• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.227-239
• /
• 2018

Background: Predicting the potential habitat of plants in arid regions, especially for medicinal ones, is very important. Although Pergularia tomentosa is a key species for medicinal purposes, it appears in very low density in the arid rangelands of Iran, needing an urgent ecological attention. In this study, we modeled and predicted the potential habitat of P. tomentosa using maximum entropy, and the effects of environmental factors (geology, geomorphology, altitude, and soil properties) on some characteristics of the species were determined. Results: The results showed that P. tomentosa was absent in igneous formation while it appeared in conglomerate formation. In addition, among geomorphological units, the best quantitative characteristics of P. tomentosa was belonged to the conglomerate formation-small hill area (plant aerial parts = 57.63 and root length = 30.68 cm) with the highest electrical conductivity, silt, and $CaCO_3$ content. Conversely, the species was not found in the mountainous area with igneous formation. Moreover, plant density, length of roots, and aerial parts of the species were negatively correlated with soil sand, while positive correlation was observed with $CaCO_3$, EC, potassium, and silt content. The maximum entropy was found to be a reliable method (ROC = 0.91) for predicting suitable habitats for P. tomentosa. Conclusion: These results suggest that in evaluating the plant's habitat suitability in arid regions, contrary to the importance of the topography, some environmental variables such as geomorphology and geology can play the main role in rangeland plants' habitat suitability.

• Korean Journal of Plant Resources
• /
• v.15 no.1
• /
• pp.36-42
• /
• 2002

Sixteen Atractylodes japonica Koidz. accessions were collected in Jeonbuk, Kyeongnam, Kangwon and Kyeonggi province, and their quantitative characteristics were compared with each other. The relationship of variation between Atractylodes japonica Koidz. accessions was also investigated by means of multivariate analysis. Hamyang 1 accession had the most desirable quantitative characteristics among the accessions: plant height was 86.2cm, number of leaves, 117.2 and number of stems, 34.3. Sudo 1 accession had 12 stems, the most among the accessions. The length of leaf margin serras found in all of them was on average 1.6mm. Most accessions had simple or palmately compound leaf with oval or elliptical type of the leaf shape. The accessions could be classified into three groups by average linkage cluster method. The most remote relationship was found between Group 1 containing Jinan 1, Jinan 2 and Group 3 containing Jeongsu, and Geoje.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.6
• /
• pp.381-388
• /
• 2017

Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 cm to 40.5 cm, with showing approximately 40% having a stem length of 20 - 30 mm. Stem diameters ranged from 2.7 mm to 11.3 mm. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from $28^{\circ}$ to $89^{\circ}$ and seedstalk length ranged from 5.6 cm to 27.3 cm. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.38-48
• /
• 2013

Decomposition of plant material is an important component in the study of forest ecosystem because of its critical role in nutrient cycling. Different tree species has different nutrient release patterns, which are related to leaf litter quantitative traits and seasonal environmental factors. The quantitative traits of leaf litter are important predictors of decomposition and decomposition rates increase with greater nutrient availability in the forest ecosystems. At the ecosystem level, litter quantitative traits are most often related to the physical and chemical characteristics of the litter, for example, leaf toughness and leaf mass per unit area, and lignin content tannin and total phenolics. Thus, the analysis of litter quantitative traits and decomposition are highly important for the understanding of nutrient cycling in forest ecosystems. By studying the role of litter quantitative traits on decomposition and nutrient cycling in forest ecosystems will provide a valuable insight to how quantitative traits influence ecosystem nutrient dynamics. Such knowledge will contribute to future forest management and conservation practices.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.6
• /
• pp.862-879
• /
• 2001

The walls of all higher plants are organized as a cellulosic, fibrillar phase embedded in a matrix phase composed of non-cellulosic polysaccharides, some proteins and, in most secondary walls, lignin. At the effective utilization of plant biomass, qualitative and quantitative analyses of plant cell walls are essential. Structural features of individual components are being clarified using newly developed equipments and techniques. However, "empirical" procedures to elucidate plant cell walls, which are not due to scientific definition of components, are still applied in some fields. These procedures may give misunderstanding for the effective utilization of plant biomass. In addition, interesting the investigation of wall organization is moving towards not only qualitatively characterisation, but also quantitation of the associations between wall components. These involve polysaccharide-polysaccharide and polysaccharide-lignin cross-links. Investigation of the associations is being done in order to understand the chemical structure, organization and biosynthesis of the cell wall and physiology of the plants. Procedures for qualitative and quantitative analyses based on the definition of cell wall components are reviewed focussing in nutritional elucidation of forage grasses by ruminant microorganisms.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.820-830
• /
• 2016

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1392-1398
• /
• 2005

API 581 guideline provides a methodology for calculating the risks of equipments in refinery or petrochemical plant. However, especially in part of the consequence of failure, there is a major limitation of its application to the petrochemical plant directly since only a representative material is considered in calculating the risk while the equipment is composed of numerous materials. The objectives of this paper are to propose an enhanced risk-based inspection (RBI) technique to resolve shortcomings inclusive of the above issue and to assess the risks of typical petrochemical equipments. In this respect, a program incorporating material database was developed to fully incorporate the characteristics of different materials. The proposed RBI program consists of qualitative, semi-quantitative and quantitative risk evaluation modules in which toxic materials as well as representative materials were selected automatically for comparison to those in the current guideline. It has been applied to assess the risks of equipments in ethylene facilities of petrochemical plants. Thereby, more realistic evaluation results were obtained and applicability of the proposed RBI program was proven.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.31-31
• /
• 2023

Mung bean(Vigna radiata (L.) R. Wilczek var. radiata) is a legume that originated in India. It is the third most cultivated legume in Korea after soybean and adzuki bean. Recently, the use of mung bean seeds and sprouts in trendy foods such as rice noodles and Chinese-style stir-fry is expanding thereby increasing its demand. Subsequently, improvement of mung bean varieties is also being actively conducted. In this study, the important agricultural characteristics of 324 mung bean germplasm were recorded and statistically investigated. Seeds of the mung bean germplasm were cultivated at an experimental field located in the National Agrobiodiversity Center (Jeonju, Korea) and 10 quantitative agricultural traits were investigated. Basic statistics, correlation analysis, and principal component analysis were then performed. The results showed significant variations of the quantitative traits among the germplasms (p < 0.05). The days to flowering, maturity, and growth were in the ranges of 31~80, 22~72, and 57~110 days with means of 45, 47, and 92 days, respectively. The highest frequency (f = 192) was for lodging score with 11~50%, while simultaneous maturity (f = 182) was below 50%. Other quantitative traits related to yield including the number of seeds per pod (CV = 10.9%), number of pods per plant (CV = 41.2%), and one-hundred seeds weight (CV = 36.6%) also showed significant variations. Correlation analysis showed positive correlations between the days to maturity and one-hundred seeds weight (r = 0.41) and the days to growth and simultaneous maturity (r = 0.39). In contrast, one-hundred seeds weight was negatively correlated to the number of pods per plant (r = -0.41) and the days to flowering (r = -0.29). Similarly, the days to growth and the number of pods per plant had a negative association with each other (r = -0.29). The principal component analysis revealed the number of days to maturity as the most influential variable along the first principal component (23.7%). In general, this study revealed wide variations in quantitative traits among the studied mung bean germplasm, which could provide several options for cultivar development.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.2
• /
• pp.39-46
• /
• 2023

Purpose: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Research design, data and methodology: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Results: As a result of the analysis of qualitative and quantitative factors, the arithmetic sum of the qualitative factors of the total six projects is 160, accounting for 80% of the total number of reduction measures, and the quantitative factors are 40, accounting for 20%. Among them, the number of qualitative reduction measures reached 97.4% for animal and plant items, and more than 90% for air quality, noise and vibration, and eco-friendly resource circulation items. Conclusions: Therefore, it is necessary to avoid establishing qualitative reduction measures and set quantitative measures as the basis, but to specify the specifications, size, and installation location related to the reduction measures, and to calculate the numerical reduction efficiency.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.38-38
• /
• 2019

Among the 6500 accessions of the pepper germplasm which conserved at RDA Genebank, 319 accessions were investigated charateristics such as their growth habit, flowering and fruit shape in Capsicum frutescens. All accessions were characterized for their 14 qualitative and 16 quantitative characters. Results revealed that both qualitative and quantitative characters exhibited wide variation among the studied germplasm. The hypocotyl color, which investigated in juvenile stage, was divided in three types such as green, purple, and purple with green, and most of the accessions showed in purple. Flowering starts from 7 May, and most accessions were starting to flower from 27 May to 25 June. The fresh color of the mature pepper were red, yellow, orange, Etc. Fruit shape were mostly elongated, while exhibited ball shape and round shape were a few. The fresh weight of fruits ranged from 0.2 to 42.3, and the diameter of fruit showed from 4.2 to 45.1 mm, respectively. The phenotypic diversity exists in Capsicum frutescens. provide valuable information to improve agronomic traits in pepper breeding program.