• Journal of Nutrition and Health
• /
• v.54 no.5
• /
• pp.425-434
• /
• 2021

The discovery of the relationship between nutrients and deficiency diseases during the 100 years from the mid-1800s to the mid-1900s was a breakthrough that led to advances in the study of nutrition. The Recommended Dietary Allowances (RDA) were created as a quantitative standard for avoiding diseases caused by nutrient deficiency. In addition, a reductionism paradigm has become generally accepted among nutrition scholars in health and disease, which focused on the properties of individual nutrients, content in foods, cellular levels, and mechanisms of action. The reductionist paradigm worked very well for the prevention and treatment of malnutrition diseases. However, as the incidence of nutrient deficiencies decreased and that of chronic diseases increased, the nutrition goals have been changed to secure safe and adequate nutrient intake and to reduce chronic disease risks. Accordingly, Dietary Reference Intakes (DRIs), a set of nutrient-based reference values, were designed to replace the RDA. The revised Korean DRIs were published for 40 nutrients in 2020. However, there is still room for improvement in the reference intake levels targeted at reducing the risk of chronic disease. The reductionist approach can no longer be practical because chronic diseases are related to the interactions between multi-components in the foods and multi-targets in the body. Therefore, a second innovative leap is needed following the nutrition development breakthrough made over 100 years ago. To this end, the nutrition paradigm must evolve from reductionism to a holism approach. Cutting-edge scientific technologies, such as metabolomics, transcriptomics, microbiomics, and bioinformatics, should also be acceptable in nutrition science based on the knowledge gained from basic nutrition studies.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.1-17
• /
• 2021

It is important to evaluate the fracture network in a rock volume because fractures control the ground conditions and fluid flow characteristics. Therefore, various attempts have been made to quantify fracture networks to better understand ground and flow conditions. The use of fracture density alone (a quantitative parameter based on geometric analysis) does not fully explain the evolution of fracture networks, or quantify the spatial relationship (e.g. connectivity) of fractures in a rock mass. Therefore, the need for fracture network characterization based on topological analysis has recently emerged. In Korea however, the topological analysis of fracture networks within a rock mass has rarely been studied. As such, the definition of the topological analysis of fracture networks and the graph theory related to the topological analysis are briefly summarized in this study. We also introduce an application method for these analyses to fracture characterization. If the topological method is used for the analysis of fracture networks, it can also be adopted to analyze fluid flow characteristics of groundwater, characterize petroleum reservoirs, and analyze the evolution of a fracture network. In addition, topological analysis can be useful for site selection of major facilities such as nuclear waste disposal sites because it can be used to evaluate the stability of the potential sites.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.60-66
• /
• 2021

Various insects live around us. Nowadays, insects are raised as a hobby at home or medicinal insects are bred in large quantities for commercial purposes. In addition, various studies have been conducted to understand the various growth characteristics of insects. In the laboratory, environmental factors were changed to do that, but only the growth characteristics could be analyzed. However, it is almost not easy to measure the skin temperature or body temperature basically needed to reveal the growth characteristics in the case of insects. In particular, the results of experiments on the skin temperature of winged insects are very insufficient. In this study, the skin temperature of insects was photographed and measured for bees and butterflies living in natural conditions under various biological activity conditions such as at rest and during flight using a thermal imaging camera, a non-contact temperature measurement method. Through quantitative analysis of the experimental results, the relationship between the biological activity characteristics of each insect and the skin temperature resulting from such biological activity was investigated. In addition, it was confirmed that honeybees maintained different skin temperatures for three important activities, such as flying, honey collection, and relocation, and that the butterflies performed a warm-up stage for flight similar to the characteristics of moths.

• The Korean Journal of Franchise Management
• /
• v.10 no.2
• /
• pp.49-58
• /
• 2019

Purpose - As the growth potential of the cultural contents industry steadily grows, the cinemas industry is growing fast especially due to popularity and commerciality. The recent in the cinemas industry is evolving on multiplex cinemas that combine cultural facilities such as theaters, restaurants, and shopping centers. Due to the rapid growth of multiplex cinemas, many researchers have studied the characteristics of visiting customers in Korea. Among them, selection attribute of multiplex cinemas, including the service quality and physical environment, is important because it may examines the cause of customer 's behavior. Thus, this research focuses on the effects of the selection attributes of the multiplex cinemas on customer satisfaction and their loyalty. This research suggests the guidelines for how cinemas should manage their customers and build their customers satisfaction and loyalty that improve business performance. Research design, data, and methodology - This study tests the structural relationship between selection attributes of multiplex cinemas, customer satisfaction, and loyalty. selection attributes of multiplex cinemas divide into five sub-dimensions such as movies facility quality, services, cleanliness, accessibility, and snack bars quality. In order to examine the purposes of this research, research model and hypotheses were developed. All constructs were measured with multiple items developed and tested in the previous studies. The data were collected from 100 students in their 10-20s and were analyzed using SPSS 22.0, SmartPLS 3.0 and fsQCA program. Result - The findings of this research are as follows. First, all selection attributes except cleanliness have significant positive impacts on customer satisfaction and loyalty. Second, customer satisfaction has significant positive impact on loyalty. Third, as a result of fsQCA, high satisfaction and high accessibility were the necessary conditions on loyalty. Fourth, the necessary conditions for male and female groups were different. Conclusions - The implications of this study are as follows. Overall, multiplex cinemas should manage selection attributes basically regardless of the type of theater. Especially, cleanliness was not significant, but the customer probably consider it an essential and basic factors. Also, they are able to manage the selection attributes differently depending on the type of gender. For the male customers, it is effective that centralized strategy and for female customers, it is effective that emphasized the multiplex cinemas image.

• The Journal of the Korea Contents Association
• /
• v.20 no.12
• /
• pp.1-12
• /
• 2020

The study is to analyze the value of satisfaction of instructional process to university students and to verify the relationship between the factors that how students make the team for class activity and instructional effect. According to this, the purpose of this study is to analyze the effect of lecture-based instruction and the project-based learning and verify the component factor of project-based learning so that this study can suggest various ways to participate in classes actively. For this study, the students participating in the classes from this researcher were selected and it was analyzed with quantitative and qualitative research. The qualitative research was in progress for 15 weeks class from September to December 2019 and the survey was done at the last day of 15 weeks class and project. Frequency, difference, correlation and regression analysis were conducted through SPSS 23.0 with 80 copies of the questionnaire. The result of this study, at first, the instructional effect and satisfaction of satisfaction on project-based learning is higher than teacher-centered instruction. Second, the team cohesion and team-work is giving a huge impact on instructional effect and satisfaction. At last, project-based leaning makes students participate in the class. Enjoy and satisfy in the course of class participation regardless of the result. Based on these findings, we are looking for the ways to use the project-based leaning and provide the objective data for the planning and production of class program to improve the effectiveness of the class. In addition, we discussed the implications and limitations of this study as well.

• Korean Journal of Metals and Materials
• /
• v.46 no.2
• /
• pp.65-68
• /
• 2008

Generally CCM (cold crucible melting) is not suitable for melting glass. However, in this study we described the quantitative relationship between the basic property of glass and power balance, the power absorption in the melt, the losses in the coil and the cold crucible, for melting glass in CCM. The dependence of power balance on the applied frequency and the electric conductivity has been found. Above 300 kHz, the glass (B) contained alkali ion which has the low resistance $3.0{\Omega}{\cdot}cm$ at $900^{\circ}C$ and $1.36{\Omega}{\cdot}cm$ at $1,100^{\circ}C$ was melted easily and 60% of the overall power was absorbed in the melt and 30% and 10% of the overall power was lost in the cold crucible and coil respectively. Under the same condition, the glass (A) contained non-alkali ion was not melted easily and 50% of the overall power was absorbed in the melt and 40% and 10% of the overall power was lost in the cold crucible and coil respectively. In conclusion, the small absorbed power of the overall power in melt prevented a successful melting as for glass A, and the successful melting depends on the relative size of the absorbed power in melt irrespective of the melting volume. Hence, as typical for direct induction heating method(CCM), the successful melting strongly depended on the chosen working frequency based on electric conductivity of glass, power balance and the control of the critical power which was absorbed in melt.

• Communications of Mathematical Education
• /
• v.35 no.2
• /
• pp.153-172
• /
• 2021

Various competencies such as critical thinking, systems thinking, problem solving competence, communication skill, and data literacy are likely to be required in the 4th industrial revolution. The competency regarding data literacy is one of those competencies. To nurture citizens who will live in the future, it is timely to consider research on teacher education for supporting teachers' development of statistical thinking as well as statistical knowledge. Therefore, in this study we developed and implemented a data analysis project for pre-service teachers to understand their changes in statistical knowledge in addition to their experiences of data-driven decision making process that required them utilizing their statistical thinking. We used a mixed method (i.e., sequential explanatory design) research to analyze the quantitative and qualitative data collected. The findings indicated that pre-service teachers have low knowledge level of their understanding on the relationship between population means and sample means, and estimation of the population mean and its interpretation. When it comes to the data-driven decision making process, we found that the pre-service teachers' experiences varied even when they worked as a small group for the project. We end this paper by presenting implications of the study for the fields of teacher education and statistics education.

• Journal of the Korea Convergence Society
• /
• v.12 no.6
• /
• pp.225-232
• /
• 2021

The purpose of this study is to identify the psychological characteristics of the elderly and to investigate the variables that affect the life satisfaction of the elderly. To achieve this purpose, psychological characteristics such as self-esteem, alienation, loss, and depression were selected. A survey was conducted on the elderly living in Gwangju Metropolitan City. A total of 218 copies were collected and 203 copies were analyzed, excluding poor responses. To draw the results of the research, quantitative analysis was conducted through questionnaires, and SPSSWIN 21.0 statistical program was used as an analysis tool. The analysis methods were frequency and ratio analysis, technical statistical analysis, bivariate correlation analysis, and linear regression analysis. The results of the analysis are as follows: First, the relationship between the psychological characteristics of the elderly showed significant correlations among the self-esteem, alienation, loss, depression, and life satisfaction of the elderly. Second, for the elderly, alienation and depression had a negative effect on life satisfaction, and self-esteem had a positive effect on life satisfaction. However, loss did not have a significant effect on life satisfaction. In conclusion, it suggests that it is necessary to develop and operate policies and programs to improve self-esteem and reduce alienation and depression in order to improve the quality of life of the elderly.

• Animal Bioscience
• /
• v.34 no.8
• /
• pp.1392-1402
• /
• 2021

Objective: The growth rate of pigs is related to differentiation and proliferation of muscle cells, which are regulated by growth factors and expression of growth-related genes. Thus, the objective of this study was to establish optimal culture conditions for Jeju black pig (JBP) muscle cells and determine the relationship of various factors involved in muscle growth with the proliferation of JBP muscle cells. Methods: Muscles were taken from the femur skeletal muscle of JBP embryos. After isolation of the muscle cells, cells were cultured in a 6-well plate under four different culture conditions to optimize culture conditions for JBP muscle cells. To analyze proliferation rate of JBP muscle cells, these muscle cells were seeded into 6-well plates at a density of 1.5×10⁵ cells per well and cultured for 3 days. Western blot and quantitative real-time polymerase chain reaction were applied to verify the myogenic differentiation 1 (MyoD) expression and growth-related gene expression in JBP muscle cells, respectively. Results: We established a muscle cell line from JBP embryos and optimized its culture conditions. These muscle cells were positive for MyoD, but not for paired box 7. The proliferation rate of these muscle cells was significantly higher in a culture medium containing bFGF and epidermal growth factor + basic fibroblast growth factor (EGF+bFGF) than that without a growth factor or containing EGF alone. Treatment with EGF and bFGF significantly induced the expression of MyoD protein, an important transcription factor in muscle cells. Moreover, we checked the changes of expression of growth-related genes in JBP muscle cells by presence or absence of growth factors. Expression level of collagen type XXI alpha 1 gene was changed only when EGF and bFGF were added together to culture media for JBP muscle cells. Conclusion: Concurrent use of EGF and bFGF increased the expression of MyoD protein, thus regulating the proliferation of JBP muscle cells and the expression of growth-related genes.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.59-72
• /
• 2021

Research in which an individual's entrepreneurial spirit contributes to the country's economic development through revitalization of entrepreneurship is being actively conducted, but studies related to individual satisfaction or life satisfaction are still insufficient. This study aims to clarify the influence of young adults' entrepreneurial spirit on their life satisfaction and at the same time verify the mediating effect of self-efficacy and self-determination. In addition, an empirical analysis was conducted on 511 young people to reveal the effectiveness of participation in government start-up support projects. The research results are as follows. First, the entrepreneurial spirit had a positive effect on the life satisfaction of young people. Second, self-determination and self-efficacy played a role in mediating the relationship between entrepreneurship and life satisfaction. Finally, participation in start-up support projects did not show a statistically significant moderating effect. This study is expected to provide a clue that life satisfaction can act as a major variable in the impact of entrepreneurship on entrepreneurship. It also implies that the performance of the government start-up support project should be considered not only about the quantitative performance such as sales and employment effect, but also the qualitative performance such as personal life satisfaction.