• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.712-719
• /
• 2016

Understanding N mineralization dynamics in soil is essential for efficient nutrient management. An anaerobic incubation experiment was conducted to examine N mineralization potential and N mineralization rate of the organic amendments with different C:N ratio in paddy soil. Inorganic N in the soil sample was measured periodically under three temperature conditions ($20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$) for 90 days. N mineralization was accelerated as the temperature rises by approximately $10%^{\circ}C^{-1}$ in average. Negative correlation ($R^2=0.707$) was observed between soil inorganic N and C:N ratio, while total organic carbon extract ($R^2=0.947$) and microbial biomass C ($R^2=0.824$) in the soil were positively related to C:N ratio. Single exponential model was applied for quantitative evaluation of N mineralization process. Model parameter for N mineralization rate, k, increased in proportion to temperature. N mineralization potential, $N_p$, was very different depending on C:N ratio of organic input. $N_p$ value decreased as C:N ratio increased, ranged from $74.3mg\;kg^{-1}$ in a low C:N ratio (12.0 in hairy vetch) to $15.1mg\;kg^{-1}$ in a high C:N ratio (78.2 in rice straw). This result indicated that the amount of inorganic N available for crop uptake can be predicted by temperature and C:N ratio of organic amendment. Consequently, it is suggested that the amount of organic fertilizer application in paddy soil would be determined based on temperature observations and C:N ratio, which represent the decomposition characteristics of organic amendments.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4659-4664
• /
• 2015

Background: ABC proteins are one key type of transport superfamilies which undertake majority of drug transport, which affect the osteosarcoma response to chemotherapeutics. Previous studies have suggested the association between ABC polymorphisms and osteosarcoma response. However, the results of previous studies remain controversial. Therefore, we perform a meta-analysis to get a more precise estimation of this association. The association between ABC polymorphisms and osteosarcoma response was assessed by odds ratios (ORs) together with their 95% confidence intervals (CIs). Three polymorphisms of ABC including ABCB1 rs1128503, ABCC3 rs4148416 and ABCC2 rs717620 polymorphism were investigated. Overall, significant association was observed between ABCC3 rs4148416 polymorphism and osteosarcoma response under allele contrast (T vs. C: OR=1.73, 95%CI=1.09-2.74, P=0.019), homozygote comparison (TT vs. CC: OR=2.00, 95%CI=1.25-3.23, P=0.004), recessive genetic model (TT vs. TC/CC: OR=1.80, 95%CI=1.14-2.84, P=0.011) and dominant genetic model (TT/TC vs. CC: OR=1.70, 95%CI=1.20-2.42, P=0.003). Moreover, significant association was also observed in Caucasian population rather than Asian population for ABCB1 rs1128503 polymorphism. We conclude that ABCC3 rs4148416 polymorphism was significantly associated with poor osteosarcoma response and ABCB1 rs1128503 polymorphism was significantly associated with good osteosarcoma response in Caucasian population rather than Asian population.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3755-3761
• /
• 2013

This study aims to assess the ecological risk of the hazardous air pollutants (HAPs) emitted in the semiconductor manufacturing processes in Korea by using Quantitative Structure Activity Relationship (QSAR, EPA, US, EPI $Suite^{TM}$ 4.1). Owing to the absence of environmental standards of hazardous air pollutants in the semiconductor manufacturing processes in Korea, 18 HAPs in the semiconductor field included in both the US EPA NESHAPs and the hazardous air pollutant list of Ministry of Environment in Korea were selected. As a results 8 chemicals (44.4%) of the selected 18 HAPs were VOCs. Cyanides (cyanides) and ethylene oxides (epoxy resins), and tetrachloro-ethylene (aliphatic compounds, halides) showed long half-lives. Cyanide HAPs especially had the highest half-life with the estimated value of 356.533 days. Nickel compounds (heavy metal compounds) possessed the highest water solubility followed by acetaldehyde (aldehyde compounds), ethylene oxides, and 1,4-dioxanes. The halides, including tetrachloro-ethylenes, carbon tetra-chlorides, benzene (aromatic compounds), and lead (heavy metals), are estimated to take the longest time for biodegradation. Tetrachloroethylene, with the acute toxicity end point of 3.685-7.033 mg/L, was assessed to be the most highly toxic substance among the 18 HAPs. However, considering the absence of the HAPs in the common category of log $K_{ow}{\geq}4$and $BCF{\geq}500$, which indicates the standard of bioconcentration potentials, potentials of the bioconcentration are considered to be low.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.67.3-68
• /
• 2016

An X1.6 flare occurred in AR 12192 on 2014 October 22 around 14:06 UT and was observed by Hinode, IRIS, SDO and RHESSI. We analyze a bright kernel which produces a white light flare (WLF) with continuum enhancement and a hard X-ray (HXR) peak. Taking advantage of the spectroscopic observations of IRIS and EIS, we measure the temporal variation of the plasma properties in the bright kernel in the chromosphere and corona. We found that explosive evaporation was observed when the WLF occurred, even though the intensity enhancement in hotter lines is quite weak. The temporal correlation of the WLF, HXR peak, and evaporation flows indicates that the WLF was produced by accelerated electrons. To understand the white light emission processes, we calculated the deposited energy flux from the non-thermal electrons observed by RHESSI and compared it to the dissipated energy estimated from the chromospheric lines (Mg II triplet) observed by IRIS. The deposited energy flux from the non-thermal electrons is about $3.1{\times}10^{10}erg\;cm^{-2}s^{-1}$ when we assume a cut-off energy of 20 keV. The estimated energy flux from the temperature changes in the chromosphere measured from the Mg II subordinate line is about $4.6-6.7{\times}10^9erg\;cm^{-2}s^{-1}$, 15 - 22 % of the deposited energy. By comparison of these estimated energy fluxes we conclude that the continuum enhancement was directly produced by the non-thermal electrons.

• Biomedical Science Letters
• /
• v.24 no.1
• /
• pp.35-42
• /
• 2018

Postmortem interval (PMI) is very important in the crime scene investigation. However, it is very difficult to estimate of the interval since death after a decomposition. Recently, there have been various studies on the postmortem interval since a decomposition. In particular, the total body score (TBS) and accumulated degree days (ADD) used to estimate the postmortem interval after a decomposition. This study was conducted with the aim of applying the TBS and ADD to estimate the postmortem interval in real forensic caseworks. In first murder case, TBS was 12 and ADD value was 132, respectively. An estimated time of PMI was around 23:00 on June 21, and the suspect's statement was 01:20 on June 22. Our estimated interval since death and the suspect's statement for the PMI differ by only 2 hours and 20 minutes. In second forensic case, TBS was 3 and ADD value was 55, respectively, an estimated time of PMI was around 02:26 on September 23. The suspect's statement was 10:30 on September 23. Our estimated time and the suspect's statement for the PMI differ by 8 hours. In these cases, we were able to have confirmed the feasibility of TBS and ADD on the real forensic cases. Overall, our finding suggested that the quantitative method could be used to produce PMI estimates that are accurate to within days or even hours.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.279-282
• /
• 2012

Clinical-chemical traits are commonly used biomarkers to examine the health status of individuals. There is an appreciable range of normal variation in most clinical-chemical traits and the determining factors of this variation have been relatively uninvestigated in chickens. The aim of this study was to estimate the genetic parameters (i.e., heritability, genetic correlation) for 8 clinical-chemical traits (glucose, total protein, creatinine, high-density lipoprotein cholesterol, total cholesterol, glutamic oxaloacetic transaminase, glutamic pyruvic transaminase and amylase) in an $F_1$ intercross established by purebred breeding among the 5 lines of Korean native chickens. Phenotypic data were collected from approximately 600 $F_1$ animals. The genetic parameters for the clinical-chemical traits estimated by a mixed animal model using the restricted maximum likelihood method were presented. Estimated heritabilities ranged from 8.9% (glucose) to 39.6% (high-density lipoprotein cholesterol). Interestingly, both the sign and the size of the genetic and phenotypic correlations were largely different between the same several pair of clinical-chemical traits. The findings in this study will provide useful information to address issues in both quantitative trait locus study and genetic management in Korean native chickens.

• Nuclear Engineering and Technology
• /
• v.47 no.2
• /
• pp.204-211
• /
• 2015

Probabilistic safety assessment (PSA) has had a significant role in quantitative decision-making by finding design and operational vulnerabilities and evaluating cost-benefit in improving such weak points. In particular, it has been widely used as the core methodology for risk-informed applications (RIAs). Even though the nature of PSA seeks realistic results, there are still "conservative" aspects. One of the sources for the conservatism is the assumptions of safety analysis and the estimation of failure frequency. Surveillance, diagnosis, and prognosis (SDP), utilizing massive databases and information technology, is worth highlighting in terms of its capability for alleviating the conservatism in conventional PSA. This article provides enabling techniques to solidify a method to provide time- and condition-dependent risks by integrating a conventional PSA model with condition monitoring and prognostics techniques. We will discuss how to integrate the results with frequency of initiating events (IEs) and probability of basic events (BEs). Two illustrative examples will be introduced: (1) how the failure probability of a passive system can be evaluated under different plant conditions and (2) how the IE frequency for a steam generator tube rupture (SGTR) can be updated in terms of operating time. We expect that the proposed model can take a role of annunciator to show the variation of core damage frequency (CDF) depending on operational conditions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.43-49
• /
• 2002

A7003 alloy has characteristics of their excellent weldability, high corrosion resistance and superior plastic working however the broadening of application for the alloy has been hampered by the lower extrudability associated by Mg content. For improvement of extrudability and enhanced recovery efficiency during Al scrap recyeling, it has been generally practiced to reduce Mg content in A7003 alloy. Therefore, it is necessary to investigate the influence of Mg content on mechanical strength and extrudability of A7003 alloy. For efficient material processing which has small amounts, life cycle assessment in material processing(MLCA) is evaluated. The quantitative analysis of energy requirements and $CO_2$ emission for production of A7003 extruded bar are estimated with different Mg content and billet pre-heating process (heating source by light oil or LPG). In particular, the estimation of energy requirements was performed within shipping and gating range (except the mining and extraction stages)to investigate the influence of the variables on energy requirements and $CO_2$ emission in detail. As Mg content increased, the flow stress and the extrusion pressure for A7003 alloy increased. It has been thought that an increment in extrusion pressure with increasing Mg content is caused by the solid solution hardening of Mg atoms in the matrix and increment in volume fraction of intermetallic compound, $Mg_2Si$. The extrudability and the tensile strength are equal to, or above that of conventional A 7003 alloy even the content of Mg varied from $1.1wt.\%\;to\;0.5wt.\%$ alloy. This means that minimizing the content of Mg in A7003 alloy can enhance recovery efficiency during Al scrap recycling. It can be quoted that rather than Mg content energy source for billet heating is a prime factor to determine the atmospheric $CO_2$ emission.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.583-591
• /
• 2015

The coastal stow net (stow net hereafter) in Korea is one of the major fishing methods for yellow croaker (Larimichthys polyactis), ribbon fish (Trichiurus lepturus), and anchovy (Engraulis japonicus). In terms of energy efficiency, the stow net fishery is more competitive than towing fishing gears such as trawl gears. The fishing vessels in stow net fishery have consumed less fossil fuel and also have had less carbon dioxide emission into the atmosphere. however, the stow net fishery is necessary to be regulated due to its increased output of the fleet. Therefore, it is required for fisheries authorities to manage the fishing capacity or fishing power for the assurance of fishery's sustainability. For fisheries management authorities, it is necessary to quantify data related to fishing capacity and fishing power to deploy fishery policy in a sustainable way. In terms of data for decision-making, Data envelopment analysis (DEA) method was conducted to estimate fishing capacity. Fishing power index (FPI) was also applied to calculate relative fishing power to approach the problem in a quantitative way.

• Fire Science and Engineering
• /
• v.18 no.3
• /
• pp.57-73
• /
• 2004

Quantitative safety analysis through a fault tree method has been conducted for a fire broken out over the spilling LNG from a pilot LNG tank, which may have 4 types of scenarios causing potentially risky results. When we consider LNG release from venting pipelines as a first event, any specific radius of Low Flammable Limit(LFL) has not been built up. The second case of LNG outflow from the rupture of storage tank which will be the severest has been analyzed and the results revealed various diffusion areas to the leaking times even with the same amount of LNG release. As a third case LNG leakage from the inlet/outlet pipelines was taken into consider. The results showed no significant differences of LFL radii between the two spilling times of 10 and 60 minutes. Hence, we have known the most affecting factor on the third scenario is an initial amount of LNG release. Finally, the extent of LFL was calculated when LNG pipelines around the dike area were damaged. In addition, consequence analysis has been also performed to acquire the heat radiation and flame magnitude for each case.