shown that the varieties could be grouped according to rootability: high varieties(above 80%), medium(41~79%), and low(below 40%). The higher varieties were Kemmochi, Nakamaki, Kosen, and Wusuba roso. 2. The histological characteristic of the hardwood cuttings most closely related to rootability was cell layer arrangement in the sclerenchyma tissue. The lower rootability varieties developed two or three overlapping cell layers in the bark tissue and in the higher rootability varieties they were scattered over the primary cortex. 3. In the higher rootability varieties, there was a positive correlation between the development of root primodia and rootability of the hardwood cuttings. It was also shown that there was a close relationship between the size of primodia and the surface area of the lenticel with rootability of the cuttings. 4. Effect of growth substances extracted from the hardwood cuttings were determined by mung bean bioassay. The higher rootability varieties usually showed higher activities of the growth substances, in contrast the lower rootability varieties showed higher activities of the inhibitory substances. 5. It was evident that the substance separated by paper chromatography was identified as indole acetic acid with $R_f$ value ranging from 0.3 to 0.5. The other substances detected at a $R_f$ value ranging from 0.8 to 1.0 and origin to 0.1 were also responsible for rooting. 6. There exists a quantitatively different distribution of growth substances in a synergistic system in the tissues of cuttings, and the balance between growth and inhibitory substances gives rise to the development of rooting. Particularly, no descent of the substances from winter buds resulted in no rooting of cuttings but these substances were produced a week after planting in a warm environment. 7. It was shown that there were positive correlations between carbohydrate ($r=0.72^*$) and total sugar ($r=0.67^*$) and rootability, respectively, but there were negative correlations between reducing sugars ($r=-0.75^*$) and rootability. 8. High C/N ratio gave rise to high rootability($r=0.67^*$). The latter therefore depended on high amount of carbohydrate rather than nitrogen in the cuttings. 9. The content of RNA and DNA in the cuttings was not changed for upto two weeks after the cuttings were planted. Then an increase in RNA content took place in only the high rootability varieties. 10. There were quantitative and qualitative differences in the compositions of the amino acids between the high rootability varieties and the low rootability varieties. More aspartic acid and cystine were found in the higher rootability varieties than in the low rootability varieties.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.391-407
• /
• 2003

This study was conducted to investigate the factors affecting the born density of food and nutrition major and non-major university students in Seoul area. Data for food habits, dietary and health-related behavior were obtained by self administered questionnaires. BQI(bone quality index) of the subjects were measured by Quantitative Ultrasound (QUS). The results are summarized as follows: The average height, weight, BMI and osteopenia percentage of the major and non-major male and female student were l74.49cm, 67.05kg, 21.96 and 22.0%; l74.34cm, 65.98kg, 21.69 and 11.8%; l60.76cm, 54.48kg, 21.07 and 40.0%; l61.30cm, 54.22kg, 20.84 and 40.2%, respectively. The BQI of the major and non-major subjects were 108.07 and 110.47 in male student group, and 89.13, 88.18 in female student group, respectively. The T-score and Z-score of bone density of the subjects were not significantly different. Weight and BMI were positively related with BQI in male and female group but the relationship with BMI tended to be stronger in non-major female group than other groups. BQI was positively affected by exercise time, favorite food, and intake of seafood and tea in major and non-major male student group. One-side eating habit and intake of instant foods were negatively related with BQI in both male groups. In major and non-major female student group, exercise time, meal regularity, favorite food, amount of meal, intake of tofu were related with BQI positively and intake of tea and/or meats negatively. The result of this study revealed that desirable food habits, dietary behavior and health-related lifestyle may have a beneficial effect on bone density. They need practically and systematically organized nutrition education on optimum body weight, good eating habits, weight bearing exercise and intakes of good quality nutrient for higher bone density level.