• 대한치과의사협회지
• /
• 제55권5호
• /
• pp.358-364
• /
• 2017

Nowadays, there has been an increasing interest in the preservation of natural dentition and the proper occlusion related to tooth wear for quality of life. Tooth wear means the loss of tooth enamel structure. This is happened by many causes which is the combined effects of many mechanisms. For keeping proper occlusion, dentists should check tooth wear status with acceptable methods and tools for the proper diagnosis. Until now, there have been many traditional qualitative ways to measure tooth wear which are intuitive, rapid, and simple. On the contrast, they are not objective nor reproducible. With the development of related technique, new quantitative methods using CAD and 3d scanners. This article aimed to introduce qualitative and quantitative methods for tooth wear measurements.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.993-1001
• /
• 2000

This research features a method that quantitatively evaluates the performance of edge detection algorithms. Contrary to conventional methods that evaluate the performance of edge detection as a function of the amount of noise added to he input image, the proposed method is capable of assessing the performance of edge detection algorithms based on chosen parameters that influence the performance of edge detection. We have proposed a quantitative measure, called average performance index, that compares the average performance of different edge detection algorithms. We have applied the method to the commonly used edge detectors, Sobel, LOG(Laplacian of Gaussian), and Canny edge detectors for noisy images that contain straight line edges and curved line edges. Two kinds of noises i.e, Gaussian and impulse noises, are used. Experimental results show that our method of quantitatively evaluating the performance of edge detection algorithms can facilitate the selection of the optimal dge detection algorithm for a given task.

• Annals of Clinical Neurophysiology
• /
• 제9권2호
• /
• pp.43-50
• /
• 2007

Analysis of intraepidermal nerve fibers using skin biopsy is a recently developed technique, providing diagnostic information on small fiber neuropathies. The specimens are obtained by 3 mm punch biopsy, which is safe and minimally invasive. Immunohistochemical staining by Protein gene product (PGP) 9.5 demonstrate not only intraepidermal nerve fibers but dermal structures, such as sweat gland and erector papillae. Up to now, many studies agree that intraepidermal nerve fiber density is dramatically reduced in various sensory neuropathies. The utility of density measure was confirmed with high sensitivity in the diagnosis of sensory neuropathy, comparable to sural nerve biopsy or quantitative sensory testing. Besides quantitative methods, morphological changes like axonal swelling and fragmentation can be used as predegenerative markers. This article reviews the technique of skin biopsy and clinical and experimental usefulness of skin biopsy in diagnosing and monitoring peripheral neuropathies.

• 대한화장품학회지
• /
• 제26권1호
• /
• pp.233-238
• /
• 2000

We developed a quantitative method for evaluating CEP(color expression power) in eye shadow. This method enables the cosmetic industry to measure CEP on an interval scales, so it is more accurate and reproducible than previous panel tests. Oil, colorants, Pigments and pearls are major factors affecting CEP in eye shadow formulas. We studied the oil effect on CEP using our unique method so CEP could be improved. We believe this method can be applied to other color cosmetics as well. In conclusion, we expected this method to be useful to formulator who want to improve the color expression power in color cosmetics. Additionally, we hope it will contribute toward developing the experiential know-how about color to scientific knowledge.

• 한국멀티미디어학회논문지
• /
• 제22권9호
• /
• pp.1020-1028
• /
• 2019

Cerebrovascular disease is a common disease in the elderly population. However, we do not have enough understanding of brain-related diseases. Recent advances in microscopy technology have resulted in the acquisition of vast amounts of image data sets for small organs, and it has become possible to handle vast amounts of image data sets due to improved computer performance and software technology. In this paper, the author proposes introduce a method for classifying and analysing only cerebrovascular information in the mouse brain image, as well as a quantitative measure of the portion of the cerebrovascular in the mouse brain. The study of the cerebrovascular structure is significant, and it can be helpful to improve the understanding of cerebrovasculature. As a result, the author expects that this study will be useful for neuroscientists conducting clinical research.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1012-1012
• /
• 2001

The elegant early experiments of Herschel demonstrated that there is light after the visible spectrum in a region we call the near infrared (NIR). This was followed by the work which showed that the spectrum went further into what we call the mid infrared (MIR). The MIR has been used for many years as a qualitative and quantitative region to measure constituent values. The MIR region contains the fundamental vibrations which can be theoretically calculated from symmetry rules and harmonic oscillator equations. The NIR is not as straight forward because the region from 400-2500 nm does not contain any of the fundamental vibrations only combination bands and overtones. Over the past fifty years efforts to understand the NIR have largely been ignored while the quantitative aspects of the region have been utilized. This presentation will focus on the efforts to define terms for NIR, examine the calculation of combination bands and overtones and ways to interpret the spectra. The interpretation of the NIR has been aided greatly in recent years by the use of two dimensional spectroscopy which allows the correlation of bands in one spectral region with that of the NIR.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.255-256
• /
• 2021

The performance measurement of construction projects has traditionally been evaluated as a prerequisite for successful project completion. Considering this importance, the UK and the US are operating quantitative performance measurement systems for construction projects. However, in the case of Korea, there is a limit to the use of existing methods due to the limitation of data collection. Recently, in consideration of the domestic situation, research is being conducted to measure the quantitative performance of a project by using big data including progress and project attribute information. Therefore, this study aims to present the design direction of a performance monitoring system using Quality Function Deployment.

• Educational Technology International
• /
• 제20권1호
• /
• pp.83-107
• /
• 2019

The aim of this study is to provide the values and descriptive implications of the Design Thinking (DT) method into the context of educational problems of practice in an undergraduate course. To achieve the research objective, both quantitative and qualitative studies were conducted. For the qualitative study, the student's productions and reflections on the experience of the application of the DT into educational problems were analyzed. For the quantitative research, one-group pre and post-test were designed to validate the effectiveness of the DT method into educational contexts in terms of creativity level to measure the student's Creativity Potential and Practiced Creativity, Academic Self-Efficacy Scale, and Problem-Solving Inventory. This study validated that the DT method had a statistically significant influence on those three competencies and also illustrated the detailed process from a qualitative viewpoint. The results and implications reflect the potential of the DT approach with the educational problem of practice, especially, in the ill-structured problem-solving contexts for student-centered instructional setting.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.759-762
• /
• 1999

The concrete structures possessing good structural integrity can face durability problems due to deteriorations of concrete structures under various environmental conditions. The durability problems weaken the structural integrity in the long run. Especially, the excessive use of sea sand causes serious reinforcement corrosion and carbonation in concrete structures. An accelerated test is often used to predict deterioration as a qualitative measure, but without long term exposure test results or understanding of the relationship between the accelerated test and the long term exposure test, the accelerated test result alone can not be used effectively as a quantitative measure. In this paper, a methodology is proposed to predict the long term deteriorations, based on the result of the short-term accelerated test, of concrete containing different contents of chloride ions. Then, the correlation between two results on the steel corrosion ratio and the carbonation depth is analyzed for concrete with different chloride contents.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.90-94
• /
• 2012

Recently, injection molding process became more popular than ever to produce large quantities of high precision products. Extensive studies have been conducted for reducing the residual stresses and birefringence in injection-molded optical products. Flow-induced and thermally-induced stresses and birefringence have been found as two main sources during injection molding process. Generally, quantitative value of birefringence can be measured with polarizing microscope using the compensator. However, it is difficult to measure low order retardation with microscope, so developing a measurement system for low order optical path difference is in need. In the present paper, a system using Photo Elastic Modulator (PEM) is demonstrated to measure low phase retardation in injection-molded products.