• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.127-129
• /
• 2008

EPR spectroscopic technique was applied for a quantitative analysis of Eu(II) for a speciation of europium in a LiCl-KCl eutectic melt. By adopting the first absorption line of each isotopes (151Eu and 153Eu), a calibration plot was obtained. The calibration of the EPR intensity shows a good linearity according to the amount of Eu(II). The EPR intensity was identified to increase proportionally with a decrease of the attenuation parameter for EPR microwave power. The fluorescence technique was used qualitatively to find whether either of Eu(II) or Eu(III) ions exists in a molten salt sample. The ICP-AES technique was also adopted to determine the total concentration of europium in the sample, since EPR is only sensitive for detecting the Eu(II) ion. The extent of the reduction of Eu(III) in the LiCl-KCl eutectic melt at 723 K was determined by using this technique.

• 정보학연구
• /
• 제2권2호
• /
• pp.13-22
• /
• 1999

본 논문에서, 부분방전 메카니즘을 진단하고 그리고 신경망을 도입하여 수명을 예측하기 위한 기초연구로서, 온라인상에서 자동진단을 제안했다. 제안한 방법에서 우리는 음향방출 감지시스템과 그리고 펄스 수와 펄스진폭에 의해서 정량적인 통계파라메타를 사용하였다. 통계적인 파라메타인 가령, 무게중심(G)와 방전분포 경도(C)를 이용하였고 그리고 초기단계와 중기단계에 대해서 분석하였다. 정량적인 통계파라메타들은 신경망에 의해서 학습되어졌다. 초기단계에 의해서 수명예측과 절연열화의 진단이 이루어졌다. 열화가 진행하는 동안 신경망 학습을 통한 휼륭한 진단능력이 있음이 근본적으로 드러났고, 신경망이 부분방전에 있어서 절연진단 및 수명예측을 위해서 적절하다는 것이 증명되었다.

• 조명전기설비학회논문지
• /
• 제16권4호
• /
• pp.1-7
• /
• 2002

정량적 궤환이론(Quantitative Feedback Theory : QFT)은 플랜트 불확실성과 외란에도 불구하고 요구된 시스템의 제어성능을 성취하기 위해서 궤환의 사용을 강조하는 매우 실제적인 설계기법이다. 이 QFT의 루프형성과정은 요구된 경계조건이 만족될 때까지 강인한 제어기를 설계하는 것을 허용한다. 본 논문에서는 QFT의 루프형성을 이용한 PID 제어기의 최적 설계방법을 제안한다. 제안된 방법은 QFT 경계조건에 의해 얻어진 2차원의 시스템 행렬과 출력 벡터를 재배열하는 것으로부터 전개된 선형 연립방정식으로부터 PID 제어기의 파라미터 벡터를 식별하는 방식이다. 제안된 방법의 유용성은 터빈의 속도제어 문제에 의해 검증하였다.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.221-229
• /
• 1999

We examined the governing factors of fatigue limit in annealed and austempered ductile iron specimens machined micro hole(dia.<0.4mm) in rotary bending fatigue test. Also, the quantitative relationship between fatigue limit and maximum defect size in specimens was investigated. Artificial defect(micro-pit type, dia.<0.4mm) on specimen surface did not bring about an obvious reduction of fatigue limit in austempered ductile iton(ADI) as compared with annealed ductile iron. According to the investigation of ${\sqrt{area}}_c$ which is the critical defect size to crack initiation at artificial defect, ${\sqrt{area}}_c$ of ADI was larger than that of annealed ductile iron. This shows that the situation of crack initiation at artificial defect in ADI is more difficult in comparison with annealed ductile iron. Maximum defect size is one of the important parameters to predict fatigue limit. And, the quantitative relationship, between the fatigue limit ${\sigma}_{\omega}$ and the maximum defect size ${\sqrt{area}}_{max}$ can be expressed to ${\sigma}_{\omega}^n{\cdot}{\sqrt{area}}_{max}=C_2$ where, $C_2$ are constant. Moreover, it is possible to explain the difference in fatigue limit between, austempered and annealed ductile iron by introducing the parameter ${\delta}(=N_{sg}/N_{total})$in a plain spectimen.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.462-472
• /
• 1999

De-NOx facility using Selective Catalytic Reduction method is the most widely applied one that removes NOx from flue gas emitted from combustion facility such as boiler for power generation engine incinerator etc. Reductant $NH_3\;or\;NH_4OH$ is sprayed into flue gas to convert NOx into $H_2O$ and $N_2.$ Good mixing between flue gas and $NH_3$ is the most important factor to increase reduction in catalytic layer and to reduce unreacted NH3 slip. Therefore the development of mixer device for mixing effect is one of the important part for SCR facility. Objectives of this study are to investigate the relation between flow and concentration field by observation at the wake of delta-wing type mixer. At the first stage qualitative measurement of flow field is conducted by flow visualization using laser light sheet in lab. scale wind tunnel. Also we have conducted the quantitative analysis by comparing flow field measurement using LDV with numerical simulation. On the basis of qualitative and quantitative analysis we investigate the dis-tribution of flow and concentration in flow model facility. The results of an experimental and compu-tational examination of the vortex structures shed from delta wing type vortex generator having $40^{\circ}$ angle of attack are presented, The effects of vortex structure on the gas mixing is discussed, too.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.813-819
• /
• 2014

The purpose of this study was to extract accurate parameters of facial movement features using 3-D motion capture system in speech recognition technology through lip-reading. Instead of using the features obtained through traditional camera image, the 3-D motion system was used to obtain quantitative data for actual facial movements, and to analyze 11 variables that exhibit particular patterns such as nose, lip, jaw and cheek movements in monosyllable vocalizations. Fourteen subjects, all in 20s of age, were asked to vocalize 11 types of Korean vowel monosyllables for three times with 36 reflective markers on their faces. The obtained facial movement data were then calculated into 11 parameters and presented as patterns for each monosyllable vocalization. The parameter patterns were performed through learning and recognizing process for each monosyllable with speech recognition algorithms with Hidden Markov Model (HMM) and Viterbi algorithm. The accuracy rate of 11 monosyllables recognition was 97.2%, which suggests the possibility of voice recognition of Korean language through quantitative facial movement analysis.

• 대한화학회지
• /
• 제42권4호
• /
• pp.378-382
• /
• 1998

Phenylcyclohexylamine과 dexoxadrol에 대한 정량적 구조-작용 상관관계에 관한 계산을 반경험적 분자궤도법인 PM3와 Hyper Chem 프로그램을 이용하여 수행하였다. 19개의 PCA 유도체들의 프론티어 오비탈 크기와 LogP 값은 운동에 영향을 미치는 독성과 MES 발작 실험에서 $MES\;ED_{50}$과 $TD_{50}$을 예측하는 좋은 매개 변수라는 사실을 알았다.

• Smart Structures and Systems
• /
• 제16권1호
• /
• pp.67-79
• /
• 2015

Acoustic emission analysis is an effective technique for monitoring the evolution of damage in a structure. An experimental analysis on a set of reinforced concrete beams under flexural loading was carried out. A mixed AE analysis method which used both parameter-based and signal-based techniques was presented to characterize and identify different failure mechanisms of damage, where the signal-based analysis was performed by using the Hilbert-Huang transform. The maximum instantaneous energy of typical damage events and the corresponding frequency characteristics were established, which provided a quantitative assessment of reinforced concrete beam using AE technique. In the bending tests, a "pitch-catch" system was mounted on a steel bar to assess bonding state of the steel bar in concrete. To better understand the AE behavior of bond-slip damage between steel bar and concrete, a special bond-slip test called pullout test was also performed. The results provided the basis of quantitative AE to identify both failure mechanisms and level of damages of civil engineering structures.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.457-460
• /
• 2002

The image quality of three-dimensional (3D) images has been widely investigated by the qualitative analysis method. A need remains for an objective and quantitative method to assess the image quality of 3D volume-rendered images. The purpose of this study was to evaluate the quantitative accuracy of distance measurements on 3D volume-rendered images of a dry human skull by using multi-detector computed tomography (MDCT). A radiologist measured five times the twenty-one direct measurement line items composed among twelve reference points on the skull surface with a digital vernier caliper. The water filled skull specimen was scanned with a MDCT according to the section thicknesses of 1.25, 2.50, 3.75, and 5.00 mm for helical (high quality; pitch 3:1) scan mode. MDCT data were reconstructed with its acquisition section thickness and with 1.25 mm section thickness for all scans. An observer also measured seven times the corresponding items on 3D volume-rendered images with measuring tools provided by volumetric analysis software. The quantitative accuracy of distance measurements on the 3D volume-rendered images was statistically evaluated (p-value < 0.05) by comparatively analyzing these measurements with the direct distance measurements. The accuracy of distance measurements on the 3D volume-rendered MDCT images acquired with 1.25, 2.50, 3,75 and 5.00 mm section thickness and reconstructed with its section thickness were 48%, 33%, 23%, and 14%, respectively. Meanwhile, there were insignificant statistical differences in accuracy of distance measurements among 3D volume-rendered images reconstructed with 1.25 mm section thickness for the each acquisition section thickness. MDCT images acquired with thick section thickness and reconstructed with thin section thickness in helical scan mode should be effectively used in medical planning of 3D volume-rendered images. The quantitative analysis of distance measurement may be a useful tool for evaluating the quantitative accuracy and the defining optimal parameters of 3D volume-rendered CT images.

• 한국농림기상학회지
• /
• 제22권3호
• /
• pp.194-204
• /
• 2020

작물 모형의 품종에 따른 특성을 나타내는 품종 모수를 추정하기 위해서는 많은 양의 생육 관측 자료가 요구되며, 이를 확보하기 위해서는 많은 비용과 노력이 요구된다. 고품질 자료는 아니더라도 공개되어 있는 작물 생육 자료를 활용하여 모수 추정에 사용할 수 있으나, 이러한 자료의 품질에 대한 평가가 선행되어야 한다. 본 연구에서는 농업자료에 대한 정량적 평가 도구인 DatasetRanker를 사용하여 벼에 대한 지역적응시험 자료를 평가하였다. 또한, 결과를 바탕으로 자료의 품질을 개선하기 위한 관측체계의 개선방안을 제시하고자 하였다. 평가 결과 각각의 품종들은 모두 네 등급 중 세 번째로 높은 은 등급으로 평가되었으며, 더 상위의 등급을 얻지 못한 것은 대체로 생육 및 생육환경에 대한 관측자료의 부족에 기인하였다. 결과를 개선하기 위해서는 추가적인 관측자료가 요구되며, 일부 재배관리 등의 기본적인 조건들에 대한 정보를 추가하는 것만으로도 품질에 대한 평가 점수가 약 10%정도 상승할 것으로 예상되었다. 또한, 정확한 위치정보가 공개될 경우 이를 기준으로 수집되는 토양 정보와 기상 정보의 불확실성을 감소시킬 수 있을 것이다. 생육기간 중 시계열적인 관측자료가 수집된다면 품질이 상당히 개선될 것으로 예상되었으며, 이를 위한 연구가 지속적으로 이루어져야 할 것이다.